SCHNEIDER 140AC013000

Regarding SCHNEIDER 140AC013000,I guess you may want to ask about SCHNEIDER 140ACO13000,because according to the information I have,SCHNEIDER’s product series includes the model 140ACO13000,and 140AC013000 may be an input error or a non-existent model.The following is a detailed introduction to SCHNEIDER 140ACO13000:

1.Basic information

Brand:Schneider

Model:140ACO13000

Type:Analog output module

Series:Modicon Quantum Automation Platform

II.Technical Specifications

Number of analog outputs:8 channels

Loop voltage:6~30V DC

Voltage drop:25mA at 6~30V

Analog output range:

420mA,04095 counts

420mA,016000 counts

025mA,025000 counts

SCHNEIDER 140AC013000

020mA,020000 counts

Absolute accuracy error:±0.2%full scale(at 25°C)

Linearity:±4µA(420mA,016000 counts);±4µA(025mA,025000 counts);±4µA(020mA,020000 counts);±12µA(420mA,04095 counts)

Temperature offset accuracy:0.007%full scale/°C(maximum);0.004%full scale/°C(typical)

Insulation between each channel and the bus:1780V for 1 minute AC

Update time:5ms

Setup time:1.6ms to 5%final value;3.2ms to±0.1%final value

Power consumption:5W

External power supply requirement:6~30V

III.Features and advantages

Powerful processing capability:Among the existing PLC systems,the processing speed is the fastest.

Flexible architecture:You can freely configure a variety of architectures such as local I/O,remote I/O,distributed I/O and fieldbus,and you can also mix and match them.

Perfect system reliability design:Power supply,communication,etc.can be redundant,and the system can be hot-backed up as needed,and automatically switched in case of failure.

Easy to use:All templates support hot-swap and can be replaced online.At the same time,the module also has high-performance isolation technology to avoid electrical noise interference;high current output can drive larger loads without external relays.

SCHNEIDER 140AC013000

IV.Application scenarios

SCHNEIDER 140ACO13000 analog output module is widely used in industrial automation systems,such as automatic control on production lines,start and stop control of mechanical equipment,automatic switch control of security access control systems,and precise opening control of valves.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl