MRU2 KONGSBERG roll and pitch motion sensor

Product Description

The MRU2 KONGSBERG roll and pitch motion sensor is used to measure the roll and pitch motion of ships,offshore platforms,and other underwater structures

feature

•Output high-precision roll and pitch measurements

Suppress horizontal acceleration center of gravity(CG)when installed overboard

•RS-232,RS-422,and Ethernet outputs

High output data rate(200 Hz)

High reliability and no mechanical wear parts

Small size,light weight,and low power consumption

Each MRU comes with a calibration certificate

•Optional communication protocol based on Windows

MRU configuration software

MRU 2 is commonly used for roll and pitch measurement in offshore riser monitoring systems,dynamic positioning systems,remote communication antenna systems,and motion damping systems on high-speed ships.The device must be installed in a fixed direction relative to the ship and is most suitable for applications with limited rolling and pitching ranges.If infinite installation direction and/or range are required,it is recommended to choose an MRU model with sensors on all three axes.

MRU 2 includes two high-precision accelerometers and two MEMS angular rate gyroscopes.This device achieves high reliability by using solid-state sensors with non rotating or mechanically worn components.The device is equipped with Windows based configuration and data display software.By using a vector configuration between MRU and the center of gravity(CG)of the ship,the device will output accurate roll and pitch measurements even if MRU 2 is installed at a high position on the ship,such as on the bridge.This is due to the ability to enhance the impact of horizontal acceleration on roll and pitch performance.This makes MRU 2 superior to flow meters,swing devices,and standard vertical reference devices.

MRU 2 outputs static and dynamic roll and pitch angles,as well as corresponding angular rate vectors.The device outputs surge and sway acceleration.

MRU data can be obtained through Ethernet interfaces and serial cables,making it easy to distribute MRU data to multiple users on board.The output data is available on two separately configurable serial lines and Ethernet/UDP.The output variables are transmitted in IEEE 32-bit floating-point(recommended)or scaled integers.In addition,ASCII based NMEA 0183 proprietary statements can be chosen as the data output protocol.

application area

The MRU2 KONGSBERG roll and pitch motion sensors are widely used in ship navigation,positioning,marine scientific research,and other related fields.

POLYOL 15%, POLYOLMER POLYOL 15%, POLYOLMER 15%, POLYMERIC POLYOL 15%, POLYMERIC 15%, WANOL F3115P, PPG-3601, PPG 3601, Y-1537, HL-109,LPOP-2015

POLYOL 25%, POLYOLMER POLYOL 25%, POLYOLMER 25%, POLYMERIC POLYOL 25%, POLYMERIC 25%, WANOL F3125P, KE-1950, PPG-3602, PPG 3602, Y-1564, HL-108, ARCOL-1366, LPOP-2025

POLYOL 45%, POLYOLMER POLYOL 45%, POLYOLMER 45%, POLYMERIC POLYOL 45%, POLYMERIC 45%, WANOL F3145P, WANOL F3148P, CS-743, Y-7930, V-3943A, HS-100, LH-50, LH-100, LH-200, LUPRANOL-4600, LHS-50, LHS-100

WANOL POP2045, WANOL POP2140, WANOL POP3630, WANOL POP3628, WANOL F3135, WANOL F3140, WANOL F3150, WANOL F3160, WANOL F3180, KE-878N, HL-400, INOVOL, PURANOL, WANOL, LUPRANOL, ARCOL