METSO 02VA0082

METSO 02VA0082

The METSO 02VA0082 is a product manufactured by Metso Corporation. Unfortunately, there is limited information available about this specific product. Without more specific details, it is challenging to provide accurate content and parameters for the product. It is recommended to refer to the official Metso Corporation website or contact their customer service for more detailed information about the METSO 02VA0082.

Conceptronic HVA 102 High Velocity Forced Convection O

CROWNE 30SP36 TL Order PICKER FORKLIFT 3000 LBS

Adept Cobra 600 Robot Robotic Arm

3 Lindgren RF Enclosures Radio Frequency

Branson Ultrasplice 502 830M Ultrasonic Welder

Fusion UV Systems Electro Deless Lamp P300MT

GCI Crane Lift Industrial Arm Suction Pneumatic

Gallmeyer&Livingston No.45 Surface Grinder

Veet 3R Precision Radial Arm Drill

Florida Feeders FH-2 FB-18 FF-18 FI-9 Feeder

METSO 02VA0082 is an electric actuator mainly used to control the opening and closing of valves.The following are the parameters and usage methods of the product:

Product parameters:

Power supply voltage:24V DC

Control signal:4-20mA

Angle of actuator:90 degrees

Maximum output torque:35Nm

Protection level:IP67

Working temperature:-30℃to+60℃

Usage:

1.Install the actuator on the valve to ensure secure installation.

2.Connect the power supply and control signal wires to ensure correct wiring.

3.Turn on the control system and send a control signal.The actuator will control the opening and closing of the valve based on the signal.

4.During use,pay attention to the operating temperature range of the actuator to avoid damage caused by exceeding the range.