MAP55-4004

MAP55-4004

Status: In Stock

Here are some key features and parameters of the MAP55-4004:

Measurement Range: The sensor can measure pressure within a specific range, usually stated in kilopascals (kPa). The specific range for the MAP55-4004 may vary depending on the manufacturer’s specifications.
Accuracy: It is important for a map sensor to provide accurate readings. The accuracy of the MAP55-4004 is usually stated in terms of the percentage of full-scale span (%FS). For example, a typical accuracy may be ±1% FS, meaning the sensor’s measurements can deviate by up to 1% of the full-scale range.
Temperature Range: The sensor should operate effectively within a specific temperature range. The temperature range is usually stated in degrees Celsius (°C) or Fahrenheit (°F). For example, the MAP55-4004 may have a temperature range of -40°C to 125°C.
Output Signal: The output signal of the MAP55-4004 is typically a voltage or frequency signal that corresponds to the measured pressure. Common output signals include a 0-5V or 0-10V analog voltage or a pulse-width modulation (PWM) signal.
Electrical Connection: The sensor may have specific requirements for electrical connection, such as the voltage supply and ground connections. It is crucial to follow the manufacturer’s instructions for proper wiring.
Physical Dimensions: The size and shape of the sensor may vary depending on the manufacturer. It is important to consider the physical dimensions, especially when replacing an existing sensor or integrating it into a system.
Environmental Protection: Depending on its intended application, the MAP55-4004 may have specific environmental protection ratings, such as IP65 (dust-tight and protected against water jets) or IP67 (dust-tight and protected against immersion up to 1 meter). These ratings ensure the sensor’s durability in harsh conditions.

MAP55-4004 Power Solutions

The MAP55-4004 Power Solutions is a power supply unit designed for use in various applications. It features a compact and efficient design, making it suitable for both industrial and commercial use.

The power supply unit offers a high level of reliability and performance, ensuring stable and consistent power delivery. It is capable of handling voltage inputs ranging from 100V to 240V, making it compatible with a wide range of electrical systems.

The MAP55-4004 Power Solutions is equipped with multiple output channels, allowing for simultaneous power supply to multiple devices or systems. This makes it ideal for use in multi-device setups or applications that require the use of different voltage levels.

Additionally, the unit features built-in overload and short circuit protection, ensuring the safety of connected devices in the event of electrical faults. It also has a built-in cooling fan to prevent overheating and maintain optimal operating temperatures.

The MAP55-4004 Power Solutions is designed to be easy to install and use, with clear labeling and intuitive controls. It is built to withstand harsh working conditions, with a rugged and durable construction.

Overall, the MAP55-4004 Power Solutions is a reliable and versatile power supply unit that is suitable for a wide range of applications. It provides stable power delivery, multiple output channels, and robust protection features, making it a reliable choice for powering various devices and systems.

MAP55-4004插图

INDRAMAT Servo Controller TDM1.2-050-300-?W1-220 NEU

INDRAMAT AC-Servo Controller TDM-3.3-030-300?-W1

Indramat 232708-08068 A11 RAC Spindelantrieb

INDRAMAT AC-Servo Power Supply TVM-1.2-50-W0-2?20V

Indramat KDS 1.1-100-300 W1-2 Spindelregler

Indramat Umrichter RAC.Board 256047-02820-A04

Indramat RAC 2.1-200-300 or RAC2.1-200-300 Reparatur

INDRAMAT KDA 3.3-050-3-A00-W1

MAP55-4004插图1

The MAP55-4004 is a product that is primarily used in industrial and commercial applications. It is a type of map sensor that measures absolute pressure in the intake manifold of an engine. The information provided by this sensor is crucial for the engine control unit (ECU) to calculate the appropriate fuel injection, ignition timing, and turbocharger boost pressure.

Here are some key features and parameters of the MAP55-4004:

Measurement Range: The sensor can measure pressure within a specific range, usually stated in kilopascals (kPa). The specific range for the MAP55-4004 may vary depending on the manufacturer’s specifications.
Accuracy: It is important for a map sensor to provide accurate readings. The accuracy of the MAP55-4004 is usually stated in terms of the percentage of full-scale span (%FS). For example, a typical accuracy may be ±1% FS, meaning the sensor’s measurements can deviate by up to 1% of the full-scale range.
Temperature Range: The sensor should operate effectively within a specific temperature range. The temperature range is usually stated in degrees Celsius (°C) or Fahrenheit (°F). For example, the MAP55-4004 may have a temperature range of -40°C to 125°C.
Output Signal: The output signal of the MAP55-4004 is typically a voltage or frequency signal that corresponds to the measured pressure. Common output signals include a 0-5V or 0-10V analog voltage or a pulse-width modulation (PWM) signal.
Electrical Connection: The sensor may have specific requirements for electrical connection, such as the voltage supply and ground connections. It is crucial to follow the manufacturer’s instructions for proper wiring.
Physical Dimensions: The size and shape of the sensor may vary depending on the manufacturer. It is important to consider the physical dimensions, especially when replacing an existing sensor or integrating it into a system.
Environmental Protection: Depending on its intended application, the MAP55-4004 may have specific environmental protection ratings, such as IP65 (dust-tight and protected against water jets) or IP67 (dust-tight and protected against immersion up to 1 meter). These ratings ensure the sensor’s durability in harsh conditions.

MAP55-4004插图2