IC698CMX016 VMIVME-5567-000 350-005567-000 GE control memory exchange module

Status: In Stock

Model:IC698CMX016 VMIVME-5567-000 350-005567-000

Brand:GE

Manufacturer:GE Fanuc

Series:PACSystem RX7i

Product Description

IC698CMX016 is a control memory exchange module.It is part of the PACSystem RX7i platform and is currently part of Emerson Automation,previously produced by the GE Intelligent Platform(GE IP).This module is mainly used to provide deterministic data sharing between PLCs and compatible devices on fiber optic networks using reflective memory technology.It is equipped with 16MB SDRAM,with a working voltage of+5VDC,provided by a power supply,and a current requirement of 1.8 amperes.This module needs to be installed on the mainframe and connected to slots 3 or 4.It is equipped with a fiber LC type,with an insertion loss of 0.35 dB(maximum)and a return loss of-30 dB.

characteristic

Efficient memory management

Highly reliable performance

Highly stable and reliable

Operating in various industrial environments

IC698CMX016 is a control memory exchange module from the PACSystem RX7i platform of the Programmable Automation Controller(PAC).This component is essentially a memory module,however,the main function of IC698CMX016 is to provide deterministic data sharing between PLCs and compatible devices on fiber optic networks using reflective memory technology.

This module is equipped with 16 MB SDRAM reflective parity memory.It is installed on the RX7i rack and occupies a single slot on the backplane.This module is independent of the CPU as it does not require any CPU processing to operate.In addition,it is compatible with the VMIC5556 series reflective storage device network.

The communication interface of IC698CMX016 includes an LC fiber port that supports a transmission speed of 2.12 Gbaud on multimode fiber media with a maximum distance of 300 meters or 984.25 feet.The supported dynamic packet sizes range from 4 to 64 bytes(with a maximum network transfer rate of 43 megabytes/second in 4-byte packets)to 174 megabytes/second(64 byte packets).This memory module can communicate with up to 256 nodes per network and supports redundant transmission mode operation.

The front panel of IC698CMX016 is equipped with various LED status indicators,such as OK,CONFIG,OWN DATA,and SIGNAL DETECT.To leverage the functionality of IC698CMX016,it must be installed on an RX7i CPU with firmware version 2.00 or higher,an RX7i CPU rack with power supply,and configured using Proficy Machine Edition–Logic Developer PLC 4.5 or higher.

The GE Fanuc IC698CMX016 communication module is the control memory Xchange or CMX module of the Rx7i system.This module provides pre programmed data sharing between the PLC on the high-speed fiber optic network reflection storage system and the connected field devices.The IC698CMX016 module can accommodate up to 256 nodes in a single reflective storage network and is compatible with VMIC 5565 series reflective storage devices connected to each node.Each VMIC 5565 device is connected to a 2.12 GBaud fiber optic network through a daisy chain loop through fiber optic cables.The IC698CMX016 communication module can transmit on-site data within a configurable transmission range of 43 megabytes per second(4 byte dynamic packet size)to 174 megabytes per second(64 byte dynamic packet size inclusive).It has 16 MB of user memory(SDRAM)and reliable software configuration from Machine Edition(ME)Logic Developer PLC version 4.5 or higher software.

The rated voltage of the GE Fanuc IC698CMX016 module is 5.0 V DC and the maximum operating current is 1.8 amperes.On the front panel of the IC698CMX016 module,there is an optical transceiver with two fiber optic ports labeled TX and RX for transmitting and receiving on-site data.The IC698CMX016 module provides user configurable VME bus output,which initiates data transmission on the network and also provides network error detection to achieve smooth data transmission.The IC698CMX016 module is installed in a single slot in the Rx7i PACsystem I/O rack.It is equipped with four front panel status/diagnostic indicators,which are OK CONFIG(normal configuration),OWN DATA(down data),and Signal DETECT(signal detection)indicators,used to display the operation and communication status of the module.

application area

IC698CMX016 VMIVME-5567-000 350-005567-000 GE control memory exchange module is widely used in various industrial control systems,including automation equipment,mechanical manufacturing,power systems,etc.

    Reviews

    There are no reviews yet.

    Be the first to review “IC698CMX016 VMIVME-5567-000 350-005567-000 GE control memory exchange module”
    Review now to get coupon!

    Your email address will not be published. Required fields are marked *

    Back to Top

    Search For Products

    Product has been added to your cart