Product Description
IC697CPX928 is a high-performance central processing unit(CPU)module designed with a single slot chassis.It integrates 6MB of battery powered memory and 256KB of non-volatile user flash memory to provide powerful data processing and storage capabilities
feature
6MB battery powered memory and 256KB non-volatile user flash memory
The processor speed is 96MHz
The execution time of each Boolean function is 0.4µs
Supports 32-bit floating-point data
Has one RS232 serial port,two RS485 serial ports,and one factory reset port
Compatible with various optional modules to enhance the CPU and provide additional functionality
IC697CPX928 is a central processing unit(CPU)module in the GE Fanuc 90-70 series.It is mainly used to execute user programs downloaded into CPU memory,with high-speed processing capability and large capacity memory to meet the needs of industrial automation and control systems.This module uses an 80486DX4 microprocessor and is equipped with 6MB battery backup RAM and 256KB non-volatile user flash memory to ensure data reliability and stability.In addition,the module also supports multiple communication protocols and interfaces,facilitating communication and integration with other devices and systems.
General Electric(GE)IC697CX928 is a 90-70 central processing unit(CPU)module.This CPU has 6MB of battery supported memory,256kb of non-volatile user flash memory,a processor speed of 96MHz,and a typical scan rate of 0.4 times each Boolean function.This processor has one(1)RS232 serial port,two(2)RS485 serial ports,and one(1)factory reset port.
The catalog number for General Electric Farouk 90-70 series modules is ic697cpx928,which is a central processing unit(CPU)primarily used to execute user programs downloaded into CPU memory.This CPU module is a single slot chassis,characterized by an 80486DX4 microprocessor with a speed of 96 MHz and each Boolean function executing 0.4 times.This module is equipped with a 6MB battery connected memory and 256kb non-volatile user flash memory,where CPU firmware is also stored.
IC697Cpx928 can handle any combination of up to 12K inputs and outputs,up to 8K analog inputs and outputs.It supports 32-bit floating-point data.
ICC697Cpx928 was configured using programming software.It does not have jumper terminals or DIP switches for hardware parameter settings.Application software is written by MS-DOS software products or Windows software products,which run on Windows 95 or Windows NT through Ethernet/IP or SNP ports.
This controller is specifically equipped with seven(7)status LEDs,a lithium battery to retain the content of random access memory(RAM),and communication ports such as(1)RS232 serial port,(2)RS485 serial port,and(1)factory reset port.
IC697Cpx928 is compatible with various option modules,which can enhance the CPU and provide additional features.These option modules include Ethernet interface modules,programmable coprocessors,alphanumeric coprocessors,bus controllers,communication modules,I/O link interfaces,and the entire IC697 discrete and analog I/O module family.
The nominal current required for the IC697Cpx928 module is 3.1 amperes.The input voltage is 5 volts DC.The module has a forced air cooling level of 70 CFM and can operate in ambient temperatures ranging from 32 to 140 degrees Fahrenheit.
Without forced air cooling,the operating temperature range of the IC697CPX928CPU module will be reduced to 32-122 degrees Fahrenheit.Depending on the available power supply type,120 volt AC,240 volt AC,or 24 volt DC drive rack fan components can be installed on the IC697Cpx928 module.The CPU module has 3 serial ports,with 2 ports supporting RS-485 communication and 1 port supporting RS-232 communication.These serial ports can be used to interface with programming devices configured by the CPU.In addition,optional Ethernet modules can also be installed on the PLC to enable configuration of the IC697cx928 module on the Ethernet network.The I/O supported by the ic697cpx928 module includes up to 8000 analog I/Os and 12000 I/Os in any combination.The IC697cpx928 module requires a slot to be installed on the General Electric Series 90-70 PLC rack.A total of 7 light-emitting diodes are provided on the front of the module to update the status.
application area
The IC697CPX928 GE Central Processing Unit(CPU)module is used as a central processing unit(CPU)module in industrial automation and control systems.
Reviews
There are no reviews yet.