IC660BBD110 GE 16 point discrete input module

Status: In Stock

Model:IC660BBD110

Brand:GE

Manufacturer:General Electric Fanuc

Series:Genius Block I/O

Weight:1.8 kilograms

Product Description

The IC660BBD110 module is designed to provide 16 discrete input points for GE programmable logic controller(PLC)systems.

feature

Optional threshold

On/off threshold for each group of eight inputs

The configurable on/off threshold range is 25%to 85%of the incoming voltage

Advanced Diagnosis

Fault reporting can be enabled or disabled on a circuit by circuit basis

The GE Fanuc Genius IC660BBD110 115 VAC 16 Circuit Discrete Input Module is an intelligent configurable module that provides interfaces for 115 VAC discrete input sensors.This module has 16 115 VAC circuits-two sets,each with 8 circuits.

The typical input of this block is the contact closure of a switch,button,or limit switch.This block can be used with 2-wire and 3-wire proximity switch inputs.The control power of this module comes from the power cord that provides input.No separate block power supply is required.

GE Fanuc IC660BBD110 is an independent block I/O with sixteen(16)input points.This module supports the Genius bus communication protocol,allowing it to be installed near the machine without the need to install a motherboard,processor,or communication adapter along the module.This module is an intelligent input module that supports daisy chain topology and reports directly to controllers or communication adapters connected to the same network.

The IC660BBD110 input channel is designed to receive signals with a voltage range of 93-132VAC,a frequency of 47-63 Hz,and a nominal value of 115VAC.For both ON and OFF states,the programmable threshold is 25%to 85%.The module is also equipped with internal channel diagnostic function,which can detect open and short circuit wires.The two diagnostic attributes also have programmable thresholds of 25%-85%and fixed thresholds of 10%-90%,respectively.The input processing time of this module is 1 ms,and the software can configure the input filter to be 10 to 100 ms with increments of 10 ms.This input filter can suppress noise and signal rebound.

The IC660BBD110 module measures 8.83 inches(22.44 cm)x 3.34 inches(8.48 cm)x 3.91 inches(9.93 cm)(height x width x depth)and weighs 4 pounds.(1.8 kilograms).It is equipped with LED indicator lights,such as unit normal,I/O enabled,and individual input LEDs.It has 1500V internal isolation from ground to serial bus.

IC660BBD110 is connected to the Genius bus through a terminal block installed below the module LED indicator lights.This terminal is a 3-pin terminal that can be accessed by opening the hinged door.This module can be installed facing up or upside down.

The IC660BBD110 discrete input module has advanced diagnostic functions and optional thresholds.Some of the most common input connection contacts are closed and connected to devices such as switches,limit switches,and buttons.It can be connected to 2-wire proximity switch inputs and 3-wire proximity switch inputs.

The GE Fanuc Genius IO IC660BBD110 discrete input block can operate safely and at full power within a temperature range of 32 to 140 degrees Fahrenheit(0 to 60 degrees Celsius),and can be safely stored in environments ranging from-40 to 100 degrees Celsius.212 degrees Fahrenheit(-40 to 100 degrees Celsius).The IC660BBD110 discrete input block has a safe environmental humidity level between 5%and 95%during operation and storage,without condensation.The input block weighs 4 pounds or 1.8 kilograms.The dimensions are 8.8 x 3.3 x 3.9 inches(22.4 x 8.4 x 9.9 centimeters).For device protection,the IC660BBD110 discrete input block can be configured through software to detect short circuit and open circuit faults.

application area

The IC660BBD110 GE 16 point discrete input module is commonly used in industrial automation,process control,mechanical equipment and other fields,and can be used in conjunction with control systems to achieve the acquisition and processing of discrete input signals.

IC660BBD110 GE 16 point discrete input module插图

    Reviews

    There are no reviews yet.

    Be the first to review “IC660BBD110 GE 16 point discrete input module”
    Review now to get coupon!

    Your email address will not be published. Required fields are marked *

    Back to Top

    Search For Products

    Product has been added to your cart