GE IC697MDL653

GE IC697MDL653

The GE IC697MDL653 is a 24VDC positive/negative logic input module for the GE Fanuc Series 90-70 PLC system. It has 32 input points arranged in four isolated groups of eight. The module is designed to accept a wide range of input signals, including AC or DC voltage, contact closure, or TTL logic. It features LED indicators for each input point to provide visual status indication and diagnostic information. The module is hot-swappable, allowing for easy replacement without interrupting system operation.

The GE IC697MDL653 is a 24VDC Positive/Negative Logic Input Module from the GE Fanuc 90-70 Series. It provides 32 input points in four isolated groups of eight. The module is designed to interface with a wide range of input devices, including switches, sensors, and other digital devices.

The IC697MDL653 module has the following specifications:

• Input voltage range: 18-30VDC
• Input current: 7mA maximum per point
• Isolation: 1500VAC for 1 minute between field and logic
• Input response time: 1ms maximum
• LED indicators for each input point and group
• Hot-swappable and hot-insertable

The module can be configured using GE Fanuc’s Proficy Machine Edition software, which allows users to set input filtering, debounce time, and other parameters. The module also supports fault detection and reporting, including open wire detection and short circuit detection.

Schneider Gould Modicon AS-B832-016 Output Module 24V*

NEW SCHNEIDER ANALOG INPUT RTD PLC MODULE AS-BADU-214

NEW SCHNEIDER ANALOG INPUT RTD PLC MODULE AS-BADU-214

Schneider Gould Modicon AS-B873-011 Analog Input Module

Schneider PLC Output Module TSXDSZ08T2 NIB!

Schneider/Telem​ecanique PLC Output Module TSXASZ401 NIB

Schneider/Modic​on PLC I/O Module TSXDMZ28DR NIB!

Schneider PLC Expansion Module TM2DRA8RT(TWDDRA8RT)

Schneider Expansion Module TM2DDI16DT(TWDDDI16DT)NIB!

GE IC697MDL653 is a digital output module with the following parameters and specifications:

1.Output type:switch type output,each channel can be configured as NPN or PNP output.

2.Output quantity:32 digital output channels.

3.Output voltage:24V DC.

4.Output current:0.5A maximum.

5.Output protection:It has overcurrent and short circuit protection.

6.Working temperature:0~60℃.

7.Storage temperature:-40~85℃.

8.Dimensions:The standard GE Fanuc 9 slot module is 11.2 x 3.5 x 17.5 cm.

9.Weight:about 0.5kg.

10.Power demand:5V DC.

11.Communication interface:communicate with GE Fanuc series PLC.

12.Programming software:The programming software of GE Fanuc series PLC can be used for programming.