GE IC670PBI001

GE IC670PBI001

Product Description:

The GE IC670PBI001 module has 16 single ended or 8 differential input channels, each with a resolution of 12 bits. It can accept analog signals from various sensors and devices and convert them into digital signals for PLC processing. This module adopts high-precision analog conversion technology, which has high accuracy and stability.

Product parameters:

-Number of input channels: 16 single ended or 8 differential

-Resolution: 12 bits

-Input range: -10V to+10V or 0V to+10V

-Sampling rate: 10ms/channel

-Power supply voltage:+5V DC

-Current consumption: 0.5A

-Working temperature: 0 ℃ to 60 ℃

-Storage temperature: -40 ℃ to 85 ℃

-Humidity range: 5% to 95% (without condensation)

Usage:

1. Insert the IC670PBI001 module into the slot of the Series 90-70 PLC.

2. Connect the input channel of the module to the analog output port of the sensor or device.

3. Configure the PLC program to read the input signals of the module.

4. Calibrate and adjust as needed to ensure that the digital signal output by the module accurately reflects the input signal.

5. During use, pay attention to keeping the environment of modules and sensors/equipment dry, clean, and stable to ensure optimal performance and lifespan.

The IC670PBI001 module has the following specifications:

• Communication protocol: Profibus DP-V0 and DP-V1
• Communication rate: 9.6 kbps to 12 Mbps
• Maximum number of nodes: 126
• Maximum cable length: 1200 meters
• Operating temperature range: -40°C to 85°C
• Power supply: 5V DC, 0.5A
• Dimensions: 4.4 x 12.6 x 10.2 cm
• Weight: 0.2 kg

The module is equipped with two LED indicators that provide status information on the module’s power and communication status. It also has a removable terminal block for easy installation and maintenance. The IC670PBI001 module is a reliable and cost-effective solution for integrating a GE Fanuc Series 90-70 PLC with a Profibus network.

Cognex Camera Insite 4000

DVT/Cognex Color Inspection Camera 542C

Cognex In-Sight 5100 Series cable 185-0248 rev A

Cognex Cable 300-0099-15 New

Cognex KV-7100N-PKG-E 7000-0015-01

Cognex Cable 300-0099-15 Used

COGNEX VISION CONTROL 4400 FRAME GRABBER 44124-003 MODU

Cognex 4000-9901 Camera Control Panel Box Enclosure

COGNEX ISS-5400-0000 USPP ISS54000000

Cognex VPM-59416-00S Vision System

FUJI 4800 VME:48316-32F VISION CONTROL BOARD BY COGNEX

Cognex In-sight 1010 800-5749-1 Breakout Module Q new