GE IC660BBD025

GE IC660BBD025

The GE IC660BBD025 is a part of the VersaMax series of PLC (Programmable Logic Controller) modules manufactured by General Electric (GE). This specific module is a 24V DC Input module with 16 discrete input points. It is designed to be used in industrial automation and control systems to monitor the status of various devices or sensors.

Here is some product information and parameters for the GE IC660BBD025 module:

1. Input Type: Digital input module.
2. Input Voltage: 24V DC (Direct Current).
3. Number of Input Points: 16 discrete input points.
4. Input Signal: These input points can be used to monitor the status of devices such as switches, push buttons, proximity sensors, or any other 24V DC compatible digital signal sources.
5. Isolation: The module typically provides electrical isolation between the input side and the logic side to protect the PLC from voltage spikes and noise.
6. Compatibility: The IC660BBD025 module is designed to be compatible with the GE VersaMax series PLC systems.

The GE IC660BBD025 is a Genius I/O block that provides 16 discrete input points. It is part of the GE Fanuc Series 90-30 PLC system and is designed for use in industrial automation applications. The IC660BBD025 module is compatible with a wide range of sensors and switches, and it can be easily configured and programmed using GE’s programming software. It features a compact design, high-speed processing, and reliable performance, making it an ideal choice for a variety of industrial control applications.

GE SIZE 5 REVERSING-CR306G0**MAH W/CR306G0**MCH

440-480V 50-60HZ COIL

NORTEL SHASTA SSC Subscriber Service Card new

ITE Siemens MOMN6240L motor operator 240VAC MD6,ND6

GE Safety Swtich THN3366SS 600a 600v Stainless Steel!

RELIANCE 2SR41800 SNUBBER CONTROL 460v 1800 WATT GOOD!

Gould Modbus Port Multiplexer NW-0278

WESTINGHOUSE SIZE 6 A201K6CAC CONTACTOR

2045A45G01

Parameters and configuration of the module may include:

1. Input Type Configuration: You can configure each input point as either a sinking or sourcing input based on the requirements of your application.
2. Input Status Indicators: The module may have status indicators (e.g., LEDs) for each input point to display their current state.
3. Input Filtering: Some modules may provide options for input filtering to reduce the effects of noise or signal fluctuations.
4. Module Addressing: The module will have an address that is set in the PLC’s configuration software, allowing the PLC to read the status of the input points.

Please note that specific details and parameters may vary depending on the exact model and firmware version of the IC660BBD025 module. To configure and use this module effectively, you will need the appropriate GE PLC hardware, software, and documentation. It’s essential to consult the product manual or contact the manufacturer or distributor for the most up-to-date and detailed information on the module’s specifications and configuration.