GE D20C TERMINATION

GE D20C TERMINATION

The GE D20C is a digital protective relay used in power distribution and control systems. It provides protection, monitoring, and control functions to ensure the safe and reliable operation of electrical equipment. The termination description for a GE D20C relay typically refers to how the relay is connected to the electrical system, including the wiring and connections.

The specific termination description for a GE D20C relay can vary depending on the application and the electrical system it is installed in. However, here are some common elements that might be included in a termination description:

1. Power Supply Connections: The D20C relay requires a power supply to operate. The termination description would specify the connections for the power supply, including voltage and current ratings.
2. Current Transformers (CTs) and Voltage Transformers (VTs): CTs and VTs are used to measure current and voltage in the electrical system. The termination description would indicate how these transformers are connected to the relay.
3. Control and Communication Wiring: The D20C relay may have inputs and outputs for control and communication purposes. This could include connections for remote control, monitoring, or communication with a supervisory control and data acquisition (SCADA) system.
4. Protection Inputs: The relay typically has inputs to receive signals from current and voltage sensors to detect faults or abnormal conditions in the electrical system. The termination description would specify how these sensors are connected.
5. Output Contacts: The D20C relay can also have output contacts that can be used to trip circuit breakers or activate alarms in the event of a fault. The termination description would detail how these contacts are connected to the system.
6. Grounding and Shielding: Proper grounding and shielding of the relay’s wiring are crucial for safety and to prevent interference. The termination description might include information on how to properly ground and shield the relay.
7. Terminal Block Layout: A diagram or description of the terminal block layout on the D20C relay can be included in the termination description. This helps electricians and engineers understand where to make connections.

It’s important to note that the specific termination description can vary based on the model and configuration of the D20C relay, as well as the requirements of the electrical system it is installed in. Therefore, it’s essential to consult the relay’s documentation and guidelines provided by GE for the most accurate and up-to-date information on how to terminate and connect the relay in a given application.

LINCOLN KLEENSEAL 81741 MEASURING CONTAINER VALVE NIB

VICKERS EEA-EDC-436-A1-​32 POWER AMPLIFIER EEAEDC436A132

UVPS COMPACT RADIOMETER UV PROCESS SUPPLY

PACIFIC SCIENTIFIC SC722A-001 SERVO DRIVE SC722A001

MAGNETROL 832-1000-C00 LEVEL SWITCH 8321000C00 NEW

NATIONAL INSTRUMENTS PCI-MIO-16E-4 DAQ CARD

SIEMENS 6SN1123-1AB00-0​AA1 MODULE 6SN11231AB000AA​1 NIB

ALLEN BRADLEY 2711-K6C8 SER.B PANELVIEW 2711K6C8

The GE D20C is a digital controller designed for industrial automation applications. It is a versatile and reliable controller that can be used in a wide range of applications, including power generation, oil and gas, water and wastewater, and manufacturing.

Some of the key features and parameters of the GE D20C include:

• Processor: 32-bit ARM Cortex-A8 processor
• Memory: 512 MB RAM, 512 MB flash memory
• Operating system: Linux
• Communication protocols: Modbus RTU, Modbus TCP/IP, DNP3, IEC 61850, OPC UA, SNMP, BACnet, and more
• Input/output modules: Supports up to 32 digital inputs, 32 digital outputs, 16 analog inputs, and 8 analog outputs
• Display: 5.7-inch color touchscreen display with a resolution of 640 x 480 pixels
• Power supply: 24 VDC or 100-240 VAC
• Operating temperature: -20°C to 70°C
• Certifications: CE, UL, cUL, and more

Overall, the GE D20C is a powerful and flexible controller that can be customized to meet the specific needs of a wide range of industrial automation applications.