DS200FSAAG2ABA GE supply amplifier board

Status: In Stock

Model:DS200FSAAG2ABA

Brand:GE

Manufacturer:GE Boards&Turbine Control

Series:Mark V DS200

Product Description

The DS200FSAAG2ABA GE amplifier board is mainly used to amplify signals,enhance signal strength,and facilitate subsequent signal processing or driving equipment.

feature

High precision amplification:using advanced amplification technology to provide high-precision signal amplification.

Broadband response:With a wide frequency response range,it can process signals of different frequencies.

Low noise design:Adopting a low noise circuit design to reduce noise interference during the amplification process.

Good stability:using high-quality materials and strict production processes to ensure the stability and reliability of the product.

Easy to integrate:With standard interface and size design,it is easy to integrate with other devices or systems.

DS200FSAAG2ABA GE is a high-performance amplifier board that provides high-precision,wideband,and low-noise amplification functions.It adopts advanced amplification technology and high-quality materials to ensure the stability and reliability of the product.At the same time,it also has the characteristic of easy integration,making it convenient for users to integrate it into various industrial automation,process control,and testing and measurement systems.

The DS200FSAAG2ABA GE amplifier board adopts a compact design with multiple input and output interfaces,making it easy to connect with various sensors,actuators,and other devices.It also has flexible power supply methods to adapt to different power environments.In addition,the amplifier board also provides rich protection functions,such as overcurrent,overvoltage,overheating,etc.,to ensure the safe and stable operation of the product.

The General Electric Field Supply amplifier board DS200FSAA2A has 5 jumper machines,a 10 pin connector,and two fuses.It also has multiple testing points.In addition to the 10 pin connector,the General Electric Field Supply amplifier board DS200fsaag2aba also has four 2-pin connectors,so the board can be connected to multiple cables and must be disconnected and reconnected during replacement.To avoid costly errors,it may increase the downtime of the drive and make replacement quick and easy,write the identifier of the cable connected connector on the length of the tape.Then,tie the tape to the cable.Only then can you disconnect the cable from the board.When you are ready to reconnect the cable,use the identifier to locate the connector and reconnect the cable.

When disconnecting cables,please follow some guidelines to prevent damage.Just grab the cable at the connector end to remove it.If you pull out the cable section,it will cause pressure on the cable and may damage the cable due to pulling out the wires.This is especially true for ribbon cables,as multiple wires are very fine and the connection from the ribbon to the connector is not well supported.When you reconnect them,make sure the cables are fully seated in the connectors so that all signals can pass through the board.If the connectors have retaining clips to hold the position of the board,make sure they are connected.

application area

The DS200FSAAG2ABA GE amplifier board is widely used in industrial automation,process control,testing and measurement fields.

    Reviews

    There are no reviews yet.

    Be the first to review “DS200FSAAG2ABA GE supply amplifier board”
    Review now to get coupon!

    Your email address will not be published. Required fields are marked *

    Back to Top

    Search For Products

    Product has been added to your cart