DS200CPCAG1ABB GE contactor guide plate

Status: In Stock

Model:DS200CPCAG1ABB

Brand:GE

Manufacturer:GE Boards&Turbine Control

Series:Mark V DS200

Product Description

The DS200CPCAG1ABB GE contactor guide plate provides guidance and support for the installation of GE contactors.Ensure the correct position of the contactor in the electrical cabinet or equipment.

feature

Accurate size design ensures perfect fit with GE contactors.

Made of high-strength materials with good mechanical strength.

Surface treatment process to improve the corrosion resistance of the product.

Easy to install and saves maintenance time.

DS200CPCAG1ABB GE contactor guide plate is an auxiliary installation component designed by ABB specifically for the GE series contactors.

The General Electric contactor lead board DS200cpcag1abb has one 12 pin connector and two 2-pin connectors.It also has four terminal blocks to connect up to 12 signal lines.The General Electric contactor driver board DS200cpcag1abb is also equipped with a 24VDC15A socket power relay.

There are moving parts inside the relay,so careful consideration is needed when installing the board in the driver.If the relay collides with the metal structure or other components inside the drive cabinet,it is easy to be damaged.A relay is a board with a high and protruding surface,making it easy to hit.When you slide the board onto the drive cabinet,make sure you have a good view of the board and the interior of the cabinet.Slowly insert the board and align it with the screws on the bracket.Insert the screw into the hole with one hand and use the other hand to turn the screwdriver to secure the screw.However,do not damage the board by fixing it too tightly,as screws may crack the board.Use washers if they are supplied or used on defective boards.

Then,open the screw on the terminal block and insert the wire into the appropriate terminal.Insert the wire into the terminal with one hand and tighten the terminal screw with the other hand.Grasp the cable through the connector and insert it into the appropriate connector.Gently press them into the connector to ensure they are fully secured.

application area

DS200CPCAG1ABB GE contactor guide plate is suitable for industrial electrical control systems,guiding and fixing GE series contactors.

    Reviews

    There are no reviews yet.

    Be the first to review “DS200CPCAG1ABB GE contactor guide plate”
    Review now to get coupon!

    Your email address will not be published. Required fields are marked *

    Back to Top

    Search For Products

    Product has been added to your cart