CB6687-2L BENTLY

Bently Nevada Product – CB6687-2L – Product Parameters and Product Specification

Product Parameters:

The CB6687-2L from Bently Nevada is typically a vibration transducer or accelerometer, designed for use in monitoring rotating machinery such as turbines, generators, and pumps. The product parameters for this device are crucial for understanding its operation and compatibility with monitoring systems. Here are some common parameters:

Sensitivity: The transducer’s ability to convert physical vibration into an electrical signal, measured in units such as mV/g (millivolts per gram).

Frequency Range: The range of frequencies the transducer can detect, typically specified in hertz (Hz).

Dynamic Range: The range of vibration amplitudes the transducer can measure without distortion.

Natural Frequency: The frequency at which the transducer resonates, which affects its sensitivity and frequency response.

Output Signal: The type of electrical signal produced by the transducer, such as voltage or charge.

Power Requirements: The voltage and current needed to operate the transducer.

Connector Type: The type of connector used to interface with monitoring equipment, such as an IEPE (IEEE 1451.4) connector.

Temperature Range: The operating temperature limits of the transducer.

Weight and Dimensions: Physical specifications important for installation and compatibility.

Compliance and Certifications: Safety certifications or compliance with industry standards such as ATEX or IEC.

Product Specification:

The product specification for the CB6687-2L provides detailed technical information about the transducer’s design, performance, and application. It typically includes:

Technical drawings and diagrams showing the transducer’s dimensions, mounting configurations, and wiring details.
Complete electrical characteristics, including sensitivity, frequency response, and impedance.
Environmental ratings specifying temperature, humidity, and vibration resistance.
Recommended installation procedures, including mounting locations and orientation.
Performance metrics such as nonlinearity, hysteresis, and temperature drift.
Compliance information, including any safety certifications or industry standards met.

For specific and detailed information about the Bently Nevada CB6687-2L product parameters and specifications, it is recommended to refer to the official documentation provided by Bently Nevada or contact their customer service for assistance.

CB6687-2L BENTLY

CB6687-2L BENTLY

CB6687-2L BENTLY