News

A-B 1746-NI16I is an analog input module.Here is a detailed introduction to it:

1.Product Overview

A-B 1746-NI16I belongs to the product line of A-B(Rockwell Automation)and is an analog input module.Its main function is to convert external analog signals into digital signals for communication and processing with PLC(Programmable Logic Controller)or other automation equipment.

2.Technical Specifications

Number of channels:The module has 16 analog input channels and can read and process multiple analog signals at the same time.

Signal type:Supports many different types of analog signal inputs,including voltage signals,current signals,and resistance signals,suitable for a variety of different application scenarios.

Resolution:With 16-bit resolution,it can provide accurate analog signal conversion.

A-B 1746-NI16I

Sampling rate:The sampling rate is high,which can quickly and accurately capture the changes of input signals.

Communication interface:Use standard PLC communication interfaces(such as RS-232 or RS-485)to exchange data with PLC or other controllers.

3.Electrical characteristics

Voltage category:Voltage category of-20 to 20mA.

Backplane current:125mA at 5V,75mA at 24V.

Backplane power consumption:2.425W maximum(625.5W at 0V DC,8.24W at 1V DC).

Common-mode voltage range:±10.25V relative to analog common terminal.

Input impedance:249 ohms.

Maximum voltage input between analog common and any input terminal:±8V.

Maximum current input:±30mA.

IV.Environmental parameters

Relative humidity:5%to 95%,non-condensing.

Operating temperature range:-25 to 60 degrees Celsius(-13 to 140 degrees Fahrenheit).

Non-operating temperature range:-40 to 85 degrees Celsius(-40 to 185 degrees Fahrenheit).

V.Physical characteristics

Heat dissipation:2.43W.

AIFM connector:25-pin D shell.

Installation:When installing the module in the chassis,there is no need to remove the terminal block from the module.But if you remove the terminal block,use the label next to the terminal block to identify the location and type of the module.

dav

A-B 1746-NI16I

VI.Application Scenario

A-B 1746-NI16I analog input module is mainly used to connect analog process variables to measure their amplitude,and is often used for monitoring or as a feedback signal for closed-loop control systems.It can achieve manual or automatic control by using the usual proportional integral derivative(PID)algorithm control method.Without this feedback signal,automatic control cannot be fully achieved.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

HONEYWELL FC-SAI-1620M is a safe high-density analog input module.The following is a detailed introduction to the product:

1.Product Overview

The FC-SAI-1620M module is part of the Honeywell Safety Manager™system and is designed for critical control applications.The module has 16 analog input channels and can be used to connect various sensors and actuators to achieve precise monitoring and control of industrial processes.

2.Main Features

Highly reliable:

It uses high-quality materials and manufacturing processes,with extremely high reliability and stability.

It can operate for a long time in harsh industrial environments and has dustproof,waterproof,shockproof and other characteristics.

Fast response:

It has fast signal processing capabilities and response time,and can monitor and control various industrial processes and machines in real time.

It helps to ensure the continuity and efficiency of factory production and reduce downtime and failure rate.

HONEYWELL FC-SAI-1620M

Flexibility and scalability:

It has flexible configuration and expansion capabilities,and can be customized and expanded according to different application requirements.

It can be used with various sensors and actuators to achieve diversified control and monitoring functions.

Easy to use and maintain:

With a user-friendly interface and easy-to-use tools,it is convenient for users to configure,manage and maintain.

Support remote monitoring and control,users can remotely access and control through the network,reducing the frequency and cost of on-site maintenance.

Security:

With high security,it can effectively protect factory equipment and production processes from various threats.

Support a variety of security protocols and technologies,such as encrypted communication,access control,fault detection,etc.,to ensure the safety and stability of factory operation.

III.Technical specifications

Number of channels:16 analog input channels.

Input signal:0(4)-20mA.

Power supply:24VDC.

Mounting method:card holder installation.

Dimensions:10.2×7.6×1.2 inches(about 259×193×30.5 mm).

Weight:1.2 pounds(about 0.54 kg).

HONEYWELL FC-SAI-1620M

IV.Application fields

FC-SAI-1620M module is suitable for various application scenarios that require high-precision analog input,such as industrial automation control systems in industries such as petroleum,chemical,electric power,and metallurgy.It can be seamlessly integrated with Honeywell’s Safety Manager™system to achieve efficient,safe and reliable industrial process control

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

A-B 1747-L541 is a programmable logic controller(PLC)input/output(I/O)module produced by Allen-Bradley(A-B for short).Allen-Bradley is a well-known brand under Rockwell Automation,focusing on industrial automation and digital transformation solutions.

1.Product Overview

The 1747-L541 module is a component in the Allen-Bradley PLC system and is usually used to expand the input/output capabilities of the PLC.This module is designed to operate stably in harsh industrial environments and has high reliability and durability.

2.Main Features

Input/output type:The 1747-L541 module usually has digital input and/or digital output functions for connecting external devices such as sensors and actuators.

High-speed processing:The module supports high-speed data processing and transmission,and can meet the real-time requirements of modern industrial automation systems.

High reliability:The use of high-quality materials and advanced manufacturing processes ensures stable operation even in harsh industrial environments.

Easy to configure and maintain:The module parameters can be easily configured through the programming software,and the module design is easy to install and maintain.

Compatibility:It has good compatibility with other PLC modules and systems of Allen-Bradley,which is convenient for integration and expansion.

A-B 1747-L541

III.Technical specifications

Since different models and versions of 1747-L541 modules may have different technical specifications,the following are some common specifications(specific parameters may vary depending on the model):

Input voltage:It usually supports standard industrial voltage ranges,such as 24VDC,etc.

Number of input/output points:Depending on the specific model,there may be different numbers of input and/or output points.

Isolation method:Technologies such as optoelectronic isolation or transformer isolation may be used to improve the module’s anti-interference ability.

Communication interface:Communicate with the PLC master control unit through the backplane bus or expansion bus.

Operating temperature:It usually supports a wide operating temperature range to adapt to different industrial environments.

A-B 1747-L541

IV.Application field

The 1747-L541 module is widely used in various industrial automation systems,such as manufacturing,energy,transportation,water treatment and other fields.They are generally used to connect and control various external devices such as sensors,actuators,indicator lights,etc.to achieve automated production,monitoring and control functions.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

TRICONEX 3101 is a main processor module in the Triconex series control system.The following is a summary of its detailed information:

1.Product Overview

TRICONEX 3101 is a high-performance processor module designed for industrial automation and safety control.As the core component of the Triconex control system,it provides high reliability and high redundancy functions to ensure that the system can continue to operate stably and safely when some modules fail.

2.Main Features

Triple Redundancy(TMR)Structure:

TRICONEX 3101 adopts a triple redundant design,which means that there are three independent processor channels running simultaneously in the system,and the failure of any channel will not affect the operation of the entire system.

Real-time processing capability:

The module supports high-speed,real-time data processing and decision-making,and can respond quickly to various complex control tasks.

High security:

TRICONEX 3101 complies with the SIL3 safety standard and is suitable for critical applications requiring high security.

TRICONEX 3101

Powerful computing power:

The module can process large amounts of input and output data and support complex control and decision logic.

Multiple communication interfaces:

TRICONEX 3101 supports multiple communication protocols,such as Modbus,Ethernet,etc.,and can be seamlessly integrated with other control systems or devices.

Easy to expand and integrate:

The module supports flexible configuration and modular design,which is convenient for users to expand and integrate according to actual needs.

III.Application fields

TRICONEX 3101 is widely used in industrial fields such as oil,gas,chemical,and electric power to provide reliable automation control and monitoring.In these fields,the module is used to perform tasks such as control logic,monitoring industrial processes,data acquisition and communication to ensure the reliability and safety of industrial processes.

TRICONEX 3101

IV.Technical specifications(examples)

Please note that the specific technical specifications may change due to product versions and manufacturer updates.The following are some possible technical specification examples:

Processor type:high-performance embedded processor

Memory:ROM,RAM and EEPROM to ensure data storage and system stability

Communication interface:Ethernet,Modbus,etc.

Operating temperature range:-20°C to 60°C(the specific range may vary depending on the product)

Operating humidity range:5%to 95%(no condensation)

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500/25 is an enhanced keyphase module developed by Bently Nevada.The following is a detailed introduction to the product:

I.Product Overview

BENTLY 3500/25 is a half-height,dual-channel module that is mainly used to transmit keyphase signals to the monitor module in the 3500 rack.When the keyphaser mark on the shaft is aligned with the keyphaser sensor,the module uses a magnetic sensor or proximity probe to detect the alignment and converts the input signal into a digital keyphaser signal.

II.Main Features

Dual-channel design:BENTLY 3500/25 has two input channels that can receive keyphase signals from two different sensors,improving the reliability and flexibility of the system.

Digital signal conversion:The module is able to convert the received analog keyphaser signal into a digital signal for subsequent processing and monitoring.

High-precision timing measurement:With one or more event pulses(keyphasor signals)per revolution of a rotating shaft or gear,the BENTLY 3500/25 is able to provide precise timing measurements,enabling accurate monitoring of shaft speed and vector characteristics.

Backward compatibility:The module provides higher Keyphasor signal processing capabilities than previous designs while maintaining full backward compatibility with existing Keyphasor modules for legacy systems in terms of form,fit,and function.

BENTLY 3500/25

Multiple configuration options:Users can choose different configuration options such as isolated I/O modules and non-isolated I/O modules according to actual needs.The isolated I/O module is suitable for occasions that require isolation from other systems(such as control systems).

III.Technical specifications

Input signal range:

The input signal range of the non-isolated I/O module is+0.8V to 21.0V.

The input signal range of the isolated I/O module is+5V to-11V.

Signals outside this range are internally limited by the module.

Output impedance:The maximum output impedance of the buffer is 504 ohms.

Power Requirements:The power supply for the KeyPhase sensor is-24Vdc,40mA maximum per channel.

Mounting Requirements:In order to be installed in a full-height slot,the half-height main module requires a unique mounting adapter.Users can insert the main module into any of the 14 accessible slots.There can be only two main modules in each rack,one each in the top and bottom half slots.

Operating Temperature:

-30 degrees Celsius to+65 degrees Celsius(when used with the non-internal barrier version of the KeyPhase I/O module).

0 degrees Celsius to+65 degrees Celsius(when used with the KeyPhase internal barrier I/O module(internal termination)).

Storage Temperature:-40 degrees Celsius to+85 degrees Celsius.

Humidity:95%,non-condensing.

BENTLY 3500/25

IV.Application Fields

BENTLY 3500/25 is widely used in various industrial monitoring and control systems,especially in situations where accurate measurement of shaft speed and vector characteristics is required.For example,it can be used for vibration monitoring,position monitoring,and speed control of rotating machinery.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

GE IC698ETM001 is an Ethernet interface module produced by General Electric(GE).The following is a summary of its detailed information:

I.Product Overview

GE IC698ETM001 belongs to GE’s IC698 series and is an Ethernet interface module designed for industrial automation and embedded applications.The module is based on high-performance Ethernet technology,supports high-speed data transmission and real-time communication,and can meet various complex control and data processing needs.

II.Main Features

High-performance Ethernet communication:

The IC698ETM001 module has two Ethernet communication ports,supports high-speed data transmission and real-time communication,and ensures the accuracy and timeliness of data.

Electrical isolation function:

The module provides an isolation voltage of 1500 VAC,which effectively protects the equipment from electrical interference and damage,and improves the stability and safety of the system.

Optimized design:

The optimized design of IC698ETM001 enables it to operate stably in harsh industrial environments,reduce failure rates,and improve system reliability and durability.

GE IC698ETM001

Multiple operating system support:

The module supports a variety of different operating systems and development environments,which is convenient for users to configure and expand according to actual application needs.

Modular design:

GE IC698ETM001 has a modular design,allowing users to add or change modules according to the needs of the application,which improves the flexibility and scalability of the system.

Aluminum alloy shell:

The shell of the module is made of aluminum alloy,which has good durability and protection performance,and can withstand the impact of harsh industrial environments on the equipment.

GE IC698ETM001

III.Application fields

GE IC698ETM001 is widely used in various industrial automation and control applications,including but not limited to the following fields:

Manufacturing:

In the manufacturing industry,the module can be used to monitor and control production lines,machines and automated workstations to improve production efficiency and quality.

Process control:

In process control fields such as chemical,petroleum,food and beverage processing,IC698ETM001 can be used to monitor and control industrial processes to ensure product quality and work safety.

Power industry:

In the power industry,the module can be used to monitor and control power distribution,power generation and substation equipment to improve the stability and safety of the power system.

Building automation:

In building management systems,IC698ETM001 can be used to control lighting,HVAC,security systems and other equipment to improve the energy efficiency and comfort of buildings.

Water treatment:

In water treatment plants and wastewater treatment plants,the module can be used to monitor and control the treatment process to ensure water quality and environmental compliance.

Traffic control:

In traffic control systems,IC698ETM001 can be used to monitor and control traffic lights,railway signals,and tunnel safety equipment to improve the safety and efficiency of transportation systems.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500/33 149986-01 is a powerful industrial automation equipment component,commonly used in industrial automation control systems,especially those occasions that require accurate speed monitoring and control of mechanical equipment.The following is a detailed introduction to the product:

1.Product Overview

BENTLY 3500/33 149986-01 is a speed monitor or relay output module under the Bently Nevada brand.It is usually used in conjunction with the Bently Nevada 3500 monitoring system to monitor and control key parameters such as rotation speed and vibration of mechanical equipment.

2.Main Features

High-precision measurement:BENTLY 3500/33 149986-01 can accurately measure the rotation speed of the equipment and provide real-time and accurate data support for the control system.

Real-time monitoring:The monitor can monitor the operating status of the equipment in real time,capture speed changes and abnormal vibrations in time,and help prevent equipment failures and reduce production risks.

Good compatibility:This speed monitor is usually compatible with a variety of control systems and sensors,and can be easily integrated into existing industrial automation systems.

Multiple output modes:As a relay output module,BENTLY 3500/33 149986-01 supports multiple output modes,such as normally open,normally closed,pulse,etc.,to meet the control needs of different equipment.

Remote monitoring and control:Some systems may support remote monitoring and control functions,enabling operators to monitor equipment status and take necessary actions through remote access.

Stability and reliability:The module has strong electromagnetic compatibility,can work stably under harsh environmental conditions,and has overcurrent protection function,which can protect external devices and the module itself from overcurrent damage.

BENTLY 3500/33 149986-01

III.Application fields

BENTLY 3500/33 149986-01 is widely used in various industrial fields,such as power plants,petrochemical plants,metallurgical plants,etc.,to monitor and control key parameters of mechanical equipment,such as rotation speed,vibration,etc.It is often used for speed monitoring and vibration monitoring of key rotating equipment(such as generators,pumps,compressors,etc.)to prevent equipment failures and extend equipment life.

4.Technical specifications

Size:about 220mm x 125mm x 25mm

Weight:about 1kg

Number of channels:16(when used as a relay output module)

Power requirements:Depends on the specific application scenario and configuration

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500/92 136180-01 is a communication gateway module produced by Bently Nevada.The following is a detailed introduction to it:

1.Product Overview

The BENTLY 3500/92 136180-01 communication gateway module is an important part of Bently Nevada’s 3500 series monitoring system.It provides extensive serial(RS232/RS422/RS485)and Ethernet TCP/IP communication capabilities for integrating the monitoring values​​and status of all racks with process control and other automation systems.

2.Main functions

Communication capabilities:Supports Modicon Modbus protocol(via serial communication),Modbus/TCP protocol(serial Modbus variant for TCP/IP Ethernet communication),and proprietary Bently Nevada protocol(for communication with 3500 frame configuration and data acquisition software packages).

Data integration:Ability to integrate the monitoring values​​and status of all racks into process control and other automation systems to achieve unified data management and analysis.

Configurability:Has a configurable Modbus register utility that provides the same functionality as the main value handling.

BENTLY 3500/92 136180-01

III.Technical Specifications

Power consumption:Typical value is 5.0 watts(for Modbus RS232/RS422 I/O modules),or 5.6 watts(for Modbus RS485 I/O modules).

Dimensions:241 mm high,24.4 mm wide,242 mm deep.

Interface type:Ethernet connection is RJ45 connection for 10BASE-T star configuration Ethernet.

Operating temperature:-30 to+65 degrees Celsius(main module and I/O module).

Storage temperature:-40 to+85 degrees Celsius.

Humidity:95%,non-condensing.

4.Application Fields

BENTLY 3500/92 136180-01 communication gateway module is widely used in various industrial fields that require vibration monitoring and mechanical health management,such as the energy industry(power plants,nuclear power plants,oil and gas facilities,etc.),industrial automation systems,and monitoring and protection of large and medium-sized rotating machinery(such as turbines,generators,compressors,etc.).

BENTLY 3500/92 136180-01

5.Product Advantages

Highly integrated:The monitoring data and status of multiple racks can be integrated into a single communication gateway,simplifying system integration and data management.

Flexible configuration:Supports multiple communication protocols and configurable Modbus register utilities to meet different communication needs of users.

High reliability:The use of high-quality materials and advanced manufacturing processes ensures the stability and reliability of the product.

Easy maintenance:The modular design makes maintenance and replacement more convenient and quick.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

A-B 842E-CM-MIP3BA is a high-performance encoder.Here is a detailed introduction to it:

1.Product Overview

The A-B 842E-CM-MIP3BA encoder belongs to the 842 series multi-turn encoder of the A-B(Allen-Bradley)brand,and is also an Ethernet/IP encoder.It uses absolute encoding technology to convert rotary motion into digital signals and provides isolation functions to improve measurement accuracy and safety.

2.Main features

Ultra-high resolution:The A-B 842E-CM-MIP3BA encoder provides 18-bit single-turn resolution and 30-bit(or 26-bit,depending on the description)multi-turn resolution to meet the needs of high-precision measurement.

EtherNet/IP interface:The encoder has an EtherNet/IP interface and uses Ethernet to communicate with a PLC or programmable logic controller.At the same time,it also has an embedded EtherNet/IP switch,which can connect additional E/IP-enabled products in series and supports device-level ring(DLR)to achieve Ethernet media redundancy.

A-B 842E-CM-MIP3BA

High precision and high reliability:The encoder is designed to achieve high performance and high reliability in harsh industrial environments.It has EtherNet/IP function with IEEE 1588 precision clock synchronization,as well as hardware/software IP address settings.

Multiple output modes:The A-B 842E-CM-MIP3BA encoder supports multiple output modes,such as SSI,RS422,CANopen,etc.,which is convenient for users to choose according to actual needs.

High protection level:The encoder has a protection level of up to IP67,has good impact resistance and vibration resistance,and can operate stably in harsh environments.

3.Application fields

The A-B 842E-CM-MIP3BA encoder is widely used in industrial control,robotics,textiles,packaging,printing and other fields,providing accurate rotation angle information for various mechanical equipment,helping users to achieve accurate control and monitoring of equipment.

A-B 842E-CM-MIP3BA

4.Product Specifications

Here are some product specifications for the A-B 842E-CM-MIP3BA encoder(specific parameters may vary depending on product batches and configurations):

Dimensions:122mm x 122mm x 50mm

Shaft diameter:10mm

Resolution:26 bits(or 18 bits single turn,30 bits multi turn)

Accuracy:±0.01°(or±0.03°,depending on different descriptions)

Speed:3000 RPM(or maximum 9000 RPM,depending on shaft type)

Voltage range:10~30VDC

Operating temperature:-40℃+85℃(or-30℃+85℃,depending on different descriptions)

Material:Metal(housing material is aluminum,shaft material is stainless steel)

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

HIMA F7553 is a core control component designed for industrial automation applications launched by HIMA.The following is a summary of its detailed information:

1.Product Overview

HIMA F7553 is a central processing unit module or programmable logic controller(PLC)module suitable for various industrial automation scenarios.Its highly integrated and modular design enables the module to be flexibly configured according to different application requirements,thereby meeting various complex industrial automation requirements.

2.Main Features

Highly integrated and modular:

HIMA F7553 module adopts a highly integrated and modular design,which is convenient for users to flexibly configure according to actual needs.

This design not only improves the flexibility of the system,but also reduces the maintenance and upgrade costs of the system.

Powerful data processing capabilities:

The module uses a high-performance ARM microcontroller as the core processor and has excellent data processing capabilities.

It can quickly and accurately process data from various sensors and actuators to ensure the real-time and accuracy of the system.

HIMA F7553

Multiple communication interfaces:

HIMA F7553 module supports multiple communication interfaces,such as PROFIBUS,PROFINET,etc.,which is convenient for data exchange and communication with other devices or control systems.

This communication capability enables the module to easily achieve real-time information sharing and collaborative work.

Excellent stability and reliability:

The module uses high-quality materials and advanced manufacturing processes to ensure long-term stable operation in harsh industrial environments.

At the same time,HIMA F7553 also has a variety of protection functions,such as overvoltage protection,overcurrent protection and short-circuit protection,which further improves the safety and reliability of the system.

Programmability:

Users can program and configure the HIMA F7553 module according to actual needs to achieve personalized control logic and algorithms.

This programmability enables the module to adapt to various control requirements and meet the application needs of different industries.

Good compatibility and scalability:

The HIMA F7553 module has good compatibility with a variety of mainstream industrial automation systems and software platforms,which is convenient for users to carry out system integration and data sharing.

At the same time,the module also supports a variety of expansion modules and accessories,which can be expanded and upgraded as needed to meet the future development needs of the system.

HIMA F7553

III.Application field

The HIMA F7553 module is widely used in automation systems in industries such as petroleum,chemical,natural gas,energy,and transportation.In these areas,the module is responsible for realizing data communication and exchange between different devices,modules and systems,ensuring the safe,reliable and efficient operation of the entire process.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl