News

A-B 1756-RM2 is a ControlLogix redundancy module produced by Allen-Bradley(Rockwell).The following is a detailed introduction to the module:

1.Product Overview

The A-B 1756-RM2 redundancy module enables controller redundancy by pairing with another 1756-RM2 from another ControlLogix chassis.It supports synchronization speeds up to 1000 Mbps and controller switching of 20 ms,providing powerful network support and data redundancy functions for industrial automation applications.

A-B 1756-RM2

2.Technical Features

High-speed performance:

The A-B 1756-RM2 has a synchronization speed of up to 1000 Mbps,which can meet the needs of industrial automation applications for high-speed data transmission.

Redundancy function:

The module supports controller redundancy by pairing with another 1756-RM2 to ensure that the system can still operate normally when a single controller fails.

Provides a controller switching time of 20 ms to reduce system downtime caused by failures.

Compatibility:

A-B 1756-RM2 is compatible with ControlLogix controllers 5560 and 5570,which is convenient for users to integrate and upgrade the system.

Communication capabilities:

Support up to seven enhanced ControlNet and EtherNet/IP communication modules to meet various network communication needs.

Cross-loading with redundant fiber ports without single point failure ensures the reliability and stability of communication.

Power consumption and heat dissipation:

Consume 1.16 A current at 5.1V DC and 3.4 mA current at 24V DC.

The maximum power consumption is 6W and the heat dissipation is 21 BTU/hr.

Installation and configuration:

It can be installed in any slot of the ControlLogix chassis,which is convenient for users to install and configure.

Use the redundant module configuration tool RSLinx 2.59 for configuration and management.

A-B 1756-RM2

III.Application field

A-B 1756-RM2 redundant modules are widely used in various industrial automation systems that require high reliability and redundant control,such as:

Manufacturing:used for automatic control on production lines to improve production efficiency and product quality.

Oil and gas industry:used for automated control in oil and gas extraction,processing and transportation to ensure the stability and safety of the production process.

Chemical industry:used for automated control of chemical reaction processes to optimize production processes and product quality.

Power industry:used for monitoring and control of power systems to ensure the stability and safety of power supply

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ICS TRIPLEX T9110 is a high-performance,high-reliability industrial control module.The following is a detailed introduction to ICS TRIPLEX T9110:

1.Product Overview

ICS TRIPLEX T9110 advanced processor module is designed for industrial automation systems and belongs to the category of high-performance programmable logic controller(PLC)modules.It adopts the latest Intel chipset technology(such as 815E chipset)and integrates a variety of advanced technologies to meet the needs of complex industrial applications.

ICS TRIPLEX T9110

2.Technical Features

High-performance processor:

Equipped with a high-performance processor,it can quickly and accurately process various industrial control algorithms and real-time data.

Meet the needs of various industrial applications for high-performance control.

Scalability:

Supports a variety of expansion cards and peripherals,such as hard drives,graphics cards,network cards,etc.

It is convenient for users to customize and expand according to specific application requirements,and improve the flexibility and maintainability of the system.

High reliability:

Adopt high-reliability design and manufacturing processes to ensure stable operation in harsh industrial environments.

It has a long service life and reduces downtime caused by failures.

Fault tolerance:

Supports fault-tolerant processing,including redundant memory,dual-core processors,etc.

Improve system reliability and stability to ensure normal operation in the event of a fault.

Multiple communication interfaces:

Supports multiple communication protocols and interfaces,such as EtherNet/IP,Profinet,Modbus,etc.

Conveniently connect and communicate with various industrial equipment and systems to achieve real-time data transmission and sharing.

Human-machine interface(HMI):

Supports ICS’s iFIX software to achieve visual monitoring and operation.

Improve production efficiency and equipment operation safety,reduce operation difficulty and risk of misoperation.

ICS TRIPLEX T9110

III.Application scenarios

ICS TRIPLEX T9110 is suitable for a wide range of applications,including but not limited to:

Manufacturing:used for automated control on production lines to improve production efficiency and product quality.

Power industry:used for monitoring and control of power systems to ensure the stability and safety of power supply.

Energy management:used for automated control in energy production and distribution processes to optimize energy utilization efficiency.

Any industry that requires a high-reliability control system:such as oil and gas,chemical industry,metallurgy,etc.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

FOXBORO FBM232 P0926GW is an automation control module of Foxboro.It may have various functions and features.The following is a detailed introduction to FOXBORO FBM232 P0926GW:

1.Product Overview

FOXBORO FBM232 P0926GW is usually used in industrial automation systems as a key component for monitoring and controlling industrial processes.It may have multiple features such as digital input/output,communication interface,real-time monitoring and feedback,programmable logic,and alarm functions to meet the needs of different applications.

FOXBORO FBM232 P0926GW

2.Main functions and features

Digital input/output:

FBM232 P0926GW modules are usually equipped with multiple digital input channels for receiving inputs from sensors,switches or other digital signal sources.These input channels can be used to monitor various process parameters such as temperature,pressure,liquid level,etc.

At the same time,the module also has digital output channels for sending output signals to actuators,valves or other digital signal drive devices.These output channels can be used to control or adjust various process operations,such as switching devices,regulating valves,etc.

High-precision signal processing:

The FBM232 P0926GW module usually has high-precision signal processing capabilities to ensure accurate acquisition and transmission of input and output signals,thereby improving the overall performance and reliability of the system.

Communication interface:

The module is usually equipped with a communication interface to communicate with other devices,control systems or monitoring software.These interfaces may support standard communication protocols such as Modbus,Profibus,etc.to achieve networking and centralized control of field devices.

Real-time monitoring and feedback:

The FBM232 P0926GW module provides real-time monitoring functions,allowing operators to view the status of digital input/output channels at any time and take measures as needed.This helps to discover and solve problems in a timely manner and ensure the stability and safety of the production process.

Programmable logic:

The module usually supports programmable logic,allowing users to define and configure logical functions according to actual needs.For example,output actions can be triggered or control strategies can be implemented based on the status of input signals to meet the needs of different applications.

Alarm function:

The FBM232 P0926GW module may have an alarm function that triggers an alarm when specific conditions are met to notify operators or take automatic control measures.This helps to timely discover and respond to potential safety hazards and ensure the safe operation of the system.

FOXBORO FBM232 P0926GW

3.Application Fields

FOXBORO FBM232 P0926GW module is widely used in various industrial automation fields,including but not limited to:

Manufacturing:such as automobile manufacturing,machinery manufacturing,etc.,used to control various equipment and processes on the production line.

Process industry:such as chemical,petroleum,pharmaceutical,etc.,used to monitor and control various parameters and equipment in the production process.

Energy:such as electricity,hydropower,etc.,used for automation control of power generation,transmission and distribution systems.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB RFO810 is a module produced by ABB,which may be part of a PLC(Programmable Logic Controller)system or related automation control system.The following is a detailed introduction to ABB RFO810:

1.Product Overview

ABB RFO810 module is a key component in ABB’s automation product line.It may be used in various industrial automation occasions,such as manufacturing,process industry,energy,etc.The module is designed to improve the flexibility,reliability and performance of the system to meet the needs of different applications.

ABB RFO810

2.Main Features

High Quality and Reliability:

As a well-known brand product of ABB,the RFO810 module has high quality and reliability,which can ensure stable operation in various harsh environments.

Modular Design:

The RFO810 module adopts a modular design,which can be easily combined and expanded with other ABB modules to meet different application requirements.

High Performance:

The module has a high-performance processor and memory,which can quickly process large amounts of data and support complex control algorithms.

Communication Capability:

The RFO810 module supports a variety of communication protocols and interfaces,such as Ethernet,serial communication,etc.,which can easily exchange data with other devices and systems.

Easy to configure and maintain:

Intuitive configuration software and diagnostic tools are provided,allowing users to easily configure and maintain the module,reducing operating and maintenance costs.

ABB RFO810

3.Application areas

ABB RFO810 modules are widely used in various industrial automation fields,including but not limited to:

Manufacturing:such as automobile manufacturing,machinery manufacturing,etc.,used to control various equipment and processes on the production line.

Process industries:such as chemical,petroleum,pharmaceutical,etc.,used to monitor and control various parameters in the production process.

Energy:such as electricity,hydropower,etc.,used for automation control of power generation,transmission and distribution systems.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

HONEYWELL 05701-A-0361 is a feature-rich industrial automation component.Here is a detailed introduction to the product:

I.Product Overview

HONEYWELL 05701-A-0361 is an industrial automation module produced by Honeywell.It can be used as a flame detection sensing module or a discrete input/output module.The module has high reliability,stability and safety,and is suitable for a variety of harsh industrial environments.

HONEYWELL 05701-A-0361

II.Product Features

Flame detection sensing module features:

Flame detection:Ability to detect visible light,infrared or ultraviolet radiation to identify the presence of flames.

Thermal radiation detection:Some modules can also detect thermal radiation to sound an alarm when the fire source is not yet clearly visible.

Fast response:Ability to respond to flames quickly to reduce the time it takes for a fire to spread.

Reliability:Designed with high reliability to ensure accurate flame detection.

Durability:With waterproof,dustproof and high temperature resistance,it is suitable for harsh environments.

Discrete input/output module features:

Discrete input/output:can receive and send discrete signals,such as switch status,sensor detection,etc.,suitable for various discrete input and output application scenarios.

Programmability:can be configured and controlled by programming to adapt to different control system and equipment requirements.

Multiple interfaces:supports multiple communication interfaces,such as RS-485,RS-232,CAN,etc.,which is convenient for connection with other devices or systems.

High reliability:has high reliability and stability,and can work stably in harsh industrial environments.

Safety:has safety protection function,which can prevent accidents and equipment damage.

HONEYWELL 05701-A-0361

III.Application field

Flame detection sensor module application:

Commonly used in flame detection and safety systems in industrial and commercial environments,such as chemical,oil and gas,electricity,manufacturing and other fields to provide fire detection and protection.

Discrete input/output module application:

Widely used in industrial automation systems,used with control systems such as PLC(programmable logic controller)or DCS(distributed control system)to monitor and control discrete signals,such as switch status,sensor status,etc.on production lines.At the same time,it is also suitable for building automation,energy management,environmental monitoring and manufacturing process control.

4.Technical Parameters

Here are some possible technical parameters(specific parameters may vary depending on product batches and configurations):

Working voltage:may include loop voltage(such as 12-30V)and other working voltages(such as 360V,for specific application scenarios).

Output frequency:20kHz(for certain application scenarios).

Alarm type:red light(as an indication of fault or abnormal status).

Working environment temperature:-40°C to 100°C(specific range may vary depending on the product).

Applicable motor:servo motor(for specific application scenarios).

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

LAM 810-073479-215 is an interface board module.The following is a detailed introduction to the module:

1.Product Overview

The LAM 810-073479-215 interface board module is responsible for the control plane of the entire system and is suitable for industrial automation,control systems and equipment.It is well designed and has stable performance,and can meet the needs of various complex industrial environments.

2.Main features

Brand and model:

Brand:LAM

Model:810-073479-215

Technical specifications:

Material code:810-073479-215

Working voltage:850V(another saying is 50~60V,which needs to be determined according to actual application)

Output frequency:58kHz

LAM 810-073479-215

Number of interfaces:4

Number of I/O points:40 points(may not be mentioned in some descriptions)

Scope of use:Industrial

Analog output range:-40~100(specific units may vary depending on application(depending on the model)

Applicable motor:servo motor

Power consumption:5.3W

Module format:standard

System function:normal

System environment:powerful

System capability:strong

Color:green

Installation method:rail installation

Program capacity:2048

Category:analog expansion module

Structural form:fixed

Firmware version:V4.1.0(the specific version may vary depending on the production batch)

Other features:

This module has powerful system capabilities and a wide range of uses,and is suitable for various industrial automation and control system applications.

Its design meets the manufacturer’s standards,with reliable quality and stable performance.

The module supports PLC operating system and has powerful system environment and control capabilities.

It provides multiple interfaces for easy connection and data exchange with other devices.

LAM 810-073479-215

III.Application field

LAM 810-073479-215 interface board module is widely used in industrial automation,control systems,mechanical equipment,electric power,chemical industry and other fields.It can realize data exchange and communication between devices,improve the reliability and stability of the system,and provide strong guarantee for the normal operation of industrial automation and control systems.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500/53  is an electronic overspeed detection system designed for the 3500 series mechanical detection system.The following is a detailed introduction to BENTLY 3500/53:

I.Product Overview

The BENTLY 3500/53 electronic overspeed detection system provides a high reliability,fast response and redundant tachometer system,which is ideal for overspeed protection systems.It complies with the American Petroleum Institute’s standards for overspeed protection,such as API 670 and 612,ensuring that alarm signals can be issued quickly and accurately when the machinery is overspeeding,thereby protecting the equipment from damage.

II.Technical Features

Signal Input:

Each overspeed detection module can accept a single sensor signal from a proximity probe sensor or a magnetic pickup.

The input signal range is+10.0V to-24.0V,and signals outside this range are limited within the module.

Sensor Support:

Supports a variety of sensor types including Bently Nevada 3300 8mm Proximitor,16mm HTPS,7200 5mm,8mm,11mm and 14mm Proximitor,and 3300 RAM Proximitor or magnetic pickup.

LED Indicators:

OK LED:Indicates if the 3500/53 module is operating properly.

TX/XR LED:Indicates that the 3500/53 module is communicating with other modules on the 3500 rack.

BENTLY 3500/53

Bypass LED:Indicates that the 3500/53 module is in bypass mode.

Test Mode LED:Indicates that the 3500/53 module is in test mode.

Alarm LED:Indicates that the associated relay is in alarm.

Power Consumption and Output:

Power consumption is typically 8.0W.

Output impedance is 550Ω.

Sensor power supply is 24V DC,40mA maximum.

Recorder and Voltage Compliance:

The recorder output is+4 to+20mA,proportional to the module full scale range(rpm).

For voltage compliance,the voltage range on the load is 0 to+12Vdc,and the load resistance is 0 to 600Ω.

Environmental Compatibility:

The operating temperature range is-30°C to+65°C(-22°F to+149°F).

The storage temperature range is-40°C to+85°C(-40°F to+185°F).

BENTLY 3500/53

3.Application Field

BENTLY 3500/53 electronic overspeed detection system is widely used in various mechanical systems that require overspeed protection,such as:

Gas turbine power plant

Steam boiler and waste incinerator

Central heating and cogeneration power plant

Fuel storage and transportation system

Pumped storage power station

Nuclear power plant

In these applications,BENTLY 3500/53 can monitor the speed of the machine in real time and send out an alarm signal when overspeed occurs,thereby protecting the equipment from damage and ensuring the stability and safety of the production process.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

TRICONEX 3511 is a high-performance pulse input module.The following is a detailed introduction to the module:

1.Product Overview

TRICONEX 3511 is designed for industrial process control and safety instrumented systems(SIS)and features high precision,high reliability and ease of use.The module is capable of collecting pulse signals from rotating equipment(such as turbines,compressors,etc.)and converting them into digital signals for processing and analysis.By communicating with other Triconex modules and external devices,TRICONEX 3511 is able to achieve data sharing and collaborative work between systems.

TRICONEX 3511

2.Technical Features

Triple Redundancy Design:

TRICONEX 3511 adopts triple redundant(TMR)design to ensure that the system can still operate normally when a single component fails.This design improves the reliability and safety of the system and meets strict industry standards such as IEC 61508 and ISA S84.01.

High-precision pulse processing:

The module has 8 input channels,a pulse width resolution of up to 100μs,and a pulse frequency range of 1Hz to 10kHz.In addition,it also supports filter types such as low-pass,high-pass,and band-pass to meet different application requirements.

Multiple output signals:

TRICONEX 3511 provides two output signals,4-20mA and 0-5V,which is convenient for users to choose according to actual needs.

Wide operating temperature range:

The operating temperature range of this module is-40°C to 85°C(-20°C to+50°C under certain parameters),which is suitable for various harsh industrial environments.

High protection level:

The protection level of TRICONEX 3511 is IP67,which can resist the intrusion of dust and moisture,ensuring stable operation under harsh conditions.

Powerful communication capabilities:

The module supports multiple communication protocols,such as Modbus,CAN,Profibus,etc.,which is convenient for data exchange and communication with other devices and control systems.

TRICONEX 3511

III.Application fields

TRICONEX 3511 is widely used in multiple industrial fields,including but not limited to:

Petrochemical:used to measure the speed of turbines and compressors to ensure the stable operation of equipment.

Electricity:used to measure the speed of generators and monitor the operating status of power systems.

Water treatment:used to measure the speed of the pump and optimize the water treatment process.

Pharmaceutical:used to measure the flow rate in the pharmaceutical production process to ensure the stability of product quality.

Metallurgy:used to measure the speed in the metallurgical production process to improve production efficiency.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB PFEA111-65 is a tension controller,commonly used in tension measurement and control applications in the industrial field.The following is a detailed introduction to ABB PFEA111-65:

1.Product Overview

ABB PFEA111-65 tension controller is a high-quality product produced by ABB Group.As a Fortune 500 company,ABB Group has deep strength and rich experience in the field of power and automation technology.This tension controller is designed to ensure the stability of the tension of the material during the production process,thereby ensuring the stability of the production process and the consistency of the product.

2.Working Principle

The working principle of ABB PFEA111-65 tension controller mainly involves three parts:tension sensor,control system and actuator.The tension sensor is installed on the material conveying path to measure the tension change of the material during the conveying process,and convert the measured tension signal into an electrical signal and input it into the control system.After receiving the electrical signal from the tension sensor,the control system performs signal processing and calculation,and compares it with the set tension target value.According to the comparison results,the control system adjusts the output of the actuator by compensating the designed control algorithm to achieve precise control of the material tension.

ABB PFEA111-65

3.Product Features

High-precision measurement and control:ABB PFEA111-65 can measure and control the tension of materials in the production process with high precision,ensuring the stability of the production process and the consistency of the product.

Multiple inputs and outputs:The device has 2 weighing sensor inputs,provides voltage and current outputs,and has adjustable filtering functions,which is convenient for users to set and adjust according to actual needs.

Strong environmental adaptability:It is suitable for environments with IP65 protection level,and can work stably in harsh industrial environments to ensure the continuity and reliability of the production process.

Low power consumption:The power consumption is 8 watts(24 volts),which meets the requirements of energy saving and environmental protection,and reduces the operating costs of enterprises.

ABB PFEA111-65

IV.Application fields

ABB PFEA111-65 tension controller is widely used in multiple industrial fields,including but not limited to:

Textile industry:used for tension control of textile machines to ensure the stability of the tension of yarn or fabric,improve product quality and production efficiency.

Papermaking industry:used for tension control of papermaking machines to ensure the stability of the tension of paper during transmission and avoid paper breakage or deformation.

Plastic film production:used for tension control of plastic film production lines to ensure uniform tension of the film and improve product quality and performance.

Cable and strip production:used for tension control of products such as wires,cables,and metal strips to improve product performance and reduce scrap rates in production.

Packaging industry:used for tension control of packaging machinery to ensure stable tension of packaging materials and improve packaging efficiency and product quality.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

TRICONEX 3625 is a safety redundant controller produced by Triconex(now part of Invensys operations),mainly used to build safety-critical control systems.The following is a detailed introduction to TRICONEX 3625:

1.Product Overview

As part of the TRICONEX Safety Instrumented System(SIS)series,TRICONEX 3625 adopts a triple redundant architecture(TMR)to ensure that the system can still operate normally when a single channel fails.This design provides high availability and reliability,making it very suitable for use in situations where critical infrastructure,industrial processes and personnel safety are protected.

2.Main Features

Triple Redundant Architecture:

TRICONEX 3625 adopts a triple redundant design,with each processor channel operating independently and backing up each other when needed.

This architecture ensures that the system can still operate normally when some components fail,improving the overall reliability of the system.

High-performance processor:

Equipped with a TriCore 32-bit processor(some models such as 3625C1 may use a dual-core PowerPC processor),providing powerful data processing capabilities.

Supports fast fault detection and isolation to ensure that the system responds quickly and accurately.

TRICONEX 3625

Rich communication interfaces:

Provide multiple communication interfaces such as RS-232,RS-485,Ethernet,etc.,which are convenient for data exchange with other devices and systems.

Support Modbus RTU,OPC,DNP3 and other communication protocols,which enhance the interoperability and flexibility of the system.

Wide temperature range and protection level:

The operating temperature range is wide(-40℃to+70℃or+85℃),suitable for various harsh environments.

The protection level reaches IP67,with good waterproof and dustproof performance.

High availability:

Support hot-swap function,which can be maintained without interrupting operation.

Provide intuitive programming language and diagnostic tools to facilitate users to troubleshoot and maintain the system.

TRICONEX 3625

3.Application fields

TRICONEX 3625 is widely used in many fields,including but not limited to:

Oil and gas

Chemical industry

Electric power industry

Nuclear industry

Rail transportation

Aerospace

Medical equipment control,etc.

In these fields,TRICONEX 3625 is usually used in emergency shutdown systems(ESD),fire alarm and control systems(F&A),turbine control systems,power plant control systems,oil and gas pipeline control systems,railway signal control systems,and aircraft control systems.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl