Category: Industry trends

A-B 1756-IF16 is a high-performance industrial automation module,one of the ControlLogix series products of Rockwell Automation(Allen-Bradley)in the United States.The following is a detailed introduction to A-B 1756-IF16:

1.Product Overview

A-B 1756-IF16 is an analog input module,commonly used in industrial control systems,for receiving analog signals and converting them into digital signals for processing and analysis by controllers such as PLC(Programmable Logic Controller)or DCS(Distributed Control System).

A-B 1756-IF16

2.Technical Features

Multi-channel design:The module has 16 analog input channels and can simultaneously receive and process multiple analog signals,such as voltage and current signals.This design enables it to meet the needs of multi-channel signal monitoring in complex control systems.

High resolution:The A-B 1756-IF16 module has high resolution characteristics,which can accurately measure and collect analog input signals.This helps to achieve precise data monitoring and control,ensuring the stability and reliability of the system.Its independent resolution is 320μV/count(15 bits+sign bipolar) ±10.25V input range;160μV/count(16 bits) 0-10.25V input range;80μV/count(16 bits) 0-5.125V input range and 0.32μA/count(16 bits) 0-20.5 mA.

Multiple input type support:The module supports multiple input types,including current,voltage,thermocouples,and RTDs.This flexibility allows it to adapt to different types of sensors and measurement devices to meet various application requirements.

Flexible signal wiring configuration:A-B 1756-IF16 supports three types of signal wiring configurations,including single-ended,differential,and high-speed differential wiring.Single-ended wiring is most sensitive to noise and must be used with signals with a common ground.Differential wiring methods increase noise sensitivity,while high-speed differential wiring is suitable for systems that need to update data quickly relative to the input signal.In single-ended wiring configuration,the module is a 16-channel analog input module;in differential wiring configuration,it is reduced to 8 channels;in high-speed differential wiring configuration,it becomes a 4-channel analog input module.

High sampling rate and cold end compensation:The module usually has a high sampling rate and can monitor the changes of voltage signals in real time.At the same time,it supports cold end compensation function,which can correct the impact of temperature changes on measurement.

Built-in diagnostic function:A-B 1756-IF16 modules usually have built-in diagnostic functions,which can be used to monitor module status and performance,and detect line faults or abnormalities.

Communication interface:The module usually communicates with PLC or DCS through the ControlLogix backplane and supports Ethernet or other communication protocols.The converted data is stored in integer mode(left-aligned,2’s complement)IEEE 32-bit floating point data format.

A-B 1756-IF16

III.Application field

A-B 1756-IF16 modules are widely used in industrial automation,including manufacturing,chemical,energy,medicine and other industries.They are an important part of modern industrial control systems to achieve monitoring and control of various parameters.

IV.Product parameters(partial)

Input signal type:current,voltage,thermocouple,thermal resistor,etc.

Number of input channels:16(can be changed to 8 or 4 according to wiring configuration)

Resolution:as described above

Scan time:single-ended scan time is 16~488 ms;differential wiring is 8~244 ms;high-speed differential wiring is 5~122 ms

Calibration accuracy:better than 0.05%of the voltage input range and 0.15%of the current input range

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

EPRO PR9376 010-011 is a high-performance speed sensor.The following is a detailed introduction to the product:

1.Product Overview

EPRO PR9376 010-011 speed sensor is produced by Emerson and belongs to the PR9376 series.The sensor is mainly used to measure the speed of rotating machinery and is widely used in turbine machinery such as steam engines,gas turbines,turbines,compressors,fans,centrifuges,etc.It can convert the speed of rotating objects into electrical output to meet different speed measurement needs.

EPRO PR9376 010-011

2.Technical Features

High resolution:It can output perfect waveforms even at low speeds to ensure the accuracy of measurement results.

Wide measurement range:The measurement range is wide and suitable for scenarios with different speed requirements.

Stable power supply voltage and wide operating temperature range:Ensure normal operation in various environments.

Based on the Hall effect:It contains a magnetic field generator and a Hall element.When the rotating shaft rotates,the magnetic field generator generates a magnetic field,which will be attracted by a gear with a magnet on the rotating shaft and generate a Hall voltage when the magnet passes through the Hall element.The frequency of the Hall voltage is proportional to the rotation speed of the rotating shaft.

Multiple models and configurations available:The sensor can be provided with mounting threads or rectangular mounting flanges,and the measuring range also covers different sizes to accommodate different objects to be measured.At the same time,the cable length and order number can also be selected according to specific needs.

Easy to calibrate and use:The linear calibration has been performed using calibration materials before leaving the factory,and the user does not need to calibrate again.The user only needs to adjust the air gap between the sensor and the measuring surface to obtain the required signal from the output of the preamplifier.

EPRO PR9376 010-011

III.Application fields

EPRO PR9376 010-011 speed sensor plays an important role in the fields of automobiles,mechanical equipment,industrial automation,etc.Especially in the automotive field,it is one of the key components in the engine management system,which is used to monitor the engine speed and transmit information to the electronic control unit(ECU)to adjust parameters such as fuel injection amount and ignition timing to ensure efficient operation of the engine.

4.Product parameters(partial)

Measuring range:±0.5 mm

Sensitivity:16 V/mm

Frequency range:0-12 kHz(otherwise 10 Hz1000 Hz or 4 Hz1000 Hz)

Head diameter:5 mm

Casing thread:m6x1

Working temperature:up to 200°C

Waterproof protection level:IP 55 or IP 65

Explosion-proof level:EEx ib II B/II C

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

A-B 1756-CN2R is a programmable logic controller(PLC)communication module produced by Rockwell Automation.The following is a detailed introduction to the product:

1.Product Overview

The 1756-CN2R module is part of the Rockwell Automation ControlLogix series PLC,which is specifically used to realize the communication between the PLC system and other devices or systems.The module supports the ControlNet communication protocol,has high performance and reliability,and can meet the needs of various industrial automation applications.

A-B 1756-CN2R

2.Main features

Communication protocol:Supports ControlNet communication protocol to ensure efficient communication in the ControlLogix control system.

Network connection:It has a ControlNet network connection interface,which is convenient for connecting to the ControlNet network to achieve interconnection with other devices.

Data transmission:Supports different data transmission rates to meet the communication needs of different applications.At the same time,it supports real-time data transmission to ensure the real-time requirements of the control system.

Node support:It can support the connection of multiple nodes to achieve extensive communication between devices and modules.

Data acquisition and transmission:It can be used to collect and transmit real-time data,such as control signals,sensor data,etc.,to provide rich information support for the control system.

Module compatibility:compatible with other modules in the ControlLogix series,facilitating the integration and expansion of control systems.

Programmability:supports programmable functions,allowing users to customize settings as needed,improving the flexibility and customizability of the system.

A-B 1756-CN2R

3.Application fields

1756-CN2R modules are widely used in CNC machinery,metallurgy,oil and gas,papermaking and printing,textile printing and dyeing,machinery,electronic manufacturing,automobile manufacturing,tobacco,plastic machinery,power plants,water conservancy treatment/environmental protection,municipal engineering,steel mills,cement plants,robots,rail transit and other fields.In these fields,the module provides efficient and reliable communication support for various industrial automation control systems.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500 42M 140734-02 is a high-performance vibration and position monitor that is widely used in the industrial field to monitor the vibration status of mechanical equipment.The following is a detailed introduction to the product:

I.Product Overview

BENTLY 3500 42M 140734-02 is a four-channel monitor launched by Bently Nevada.It can accept input signals from eddy current displacement sensors,velocity sensors and acceleration sensors,and provide various vibration and position measurements.The product is programmed through the 3500 rack configuration software to achieve real-time monitoring and protection of mechanical equipment vibration and position.

BENTLY 3500 42M 140734-02

II.Main Features

Four-channel design:

Provides four independent monitoring channels,each of which can be independently programmed and configured to meet different monitoring needs.

High-precision measurement:

Can accurately measure the vibration parameters of mechanical equipment,including displacement,velocity and acceleration,to ensure the accuracy of monitoring results.

User programmability:

Users can program the monitor through the 3500 rack configuration software,set alarm values,measurement parameters,etc.,to improve the flexibility and operability of monitoring.

Multiple measurement functions:

Support multiple measurement functions such as radial vibration,axial position,eccentricity,differential expansion,acceleration,speed,etc.to meet the needs of different application scenarios.

Redundant power supply design(for redundant power supply module 140734-02):

The redundant design includes main power supply and backup power supply to ensure that the backup power supply can take over immediately when the main power supply fails,ensuring continuous and uninterrupted operation of the system.

Fault diagnosis function:

The front panel of the monitor is equipped with LED indicators,which can display the operating status and fault information of the monitor,so that users can find and handle faults in time.

BENTLY 3500 42M 140734-02

III.Application field

BENTLY 3500 42M 140734-02 is widely used in vibration monitoring of large and medium-sized rotating machinery such as steam turbines,compressors,fans,water pumps,coal mills,gearboxes,motors,etc.In the steel,electric power,metallurgy,chemical,petrochemical and other industries,this product plays an important role in ensuring the safe operation of equipment and improving production efficiency.

4.Technical specifications(partial)

Input impedance:10kΩ

Power consumption:7.7W(standard I/O)

Measurement range:

Radial vibration:3.94 mV/μm(100 mV/mil)or 7.87 mV/μm(200 mV/mil)

Axial displacement:3.94 mV/μm(100 mV/mil)or 7.87 mV/μm(200 mV/mil)

Eccentricity:3.94 mV/μm(100 mV/mil)or 7.87 mV/μm(200 mV/mil)

Differential expansion:0.394 mV/μm(10 mV/mil)or 0.787 mV/μm(20 mV/mil)

Dual acceleration:10 mV/(m/s²)(100 mV/g)

Dual velocity:20 mV/(mm/s)pk(500 mV/(in/s)pk)etc.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

EMERSON 1C31166G02 is a controller or card produced by Emerson.The following is a detailed introduction to the product:

1.Product Overview

EMERSON 1C31166G02 is an important product in the Emerson series,usually used in industrial automation,machine control,process control and other fields.This product integrates the design essence of”centralized management and decentralized control”of traditional DCS(distributed control system)and retains the flexibility and advantages of traditional PLC(programmable logic controller).It is suitable for various occasions such as discrete control,sequential control and continuous control.

EMERSON 1C31166G02

2.Functional Features

Data processing and algorithm execution:

The product is equipped with a powerful processor that can execute various control algorithms,data processing and decision logic.

Input/output interface:

Provides a rich external device connection interface for receiving sensor data,controlling actuators or communicating with other devices.

Communication function:

Supports multiple communication protocols and interfaces,such as Ethernet,serial communication(such as RS-232,RS-485),CAN bus,etc.,which is convenient for data exchange and remote control with other devices or systems.

Status monitoring and fault diagnosis:

It has the function of monitoring the system status and operating conditions,can detect faults in time and provide diagnostic information,which helps to quickly locate problems and take corresponding maintenance measures.

Programmability:

This product has programmable functions,allowing users to customize and configure according to specific needs,improving the flexibility and adaptability of the system.

EMERSON 1C31166G02

III.Application fields

EMERSON 1C31166G02 is widely used in industrial automation control systems,manufacturing,chemical,petroleum,power and other industries.In these fields,the product can achieve precise control and monitoring of various equipment and systems,improve production efficiency,reduce energy consumption and failure rate.

IV.Technical specifications

The specific technical specifications of EMERSON 1C31166G02 may vary depending on the product version and manufacturer.But in general,the product may have the following basic technical parameters:

Operating voltage:meets standard voltage requirements.

Output frequency:reaches the standard kHz level.

Origin:may be produced in Europe and the United States.

Series:belongs to the DCS/PLC system series.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

A-B 1756-CN2R is a communication module for Allen-Bradley,also known as Rockwell Automation’s ControlLogix controller platform.The following is a detailed introduction to the module:

1.Main functions

It is mainly used to build a ControlNet network in the ControlLogix system to achieve real-time communication between multiple devices.

It provides ControlNet networks through the Common Industrial Protocol(CIP)and peer-to-peer networks,and has enhanced functions.

2.Technical specifications

Interface:2 ControlNet BNC ports(supporting 5 Mbps),1 USB communication port(supporting 12 Mbps).Some materials also mention 1 ControlNet RJ45 port,but not all descriptions include this port,which may vary depending on the product version or configuration.

Network topology:Supports multiple topologies such as linear,star,and tree.

Number of nodes:Supports up to 99 nodes(some materials mention that up to 128 Logix communication connections and 131 communication connections can be supported,but 99 nodes are a common limitation of ControlNet networks).

Data rate:5 Mbps.

Power supply:5.1V DC or 24V DC.

A-B 1756-CN2R

Other parameters:

Current draw is 1300mA at 5.1V DC and 3mA at 24V DC.

Dissipates 6.6W(or 6.7W,depending on the material)of heat at 22.5 BTU/hr(or 22.9 BTU/hr,depending on the material).

Has 30V DC isolation voltage and basic insulation tested at 500V for one minute between ControlNet and the system.

III.Features and Benefits

High-speed communication:Provides high-speed data transmission to meet the needs of real-time control.

High reliability:Supports redundant configuration to improve network reliability.

Flexibility:Can be installed into any available slot of a standard chassis,such as 1756-A4,1756-A7,etc.,and used with a standard ControlLogix power supply.

Scalability:Suitable for implementing distributed I/O topologies,can cover 1000 meters per segment,and can be easily expanded by using repeaters as signal boosters for control network segments over 1000 meters.

Compatibility:Can communicate with human-machine interface(HMI)devices and supervisory control and data acquisition(SCADA)systems.

A-B 1756-CN2R

IV.Application scenarios

A-B 1756-CN2R communication module is widely used in various industrial automation control systems,such as production line automation,mechanical equipment control,process flow management,etc.It can realize real-time communication and data exchange between devices,and improve production efficiency and quality.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB PFEA111-65 is a high-performance tension control device.The following is a detailed introduction to the product:

1.Product Overview

The PFEA111-65 tension controller is a tension control solution launched by ABB for the field of industrial automation.It uses advanced PID control algorithms to monitor and control the tension changes of continuous materials such as wire,film,paper,etc.during production or processing in real time to ensure product quality and production efficiency.

2.Main features

High-precision measurement and control:

The PFEA111-65 tension controller has high-precision measurement and control capabilities,can monitor tension changes in real time,and achieve fast and accurate tension adjustment through PID control algorithms.

Multiple control methods:

The controller supports multiple control methods,such as manual adjustment,automatic adjustment,etc.Users can choose the appropriate control method according to specific needs to improve the flexibility and operability of control.

ABB PFEA111-65

Digital communication function:

The PFEA111-65 tension controller is equipped with RS232/485 digital communication interface,which can communicate and transmit data digitally with host computers,PLCs and other devices to achieve automatic control and data acquisition.

Industrial-grade design:

The controller adopts industrial-grade design,which is durable,reliable and adaptable to harsh environments.It can operate stably in various industrial environments.

Easy to install and debug:

The PFEA111-65 tension controller is small in size,light in weight and easy to install.At the same time,it can be quickly debugged and set through the digital display and buttons on the front panel,saving users’time and energy.

III.Technical specifications

Working voltage:24VDC

Measuring range:0~65N

Control mode:PID control

Current output:0/4~20mA

Digital communication interface:RS232/485

Working temperature:0~60°C(some say+5 to+55°C,non-working temperature is-40 to+70°C)

Dimensions:180 x 120 x 100 mm

Weight:1.9 kg

In addition,the controller also supports ramp and triangle wave output,with a frequency range of 0.1 Hz to 100 kHz.In terms of accuracy,the accuracy of sine wave and ramp wave can reach 130 ppm(frequency<10 kHz)and 50 ppm(frequency>10 kHz),while the accuracy of square wave and pulse can also reach the corresponding standards.

ABB PFEA111-65

IV.Application Fields

PFEA111-65 tension controller is widely used in industrial fields such as manufacturing,chemical industry,power,oil and gas.Specific application scenarios include printing machines,coating machines,paper processing machines,textile machinery,cigarette machines,packaging machines and metal processing equipment,etc.,which are used to control and maintain the tension of continuous materials during processing,production or printing to ensure product quality and production efficiency.

V.Installation and commissioning

When installing and commissioning the PFEA111-65 tension controller,the instructions provided by the manufacturer should be followed.This includes correct wiring and settings to ensure that the controller can work properly.At the same time,the following points should also be noted:

Make sure there is enough space to fully open the cabinet cover and ensure that there is enough working space in front of the cabinet.

Use the provided cable gland for cable management.

The input power voltage must be equipped with a fuse and a disconnect device outside the tension electronics.

Make ground connections as instructed in the installation guide to ensure good ground connections for internal logic,EMI immunity,and RF emissions.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB UNITROL 1010 is a high-performance product produced by ABB Group.The following is a detailed introduction to the product:

1.Product Overview

ABB UNITROL 1010 is a powerful small indirect excitation system designed for small and medium-sized synchronous generators and industrial machines.It is based on advanced microprocessor technology and IGBT semiconductor devices to provide stable and reliable excitation control.The system fully complies with DNV and UL standards and is suitable for a variety of harsh industrial environments and temperature ranges.

ABB UNITROL 1010

2.Technical Features

Built-in dual-channel support:UNITROL 1010 has built-in support for dual channels,which can be used for advanced load sharing in parallel-running units.This helps ensure optimal excitation control and performance in multi-unit systems.

Rotating diode monitoring:The system has a rotating diode monitoring function that can monitor the operating status of the diode in real time to ensure the stability and reliability of the excitation system.

Automatic synchronization:UNITROL 1010 has an automatic synchronization function that can accurately synchronize the clock with other devices or systems to improve the accuracy and reliability of data acquisition and excitation control.

Multiple integrated communication options:The system provides multiple integrated communication options,such as Ethernet,USB connection,etc.,which facilitates users to exchange data and communicate with other devices or systems.

High-performance operation:UNITROL 1010 can perform high-performance operation under harsh conditions and different temperature ranges,ensuring stable excitation control in various environments.

ABB UNITROL 1010

III.Application fields

ABB UNITROL 1010 is widely used in various industrial fields,including but not limited to:

Power generation:Applicable to power power plants of various sizes to provide stable excitation control for generators.

Ship propulsion:In the ship electrical propulsion system,UNITROL 1010 provides reliable excitation control for the ship’s propulsion motor.

Diesel locomotive:In diesel-electric locomotives,the system provides excitation control for the locomotive’s generator and motor to ensure the normal operation of the locomotive.

Industrial equipment:Applicable to various industrial equipment,such as port cranes,mining trucks,etc.,to provide stable power support for these equipment.

IV.Product advantages

Stability:UNITROL 1010 uses advanced microprocessor technology and IGBT semiconductor devices to ensure the stability and reliability of the system.

Compatibility:The system fully complies with DNV and UL standards and can be compatible and integrated with various devices and systems.

Ease of use:UNITROL 1010 has a user-friendly interface and simple operation process,which is convenient for users to operate and maintain the system.

Scalability:The system provides a variety of communication options and interfaces,which is convenient for users to expand and upgrade the system.

V.Product parameters(partial)

Current output:Up to 10ADC,suitable for continuous operation.

Dimensions:Shares the same interface and dimensions as UNITROL 1020.

Standard compliance:Fully compliant with DNV and UL standards.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 106M1079-01,usually used with the model prefix 3500/15,that is,BENTLY 3500/15 106M1079-01,is an AC power module designed for Bently Nevada vibration monitoring systems.The following is a detailed introduction to the product:

I.Product Overview

The BENTLY 3500/15 106M1079-01 AC power module is a high-performance product launched by Bently Nevada.It can provide stable and reliable power for vibration monitoring systems to ensure the normal operation of sensors,monitors and other equipment in the system.This module is widely used in fields such as petroleum,chemical,electric power,aerospace and manufacturing,providing important support for industrial automation and process control.

II.Technical Features

High reliability:It adopts high-quality electronic components and advanced circuit design,with high reliability and stability,can operate stably in harsh industrial environments,and ensure continuous and reliable power output.

Wide input range:It has a wide input range,which can adapt to different AC power input requirements,and improves the adaptability and flexibility of the module.

High efficiency and energy saving:With high conversion efficiency,it can reduce energy consumption and reduce operating costs.At the same time,it supports hot-swap function,which is convenient for maintenance and replacement,further improving energy efficiency and availability.

Multiple protection functions:It is equipped with multiple protection functions,such as over-current protection,over-voltage protection,over-temperature protection,etc.,to protect the module itself and the connected devices from damage caused by power-related problems.

Programmable function:Supports programmable function,and users can implement different control logic and algorithms through programming to meet different application requirements.This increases the flexibility and customizability of the module.

Good compatibility:Compatible with other modules of the Bently 3500 series,which is convenient for users to expand and integrate,and reduces the cost of the overall solution.

BENTLY 106M1079-01

3.Application field

Vibration monitoring system:used to monitor the vibration,bearing status and mechanical health of rotating equipment,and timely identify and report possible mechanical problems.

Equipment health monitoring:By providing a stable power supply,it helps to ensure the normal operation of the equipment health monitoring system and prevent equipment failure.

Electrical equipment monitoring:It can be connected to the electrical equipment monitoring system to monitor the status of generators,motors and other electrical equipment to prevent electrical failures.

Industrial automation system:In industrial automation,it can be used to power control systems,sensors and actuators to ensure the normal operation of industrial processes.

Process control:In chemical,manufacturing and other process industries,it may be used to power process control systems to ensure the monitoring and control of key parameters.

Power system monitoring:Used to connect to the power system monitoring system to monitor vibration,temperature and other key parameters in the power network.

Environmental monitoring:It can be used to connect to the environmental monitoring system to ensure the normal operation of environmental sensors and monitor parameters such as temperature and humidity.

BENTLY 106M1079-01

IV.Product parameters(partial)

Brand:BENTLY

Model:3500/15 106M1079-01

Voltage:Usually 180V(or customized according to specific needs)

Weight:1.6kg

Origin:United States

Warranty:1 year(the specific warranty period may vary depending on the sales channel and purchase agreement)

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB 1TGE120021R0010 is a powerful analog output module.The following is a detailed introduction to the module:

1.Product Overview

ABB 1TGE120021R0010 module is an analog output module launched by ABB.The module has the characteristics of high precision,high stability and reliability.It is widely used in industrial automation control systems,building automation,HVAC control and power generation.

ABB 1TGE120021R0010

2.Functional Features

Analog output:The module has two analog output channels,each with 12-bit resolution,which can output 0 to 10V or 4 to 20mA analog signals for driving external actuators or sensors.

High precision:Through high-precision analog output,the module can achieve precise control of external devices and improve the control accuracy and stability of the entire system.

Configurability:Users can configure the module’s output range,resolution and other parameters according to actual needs to meet the needs of different application scenarios.

Isolation design:The module adopts isolation design,which can effectively prevent the influence of electrical interference and noise on the system and improve the system’s anti-interference ability and stability.

DIN rail installation:The module supports DIN rail installation,which is convenient for users to install and debug.

ABB 1TGE120021R0010

3.Technical specifications

The following are some main technical specifications of the ABB 1TGE120021R0010 module:

Model:1TGE120021R0010

Brand:ABB

Number of analog output channels:2

Resolution:12 bits

Output range:0 to 10V or 4 to 20mA

Isolation design:Yes

Installation method:DIN rail installation

4.Application areas

ABB 1TGE120021R0010 module is widely used in the following fields:

Industrial automation control system:used to convert the analog signal of the control system into a voltage or current signal that can be used to drive the actuator to achieve precise control of industrial equipment.

Building automation:used for environmental control,lighting control and other systems in the building to improve the intelligence level and comfort of the building.

HVAC control:used for the control of HVAC systems to achieve precise adjustment of parameters such as temperature and humidity.

Power generation:used in the control system of power plants to monitor and control the operating status of power generation equipment.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl