BENTLY 3500 42M 140734-02缩略图

BENTLY 3500 42M 140734-02

BENTLY 3500/42M 140734-02 is a four-channel monitoring module produced by Bently,mainly used for vibration and position measurement.The following is a detailed introduction to the module:

I.Product Overview

BENTLY 3500/42M 140734-02 is a high-performance four-channel monitor that can receive signals from displacement,velocity,and acceleration sensors,and complete various vibration and displacement measurements by processing these signals.At the same time,it can also compare the processed signals with the alarm set points programmed by the user,provide mechanical protection,and return status values.

BENTLY 3500 42M 140734-02插图

BENTLY 3500 42M 140734-02

 

 

II.Main functions

Multi-channel monitoring:The module has four independent monitoring channels,each of which can receive signals from different types of sensors,such as displacement,velocity,acceleration sensors,etc.

Vibration and displacement measurement:It can accurately measure the vibration and displacement parameters of mechanical equipment,including radial vibration,axial displacement,differential expansion,shaft eccentricity,etc.

User programmability:Users can program the module through the 3500 framework configuration software to set alarm values,measurement parameters,etc.to meet different monitoring needs.

Mechanical protection:The monitor will compare the signal with the alarm point set by the user.Once the set value is exceeded,the alarm system will be triggered to achieve mechanical protection.

Status return:The monitor also returns the status values​​of the monitor and the channel,including hardware failure,sensor failure,etc.,to facilitate users to perform fault diagnosis and maintenance.

III.Technical specifications

Model:3500/42M 140734-02

Brand:Bently

Input signal:Receive 1 to 4 displacement,velocity or acceleration sensor signals.

Input impedance:Standard I/O(input/output module):10kΩ.

Sensitivity:

Radial vibration:3.94mV/μm(100mV/mil)or 7.87mV/μm(200mV/mil).

Axial displacement:3.94mV/μm(100mV/mil)or 7.87mV/μm(200mV/mil).

Eccentricity:3.94mV/μm(100mV/mil)or 7.87mV/μm(200mV/mil).

Differential expansion:0.394mV/μm(10mV/mil)or 0.787mV/μm(20mV/mil).

REBAM®:40mV/μm(1000mV/mil)or 80mV/μm(2000mV/mil).

Dual acceleration:10mV/(m/s²)(100mV/g).

Output:

Front panel LEDs:OK LED,TX/RX LED,Kypass LED,indicating module operation and communication status.

Recorder output:+4 to+20mA,proportional to the full scale of the monitor.Each channel has its own separate recorder output value,and a short circuit in the recorder output does not affect the monitor operation.

BENTLY 3500 42M 140734-02插图1

BENTLY 3500 42M 140734-02

Environmental restrictions:

Operating temperature:-30℃to+65℃when using internal/external terminal I/O modules;0℃to+65℃when using I/O modules with internal safety barriers(internal terminals).

Storage temperature:-40℃to+85℃.

Monitor module:occupies one full-height front panel slot.

I/O module:occupies one full-height rear panel slot.

IV.Application areas

BENTLY 3500/42M 140734-02 module is widely used in vibration monitoring of large and medium-sized rotating machinery such as steam turbines,compressors,fans,water pumps,coal mills,gearboxes,motors,etc.In the steel,power,metallurgy,chemical,petrochemical and other industries,this module plays an important role in ensuring the safe operation of equipment and improving production efficiency.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

HONEYWELL FC-SAI-1620M缩略图

HONEYWELL FC-SAI-1620M

HONEYWELL FC-SAI-1620M is a powerful analog input card,widely used in industrial control systems.The following is a detailed introduction:

1.Product Overview

HONEYWELL FC-SAI-1620M analog input card can receive and process analog input signals from sensors,transmitters or other analog signal sources,such as voltage signals,current signals,etc.It usually has multiple input channels and can process multiple analog signals at the same time,which is suitable for scenarios where multiple signals are monitored and controlled.

HONEYWELL FC-SAI-1620M插图

HONEYWELL FC-SAI-1620M

 

2.Product Features

Multi-channel support:FC-SAI-1620M has 16 input channels and can receive and process up to 16 analog signals at the same time to meet the needs of complex industrial control systems.

High-precision sampling:This analog input card has high-precision signal sampling capabilities,which can accurately capture and process input signals to ensure data accuracy and reliability.

Signal processing function:FC-SAI-1620M has built-in signal processing functions such as filtering,amplification,compensation,etc.,which can pre-process the input signal to meet the needs of the system.

Communication interface:This analog input card transmits and communicates with the control system through a digital bus or other communication interface to achieve data exchange and information sharing with other devices.

Reliability and stability:As one of the key components of the industrial control system,the FC-SAI-1620M has high reliability and stability,can operate stably for a long time in harsh working environments,and has a certain anti-interference ability.

HONEYWELL FC-SAI-1620M插图1

HONEYWELL FC-SAI-1620M

III.Product specifications

Number of channels:16 channels.

Input signal:Usually supports 0(4)~20mA current signal input.

Power supply:Supports 24VDC power supply.

Installation method:Card holder installation,easy to integrate into the industrial control system.

Dimensions and weight:The dimensions are approximately 10.2×7.6×1.2 inches and the weight is approximately 1.2 pounds.

IV.Application areas

The HONEYWELL FC-SAI-1620M analog input card is widely used in various industrial control systems,such as automated production lines,process control systems,sensor monitoring,etc.It can be used to monitor and control various analog signals to achieve automated control and data acquisition.

 

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

A-B 1747-L541缩略图

A-B 1747-L541

The A-B 1747-L541 is a PLC(Programmable Logic Controller)module from the Allen-Bradley brand.Specifically,it belongs to the SLC 5/04 controller in the SLC 500 series.The following is a detailed introduction to the module:

I.Basic attributes

Model:1747-L541

Brand:Allen-Bradley(A-B,part of Rockwell Automation)

Series:SLC 500 series

Function:PLC controller with integrated 16KB user memory

II.Technical specifications

Memory:16K,32K or 64K words of memory(16KB for 1747-L541)

I/O point control:Up to 4096 input and output points can be controlled

Communication:

Built-in DH+channel supports extended messaging capabilities and high-speed communication.

RS-232 channel to support DF1 radio modem,DH-485,ASCII and Modbus RTU communications.

The RS232 communication port can be configured for DF1 and DH485 point-to-point topologies,and DH+communication supports long-distance and multi-drop topologies.

Programming:Includes advanced math instructions and a variety of additional instructions.

A-B 1747-L541插图

A-B 1747-L541

 

Other features:

Supports remote I/O,DeviceNet direct and indirect addressing.

Typical program scan time per keyword is 0.9 milliseconds,and typical I/O scan time is 0.225 milliseconds.

Requires a backplane current load of 1 amp at 5 volts DC and 200 milliamps at 24 volts DC.

Has a 1 millisecond selectable timed interrupt(STI)and a 0.5 millisecond discrete input interrupt(DII).

Uses 64KB of memory based on 1747-M13 flash memory for program and data table storage.

A-B 1747-L541插图1

A-B 1747-L541

III.Physical Features

Front panel:Includes a 3-position key switch for selecting run,remote or program mode.

Status indicators:Has run,FLT,battery,force,DH+and RS-232 LED status indicators for troubleshooting and diagnostics.

IV.Application scenarios and installation requirements

Application scenarios:Very suitable for use in medium-sized applications,and can implement distributed IO applications by using communication adapters on the CPU rack and communication scanners on the IO rack.

Installation requirements:An SLC 500 rack is required to install and connect to the electronic backplane,and the system power supply is required to power the internal circuits of the processor through the electronic backplane.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500 42M 176449-02缩略图

BENTLY 3500 42M 176449-02

BENTLY 3500/42M 176449-02 is a vibration/displacement monitoring module produced by Bently Nevada,USA.The following is a detailed introduction to the product:

1.Product Overview

Brand:Bently Nevada

Model:3500/42M 176449-02

Type:Vibration/Displacement Monitoring Module

2.Main Functions

Vibration Monitoring:It can monitor the vibration level of rotating mechanical equipment in real time to help evaluate the operating status of the equipment.

Displacement Monitoring:In addition to vibration monitoring,it can also monitor the displacement of the equipment to provide comprehensive health monitoring.

Temperature Monitoring:Some information shows that the module can also monitor the temperature of the equipment,but the specific function may vary depending on the product version or customized requirements.

Alarm and Protection Function:When the vibration,displacement or temperature(if applicable)is detected to be out of the normal range,it can sound an alarm and start the protection mechanism to prevent further damage to the equipment.

BENTLY 3500 42M 176449-02插图

BENTLY 3500 42M 176449-02

 

3.Technical Specifications

Number of Channels:It has 4 independent analog input channels,each with an independent amplifier and sampling circuit.

Resolution:Provides up to 24-bit resolution to ensure the accuracy of measurement results.

Input range:Supports a variety of adjustable input ranges to meet the amplitude requirements of different signal sources.

Calibration function:With built-in automatic calibration function,each channel can be calibrated during the measurement process to improve the accuracy and reliability of the measurement.

Operating temperature range:From-40°C to+85°C(or different depending on the specific product version),it can adapt to various industrial environments.

Sensitivity:When correctly terminated and positioned at the calibration angle,it is 20mV/mm/s(500 mV/in/s)±5%at 100 Hz(6000 cpm)(the specific value may vary depending on the product version or customized requirements).

Frequency response:From the minimum operating frequency(see ordering information)to 1 kHz(60000 cpm),the typical value is from+0 to±3dB.

BENTLY 3500 42M 176449-02插图1

BENTLY 3500 42M 176449-02

4.Application Scenarios

BENTLY 3500/42M 176449-02 is widely used in power generation,chemical industry,metallurgy,petroleum,cement and other industrial sectors to monitor the vibration and displacement of large rotating machinery,such as shaft vibration,bearing vibration,expansion difference,swing,eccentricity,axial displacement and casing expansion of turbines,compressors,water pumps,etc.

5.Product Advantages

High-precision measurement:Provides up to 24-bit resolution and low noise level to ensure the accuracy of measurement results.

High channel density:With 4 independent analog input channels,it can measure and control multiple signal sources at the same time,improving the efficiency of testing and measurement.

Strong flexibility:Supports a variety of adjustable input ranges to meet the amplitude requirements of different signal sources.

High reliability:With built-in automatic calibration function and powerful software support,it improves the accuracy and reliability of measurement.

 

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB D674A906U01缩略图

ABB D674A906U01

ABB D674A906U01 is an automation processor module or digital input module produced by ABB.The following is a detailed introduction to the module:

1.Product Overview

ABB D674A906U01 module is usually used in the automation and control systems produced by ABB,and is an important part of the industrial automation field.The module has the characteristics of high performance,high reliability and easy expansion,and can meet the needs of various industrial automation applications.

2.Main functions

Data processing:ABB D674A906U01 module can perform data processing tasks of the control system,including data acquisition,storage,conversion and transmission.

Control logic:The module supports complex control logic,can process input signals according to preset algorithms and conditions,and output corresponding control signals.

Communication function:The module has strong communication capabilities and can exchange data and transmit instructions with other control systems,sensors,actuators and other devices.

Monitoring and diagnosis:Through the built-in monitoring and diagnosis functions,users can monitor the operating status of the module in real time,and promptly detect and handle potential faults.

ABB D674A906U01插图

ABB D674A906U01

3.Technical specifications

Model:D674A906U01

Brand:ABB

Application:data processing,control logic,communication and monitoring functions in automation control systems

Range:The voltage or current range of the input signal(depending on the application scenario)

Accuracy:The accuracy of the module when processing data(the specific value may vary depending on the product batch and application scenario)

Specification size:290*10*50mm(or other specific dimensions,determined according to the product manual or supplier information)

Output method:may include RS232,485 interface,420mA or 204mA analog signal output,and relay output,etc.(the specific output method may vary depending on the product model and application scenario)

Power supply:110/220VAC or DC24V(the specific power supply voltage may vary depending on the product model and regional differences)

Using temperature:-20~60℃(the specific operating temperature range may vary depending on the product model and working environment)

Protection level:IP-65(indicates that the module has high dust and water resistance)

ABB D674A906U01插图1

ABB D674A906U01

 

4.Application areas

ABB The D674A906U01 module is widely used in various fields such as industrial automation systems,power systems,manufacturing,processing plants,water treatment,etc.In industrial automation systems,this module can be used as an important part of the control system to realize data collection,processing and execution of control logic;in power systems,it can be used to monitor and protect the safe operation of power equipment;in manufacturing,this module can be used for production line automation control and fault diagnosis.

 

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

TRICONEX 3101缩略图

TRICONEX 3101

TRICONEX 3101 is the core component of the Triconex series control system.The following is a detailed introduction to the product:

1.Product positioning and functions

The TRICONEX 3101 main processor module is a high-performance,high-reliability component designed for industrial automation and safety control.It provides high redundancy functions,supports high-speed,real-time data processing and decision-making,and is suitable for highly complex and demanding control tasks.

2.Technical features

High redundancy design:

The triple redundancy(TMR)structure is adopted to ensure that the system can continue to operate stably and safely when some modules fail.

Real-time processing capability:

Supports high-speed,real-time data processing and decision-making to ensure the immediate execution of key control operations.

TRICONEX 3101插图

TRICONEX 3101

 

High security:

Complies with the SIL3 safety standard and is suitable for critical applications requiring high security.

Powerful computing power:

Capable of processing large amounts of input and output data,supporting complex control and decision-making logic.

Multiple communication interfaces:

Supports multiple communication protocols,such as Modbus,Ethernet,etc.,and can be seamlessly integrated with other control systems or devices.

3.Application scenarios

TRICONEX 3101 processor modules are widely used in industries such as oil,gas,chemicals,and electric power to provide reliable automation control and monitoring.Specific application scenarios include but are not limited to:

Process control:

In industries such as oil,gas,and chemicals,it is used to control parameters in various production processes to ensure the stability and safety of the production process.

Safety instrument system(SIS):

Used to ensure process safety,equipment protection,and emergency shutdown to prevent potential safety risks.

Emergency shutdown system(ESD):

Perform emergency shutdown operations in critical situations to prevent catastrophic events.

Distributed control system(DCS):

Provide efficient distributed control and management to ensure the safe operation of key equipment.

TRICONEX 3101插图1

TRICONEX 3101

4.Product advantages

High reliability and redundant design:

Ensure that the system can operate stably for a long time in harsh working environments,reducing failure and maintenance costs.

Easy to expand and integrate:

Supports flexible configuration and modular design,which is convenient for users to expand and integrate according to actual needs.

Easy to operate and maintain:

Equipped with an easy-to-operate control panel and visual interface,users can easily access and operate the equipment.At the same time,it supports online debugging and diagnostic functions to facilitate users to troubleshoot and maintain.

 

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500 92 136180-01缩略图

BENTLY 3500 92 136180-01

BENTLY 3500/92 136180-01 is a communication gateway module or power controller produced by Bently Nevada.The following is a detailed interpretation of the product:

1.Product Overview

Brand and Manufacturer:Bently Nevada

Model:3500/92 136180-01

Type:Communication Gateway Module/Power Controller

BENTLY 3500 92 136180-01插图

BENTLY 3500 92 136180-01

 

2.Main Functions

Vibration Monitoring and Mechanical Health Management:

This product can be used in vibration monitoring and mechanical health management systems to provide power supply for sensors,monitoring devices and other key components in the system to ensure the normal operation of the vibration monitoring system.

Rotating Equipment Monitoring:

It can be used to monitor and protect rotating equipment such as turbines,generators,compressors,etc.,provide reliable power supply,and support vibration monitoring systems for real-time monitoring and fault diagnosis of equipment.

Communication Capabilities:

It has extensive serial(RS232/RS422/RS485)and Ethernet TCP/IP communication capabilities for integrating all rack monitoring values​​and status with process control and other automation systems.

Supports Ethernet communications with data acquisition software and 3500 Rack Configuration software.

Supported protocols include Modicon Modbus(via serial communications),Modbus/TCP(serial Modbus variant for TCP/IP Ethernet communications),and Bently Nevada proprietary protocol(for communications with 3500 Rack Configuration and Data Acquisition software packages).

BENTLY 3500 92 136180-01插图1

BENTLY 3500 92 136180-01

3.Technical specifications

Power consumption:Typical value 5.0 watts(may vary depending on the specific I/O module type)

Dimensions:241 mm high,24.4 mm wide,242 mm deep

Weight:0.82 kg(specific weight may vary depending on configuration and manufacturer)

Ambient temperature:operating temperature-30 to+65 degrees Celsius,storage temperature-40 to+85 degrees Celsius

Humidity:95%,non-condensing

Interface:RS-232,etc.

Working voltage:180V(or other voltage depending on the specific configuration)

4.Application scenarios

Energy industry:widely used in power plants,nuclear power plants,oil and gas facilities and other fields to provide power support for vibration monitoring and mechanical health management systems.

Industrial automation:can be used in industrial automation systems to provide power for automation control equipment and monitoring systems to ensure stable operation and safe control of equipment.

 

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

A-B 842E-CM-MIP3BA缩略图

A-B 842E-CM-MIP3BA

A-B 842E-CM-MIP3BA,usually refers to the 842E-CM-MIP3BA encoder under the Allen-Bradley brand,which is an EtherNet/IP absolute encoder produced by Rockwell Automation.The following is a detailed introduction to it:

I.Product Overview

The 842E-CM-MIP3BA encoder uses the EtherNet/IP protocol and can be easily integrated into Rockwell Automation control systems.It is an ultra-high-resolution encoder with an EtherNet/IP interface and uses time synchronization for motion control.These encoders provide 18-bit single-turn resolution and 30-bit multi-turn resolution,enabling high-precision control of equipment such as motors and servo systems.

II.Technical characteristics

Electrical characteristics:

Bus connection:EtherNet/IP,compliant with IEC 61784-1 standard.

CIP synchronization:Supports IEEE 1588(IEC 61588)precision clock synchronization.

Transmission rate:10/100 MBit/s.

Transmission medium:Cat-5e cable.

Code type:Binary.

Operating voltage range:10~30 V.

Power consumption:3.0 W.

Resolution and accuracy:

Resolution:262,144(18 bits).

Maximum number of revolutions:4,096(12 bits).

A-B 842E-CM-MIP3BA插图

A-B 842E-CM-MIP3BA

 

Error limit:±0.03°.

Repeatability:±0.002°.

Mechanical characteristics:

Inertia moment:rotor(solid shaft)≤6.2 gcm²,rotor(blind hollow shaft)≤35 gcm².

Operating speed:max.9,000 RPM(solid shaft),max.6,000 RPM(blind hollow shaft).

Shaft load:max.80 N radially(solid shaft),max.40 N axially(solid shaft).

Permissible shaft displacement:radial(static/dynamic):±0.3/±0.05 mm(blind hollow shaft),axial(static/dynamic):±0.5/±0.1 mm(blind hollow shaft).

Environmental adaptability:

Housing material:Aluminum.

Shaft material:Stainless steel.

Operating temperature range:-30+85°C(-22+185°F).

Storage temperature range:-40+100°C(-40+212°F).

Relative humidity:90%.

Shock resistance:100 g/6 ms.

Vibration resistance:20 g/10~2000 Hz.

Shaft protection grade:IP65.

Housing protection grade:IP67.

Other characteristics:

Weight:0.2 kg(0.44 lb).

Compliant standards:EN 61000-6-2 and EN 61000-6-3 EMC.

The encoder has an embedded EtherNet/IP switch,which can be connected in series with additional E/IP function products,and supports device-level ring(DLR),which can achieve Ethernet media redundancy.

A-B 842E-CM-MIP3BA插图1

A-B 842E-CM-MIP3BA

3.Application areas

The 842E-CM-MIP3BA encoder is widely used in industrial automation,such as motion control of packaging machines,robots,printing machines and other equipment.It provides precise position feedback and is suitable for application scenarios that require high-precision position feedback.

 

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500 25缩略图

BENTLY 3500 25

BENTLY 3500/25 may refer to a product of Bently Nevada.Specifically,it may be an enhanced key phaser module or monitoring system.The following is a detailed introduction to BENTLY 3500/25:

1.Product Overview

BENTLY 3500/25 is a high-performance monitoring module or system that is widely used in the industrial field,especially in the monitoring and protection of mechanical equipment and rotating machinery.It can receive input signals from proximity probes or magnetic pickups and convert these signals into digital key signals to provide accurate data for subsequent vibration analysis,condition monitoring and fault warning.

BENTLY 3500 25插图

BENTLY 3500 25

 

2.Product Features

High Precision:

BENTLY 3500/25 can accurately detect key phaser signals to ensure the accuracy of vibration analysis.

High Reliability:

Adopting industrial-grade design,it is suitable for harsh industrial environments and has excellent stability and durability.

Strong Compatibility:

Compatible with other modules of the Bently Nevada 3500 series,it can be easily integrated into existing systems for seamless connection and expansion.

Easy to install:

Modular design,easy installation,can be quickly deployed to the equipment that needs to be monitored.

Versatility:

In addition to the basic key phaser signal processing function,it can also be used as a trigger signal source to trigger the action of other equipment.

BENTLY 3500 25插图1

BENTLY 3500 25

III.Product parameters

(The following parameters may vary depending on the specific model and configuration)

Input signal:sensor signal from proximity probe sensor or magnetic pickup,input signal range is+0.8V to-21.0V(non-isolated I/O module)or+5V to-11V(isolated I/O module).

Output signal:digital signal for subsequent vibration analysis,status monitoring,etc.

Working temperature:usually within a certain range,such as-20℃+70℃or-40℃+85℃(storage temperature).

Number of channels:Depending on the specific model and configuration,it may have multiple channels for monitoring the status of multiple devices at the same time.

IV.Application field

BENTLY 3500/25 is widely used in vibration monitoring of various rotating machinery,including but not limited to:

Power generation equipment:generator,steam turbine,etc.

Compressors:air compressors,refrigeration compressors,etc.

Pumps:centrifugal pumps,axial flow pumps,etc.

Fans:fans,blowers,etc.

In addition,it can also be used for monitoring rotating parts in the transportation field,such as ships,airplanes and trains.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500 33 149986-01缩略图

BENTLY 3500 33 149986-01

BENTLY 3500/33 149986-01 is an industrial equipment monitoring and protection module produced by Bently.The following is a detailed introduction to the module:

1.Product Overview

BENTLY 3500/33 149986-01 is a channel relay module or speed monitor dedicated to the monitoring and protection of industrial equipment.It can monitor parameters such as vibration,temperature,pressure,etc.,trigger protection measures,and support data acquisition and remote monitoring to ensure the safe operation of equipment.

2.Main functions

Mechanical equipment monitoring:This module can be used to monitor various parameters of mechanical equipment,such as vibration,temperature,pressure,etc.,which helps to detect abnormal equipment operation status in time.

Mechanical equipment protection:By monitoring the equipment status,the relay module can trigger protection measures,such as cutting off power or taking other emergency shutdown measures to prevent equipment damage or accidents.

 

Vibration monitoring:In the vibration monitoring system,this module can be used to detect when the vibration of the equipment exceeds a predetermined threshold and issue an alarm or perform an action.

Temperature control:The module can be used to monitor the temperature of the equipment and trigger corresponding control and protection measures when the temperature is abnormal.

Data collection and analysis:The module can collect monitored data for real-time analysis,fault diagnosis and maintenance planning.

Remote monitoring and control:Supports remote monitoring and control functions,allowing operators to monitor equipment status and take necessary actions through remote access.

III.Technical specifications

Model:3500/33 149986-01

Brand:Bently

Control principle:Open-loop control principle may be adopted(depending on the application scenario)

Purpose:Industrial equipment monitoring and protection

Origin:United States

Other specifications:May include parameters such as range,accuracy,and applicable temperature

BENTLY 3500 33 149986-01插图

BENTLY 3500 33 149986-01

IV.Application areas

BENTLY 3500/33 149986-01 module is widely used in industrial automation control systems,especially those occasions where mechanical equipment needs to be accurately monitored and protected.For example,it is often used to monitor the speed of key rotating equipment such as generators,pumps,and compressors to prevent equipment failures and extend equipment life.This module also plays an important role in industries such as production line automation,energy,and chemicals.

 

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Back to Top

Search For Products

Product has been added to your cart