NI PXIE-4145缩略图

NI PXIE-4145

PXIE-4145 is a high-performance data acquisition and controller device.The following is a detailed introduction to the product:

1.Product Overview

The PXIE-4145 is a multi-channel data logger and a high-performance,scalable real-time embedded controller designed for industrial automation and test and measurement applications.It integrates a variety of advanced technologies and functions to provide users with efficient and accurate data acquisition and control solutions.

NI PXIE-4145插图

NI PXIE-4145

 

2.Main functions and features

Multi-channel data acquisition:

PXIE-4145 supports multi-channel data acquisition,and each channel has a high sampling rate,which can shorten the measurement time and capture the transient characteristics of the device.

Data Security and Encryption:

The device supports multiple data encryption protocols to ensure the security and integrity of data during collection and transmission,and is very suitable for application environments with high data security requirements.

High-performance embedded controller:

Based on NXP’s i.MX 6ULL​​processor,it is equipped with a variety of high-performance processing units,cache and memory to provide efficient signal processing and data processing capabilities.

Rich I/O and communication interfaces:

PXIE-4145 has rich I/O interfaces and communication interfaces,which can easily connect various sensors,actuators and other devices to realize complex automation control and data acquisition tasks.

High-precision source measure unit(SMU):

As a 4-channel source measure unit,the PXIE-4145 is ideal for high pin count applications,with each channel integrating remote(4-wire)sensing capabilities for accurate measurements.

High-speed sequence engine with SourceAdapt technology:

A high-speed sequencing engine allows users to synchronize all SMUs with other instruments,such as switches or high-speed digital test modules.SourceAdapt technology adjusts the PXIE-4145’s response to any load for optimal response,maximum stability,and minimum transient characteristics.

NI PXIE-4145插图1

NI PXIE-4145

3.Technical specifications

Bus connector:PXI Express

Voltage range:-6V to 6V

DC current range:-500mA to 500mA

Maximum DC power supply:3 watts

Maximum DC absorption power:3 watts

Number of SMU channels:4

Current sensitivity:15pA

Input voltage range:12-48VDC(for data acquisition and controller functions)

Output voltage:5VDC(for data acquisition and controller functions)

Maximum output current:10A(for data acquisition and controller functions)

Efficiency:greater than 90%(for data acquisition and controller functions)

Dimensions:170mm x 105mm x 32mm

Weight:Approx.120g

Operating temperature range:-20°C to+50°C

Storage temperature range:-40°C to+70°C

4.Application fields

PXIE-4145 is widely used in industrial automation,test and measurement,aerospace,defense,electronic manufacturing,energy,transportation and other fields.Its high precision,high performance and versatility make it an important component of data acquisition and control systems in these fields.

 

The company mainly imports PLC modules, programmable controllers, servo control systems and DCS spare parts, such as ABB, AB (Rockwell), GE (General Electric), Bentley, Honeywell, Emerson, Motorola, Invensys, Westinghouse Electric, etc. The company has established close cooperative relationships with many world-renowned PLC and DCS product maintenance service providers. We can directly purchase goods from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply directly from abroad without any middlemen, which reduces the cost of use.

There really is no medium that can make a difference!!

Shenzhen Changxin Automation – Abundant stock, large quantity of现货, quality guaranteed. You can purchase and use with confidence!

If you have any defects or demands for imported PLC and DCS spare parts, please contact our team. We will quickly help you find reliable and high-quality products, shorten the delivery time, and ensure that your equipment operates normally in the appropriate environment. Just in time.

We specialize in providing: Programmable Logic Controller (PLC) control systems, Distributed Control Systems (DCS), Safety Instrumented Systems (SIS), Emergency Shutdown (ESD) systems, vibration monitoring systems, Turbine Compressor Control Systems (CCS), and other PLC modules, various industrial control systems, system modules, CPUs, IO modules, DO modules, AI modules, DI modules, network communication modules, Ethernet modules, motion controllers, analog input modules, analog output modules, digital input modules, digital output modules, module redundancy, power modules, relay output units, relay input units, and processor units.

Our products are widely applied in modern industrial fields such as power, petroleum, mine hoisting, ports, heating, gas supply, water supply, sewage treatment, metallurgy, papermaking, textile, chemical engineering, and water conservancy!

“Power plant DCS monitoring system”

“Manufacturing of Intelligent Flat Plate Tempering Furnace System”

“PLC Programmable Drive Control System”

“DCS Distributed Control System”

5. “Intelligent Fire Water Supply System”

ABB PNI800缩略图

ABB PNI800

ABB PNI800 is a process network interface module designed for ABB 800xA system.The following is a detailed introduction to the product:

1.Main functions

The PNI800 module is mainly used to establish high-speed and reliable communication connections between the ABB 800xA system and other devices or systems to achieve real-time data exchange.It supports multiple communication protocols and can flexibly adapt to various industrial automation application scenarios.

ABB PNI800插图

ABB PNI800

 

2.Technical Features

High-speed communication:PNI800 provides high-bandwidth communication capabilities and supports real-time data transmission,ensuring fast response and efficient collaboration between systems.

Multi-protocol support:The module supports multiple industrial communication protocols,such as Modbus TCP,OPC UA,etc.,making it easy to access various industrial automation systems and achieve seamless flow of information.

High reliability:PNI800 adopts redundant design to ensure the reliability of the system.Even if one communication path fails,communication continuity can be maintained through another path.

Easy to configure:ABB provides a user-friendly configuration tool to simplify the configuration process of PNI800 and reduce the complexity of system deployment and maintenance.

Flexible expansion:PNI800 can be flexibly expanded according to system requirements to meet the needs of future system upgrades and expansions.

3.Application fields

PNI800 is widely used in CNC machinery,metallurgy,oil and gas,petrochemical,chemical industry,paper printing,textile printing and dyeing,machinery,electronic manufacturing,automobile manufacturing,tobacco,plastic machinery,electricity,water conservancy,water treatment/environmental protection,municipal engineering,boiler heating,energy,power transmission and distribution and other fields.In these fields,PNI800,as a process network interface module,plays an important role in connecting various subsystems,realizing data interaction and collaborative control.

ABB PNI800插图1

ABB PNI800

4.Product Advantages

High integration:PNI800 integrates multiple communication protocols and interfaces,reducing the amount and complexity of hardware required for the system.

Stable performance:After rigorous testing and verification,PNI800 has excellent stability and reliability,ensuring long-term stable operation of the system.

Easy to maintain:Friendly configuration tools and simple design make maintenance and troubleshooting of PNI800 more convenient.

 

 

The company mainly imports PLC modules, programmable controllers, servo control systems and DCS spare parts, such as ABB, AB (Rockwell), GE (General Electric), Bentley, Honeywell, Emerson, Motorola, Invensys, Westinghouse Electric, etc. The company has established close cooperative relationships with many world-renowned PLC and DCS product maintenance service providers. We can directly purchase goods from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply directly from abroad without any middlemen, which reduces the cost of use.

There really is no medium that can make a difference!!

Shenzhen Changxin Automation – Abundant stock, large quantity of现货, quality guaranteed. You can purchase and use with confidence!

If you have any defects or demands for imported PLC and DCS spare parts, please contact our team. We will quickly help you find reliable and high-quality products, shorten the delivery time, and ensure that your equipment operates normally in the appropriate environment. Just in time.

We specialize in providing: Programmable Logic Controller (PLC) control systems, Distributed Control Systems (DCS), Safety Instrumented Systems (SIS), Emergency Shutdown (ESD) systems, vibration monitoring systems, Turbine Compressor Control Systems (CCS), and other PLC modules, various industrial control systems, system modules, CPUs, IO modules, DO modules, AI modules, DI modules, network communication modules, Ethernet modules, motion controllers, analog input modules, analog output modules, digital input modules, digital output modules, module redundancy, power modules, relay output units, relay input units, and processor units.

Our products are widely applied in modern industrial fields such as power, petroleum, mine hoisting, ports, heating, gas supply, water supply, sewage treatment, metallurgy, papermaking, textile, chemical engineering, and water conservancy!

“Power plant DCS monitoring system”

“Manufacturing of Intelligent Flat Plate Tempering Furnace System”

“PLC Programmable Drive Control System”

“DCS Distributed Control System”

5. “Intelligent Fire Water Supply System”

WOODWARD 9907-164缩略图

WOODWARD 9907-164

The WOODWARD 9907-164 is part of the microprocessor based 505 and 505E governor control unit.The following is a detailed description of the product:

1.Basic Information

Model:9907-164

Brand:WOODWARD

Series:505/505E series speed controller control unit

2.Technical Specifications

Function:Operate steam turbine,turbogenerator and turboexpander modules

Control module:Digital microprocessor controller

Operation mode:Control the steam turbine by operating the single extraction and/or intake of the steam turbine

WOODWARD 9907-164插图

WOODWARD 9907-164

 

Actuator:Utilizes the turbine’s staged actuator(one or two)to actuate the steam inlet valve

Input/Output:

16 contact inputs(4 dedicated,12 programmable)

6 programmable current inputs(4 to 20 mA)

Display and Control:

The operator control panel on the front of the device can display two lines of text,24 characters per line

Menu driven software controlled and changed by the operator control panel

Standard Features:

Critical speed avoidance

Valve limiter

Automatic start sequence

Stop first out indicator

Communication interface:support Modbus protocol

Physical Specifications:

Dimensions:14″W x 11″H x 4″D

Operating temperature:-4 to+140 degrees Fahrenheit(or-20 to+60 degrees Celsius)

Storage Temperature:-40 to+185 degrees Fahrenheit(or-40 to+85 degrees Celsius)

Input voltage:+24 Vdc,1 A

WOODWARD 9907-164插图1

WOODWARD 9907-164

3.Product Features

High-precision control:Using advanced digital microprocessor technology to achieve precise control of fan speed,load and other parameters.

Rich control functions:including speed control,load control,compressor and turbine start and stop control,etc.,to meet the control requirements under various complex working conditions.

Data collection and monitoring:Capable of collecting and monitoring data related to turbine performance,such as speed,temperature,pressure,etc.,to ensure that the turbine operates within a safe and effective working range.

Self-diagnosis and fault detection:With self-diagnosis function,it can detect turbine faults and issue alarms,thus improving the reliability and safety of the system.

Highly Flexible:As with any 505 speed controller module,the device can be configured and changed in the field by the field operator through menu-driven software integrated into the operator control panel on the front of the device.

 

 

The company mainly imports PLC modules, programmable controllers, servo control systems and DCS spare parts, such as ABB, AB (Rockwell), GE (General Electric), Bentley, Honeywell, Emerson, Motorola, Invensys, Westinghouse Electric, etc. The company has established close cooperative relationships with many world-renowned PLC and DCS product maintenance service providers. We can directly purchase goods from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply directly from abroad without any middlemen, which reduces the cost of use.

There really is no medium that can make a difference!!

Shenzhen Changxin Automation – Abundant stock, large quantity of现货, quality guaranteed. You can purchase and use with confidence!

If you have any defects or demands for imported PLC and DCS spare parts, please contact our team. We will quickly help you find reliable and high-quality products, shorten the delivery time, and ensure that your equipment operates normally in the appropriate environment. Just in time.

We specialize in providing: Programmable Logic Controller (PLC) control systems, Distributed Control Systems (DCS), Safety Instrumented Systems (SIS), Emergency Shutdown (ESD) systems, vibration monitoring systems, Turbine Compressor Control Systems (CCS), and other PLC modules, various industrial control systems, system modules, CPUs, IO modules, DO modules, AI modules, DI modules, network communication modules, Ethernet modules, motion controllers, analog input modules, analog output modules, digital input modules, digital output modules, module redundancy, power modules, relay output units, relay input units, and processor units.

Our products are widely applied in modern industrial fields such as power, petroleum, mine hoisting, ports, heating, gas supply, water supply, sewage treatment, metallurgy, papermaking, textile, chemical engineering, and water conservancy!

“Power plant DCS monitoring system”

“Manufacturing of Intelligent Flat Plate Tempering Furnace System”

“PLC Programmable Drive Control System”

“DCS Distributed Control System”

5. “Intelligent Fire Water Supply System”

MOTOROLA MVME2432缩略图

MOTOROLA MVME2432

MOTOROLA MVME2432 is a high-performance VME bus processor module.The following is a detailed introduction to the product:

1.Product Overview

MOTOROLA MVME2432 is a processor module launched by Motorola Computer Group,designed for high-performance embedded computing applications.Motorola is a long-established multinational electronic communications company whose products enjoy a high reputation worldwide.

MOTOROLA MVME2432插图

MOTOROLA MVME2432

 

2.Hardware Configuration

Processor:MVME2432 is based on PowerPC750(PPC750)processor and is equipped with 333MHz MPC750 CPU,which provides powerful processing capability.

Memory:The module is equipped with 32MB of ECC SDRAM and 2MB of flash memory,ensuring reliable data storage and high-speed data processing.

Expandability:MVME2432 supports bus control and direct memory access,and can perform efficient data communication and data transmission with other devices.At the same time,it also has excellent scalability and can easily add more hardware components to meet changing system requirements.

3.Application fields

Industrial Automation:MVME2432 is widely used in industrial automation,including process control,data acquisition and monitoring systems.It can achieve precise control of the production process and improve production efficiency and product quality by connecting with various sensors and actuators.

Embedded systems:As a core board,MVME2432 provides powerful computing capabilities for various smart devices.It can be applied to various embedded systems such as medical equipment,aerospace equipment,communication equipment,etc.to realize various complex functions and algorithms.

Other fields:Due to its powerful processing capabilities and flexible scalability,MVME2432 may also be used in scientific research,military and other fields to build high-performance computing systems or process complex data tasks.

MOTOROLA MVME2432插图1

MOTOROLA MVME2432

4.Product Features

High performance:Based on the advanced PowerPC750 processor,the MVME2432 provides excellent processing performance to meet the needs of various high-performance embedded computing applications.

High Reliability:Motorola’s products are known for their high reliability,and the MVME2432 is no exception.It uses industrial-grade components and strict quality control standards to ensure the long-term stable operation of the system.

Flexibility:The MVME2432 is designed to be flexible and can be quickly customized for a variety of specific industry applications.At the same time,it also supports multiple operating systems and development environments,allowing developers to flexibly choose the tools and platforms that suit their projects.

 

 

The company mainly imports PLC modules, programmable controllers, servo control systems and DCS spare parts, such as ABB, AB (Rockwell), GE (General Electric), Bentley, Honeywell, Emerson, Motorola, Invensys, Westinghouse Electric, etc. The company has established close cooperative relationships with many world-renowned PLC and DCS product maintenance service providers. We can directly purchase goods from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply directly from abroad without any middlemen, which reduces the cost of use.

There really is no medium that can make a difference!!

Shenzhen Changxin Automation – Abundant stock, large quantity of现货, quality guaranteed. You can purchase and use with confidence!

If you have any defects or demands for imported PLC and DCS spare parts, please contact our team. We will quickly help you find reliable and high-quality products, shorten the delivery time, and ensure that your equipment operates normally in the appropriate environment. Just in time.

We specialize in providing: Programmable Logic Controller (PLC) control systems, Distributed Control Systems (DCS), Safety Instrumented Systems (SIS), Emergency Shutdown (ESD) systems, vibration monitoring systems, Turbine Compressor Control Systems (CCS), and other PLC modules, various industrial control systems, system modules, CPUs, IO modules, DO modules, AI modules, DI modules, network communication modules, Ethernet modules, motion controllers, analog input modules, analog output modules, digital input modules, digital output modules, module redundancy, power modules, relay output units, relay input units, and processor units.

Our products are widely applied in modern industrial fields such as power, petroleum, mine hoisting, ports, heating, gas supply, water supply, sewage treatment, metallurgy, papermaking, textile, chemical engineering, and water conservancy!

“Power plant DCS monitoring system”

“Manufacturing of Intelligent Flat Plate Tempering Furnace System”

“PLC Programmable Drive Control System”

“DCS Distributed Control System”

5. “Intelligent Fire Water Supply System”

A-B 81001-450-53-R缩略图

A-B 81001-450-53-R

A-B 81001-450-53-R is an SCR rectifier module produced by Rockwell Automation,USA.The following is a detailed introduction of the product:

1.Basic Information

Model:81001-450-53-R

Brand:A-B(Rockwell Automation)

Series:SCR Power Modules(Silicon Controlled Rectifier Modules)

A-B 81001-450-53-R插图

A-B 81001-450-53-R

 

2.Technical Specifications

Type:Unidirectional Silicon Controlled Rectifier

Voltage level:600V

Rated current:53A

Peak current:106A

Overload capacity:2 times rated current

On-off time:less than 10μs

Efficiency:greater than 98%

Operating temperature:-40°C to+125°C

Storage temperature:-40°C to+85°C

Housing protection grade:IP67

A-B 81001-450-53-R插图1

A-B 81001-450-53-R

3.Product Features

High reliability:

The use of mature and reliable design and manufacturing processes,including redundant design,high-strength materials and strict quality control,ensures the long-term operational reliability of the module.

It has a complete self-diagnosis function,which can help users quickly find and eliminate faults.

high performance:

High rated current,strong overload capacity and high efficiency.

It can meet demanding application requirements,such as metallurgy,mining,machine tools,textile and chemical industries.

Easy to install:

Small size,light weight and easy installation.

With standard installation dimensions and interfaces,it can be easily installed in various equipment.

Environmental safety:

It complies with the requirements of RoHS Directive and REACH Regulation and does not contain toxic and hazardous substances such as lead and mercury.

Comply with safety standards to ensure safe use by users.

4.Application fields

The A-B 81001-450-53-R SCR rectifier module can be used in a variety of industrial control applications,such as:

Metallurgical industry:used to control electric furnaces,rolling mills and other metallurgical equipment.

Mining industry:used to control mining transportation equipment,hoists and other mining equipment.

Machine tool industry:used to control machine tool spindles,feeds and other machine tool movements.

Textile industry:used to control textile printing and dyeing equipment,textile machinery and other textile equipment.

Chemical industry:used to control chemical pumps,chemical valves and other chemical equipment.

 

 

The company mainly imports PLC modules, programmable controllers, servo control systems and DCS spare parts, such as ABB, AB (Rockwell), GE (General Electric), Bentley, Honeywell, Emerson, Motorola, Invensys, Westinghouse Electric, etc. The company has established close cooperative relationships with many world-renowned PLC and DCS product maintenance service providers. We can directly purchase goods from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply directly from abroad without any middlemen, which reduces the cost of use.

There really is no medium that can make a difference!!

Shenzhen Changxin Automation – Abundant stock, large quantity of现货, quality guaranteed. You can purchase and use with confidence!

If you have any defects or demands for imported PLC and DCS spare parts, please contact our team. We will quickly help you find reliable and high-quality products, shorten the delivery time, and ensure that your equipment operates normally in the appropriate environment. Just in time.

We specialize in providing: Programmable Logic Controller (PLC) control systems, Distributed Control Systems (DCS), Safety Instrumented Systems (SIS), Emergency Shutdown (ESD) systems, vibration monitoring systems, Turbine Compressor Control Systems (CCS), and other PLC modules, various industrial control systems, system modules, CPUs, IO modules, DO modules, AI modules, DI modules, network communication modules, Ethernet modules, motion controllers, analog input modules, analog output modules, digital input modules, digital output modules, module redundancy, power modules, relay output units, relay input units, and processor units.

Our products are widely applied in modern industrial fields such as power, petroleum, mine hoisting, ports, heating, gas supply, water supply, sewage treatment, metallurgy, papermaking, textile, chemical engineering, and water conservancy!

“Power plant DCS monitoring system”

“Manufacturing of Intelligent Flat Plate Tempering Furnace System”

“PLC Programmable Drive Control System”

“DCS Distributed Control System”

5. “Intelligent Fire Water Supply System”

MOTOROLA MVME2434缩略图

MOTOROLA MVME2434

MOTOROLA MVME2434 is a processor module.The following is a detailed introduction to it:

1.Basic Information

Brand:MOTOROLA(later acquired by Freescale Semiconductor,now affiliated with NXP Semiconductors)

Series:MVME series

Type:Embedded Processor Module

Processor architecture:PowerPC

2.Technical Specifications

Processor:PowerPC750 32-bit microprocessor

Cache:32 KB/32 KB L1 cache,1 MB backend L2 cache

Memory:32 MB to 512 MB onboard ECC SDRAM

Bus:Has a Peripheral Component Interconnect(PCI)bus for onboard peripherals,a processor/memory bus to PCI bus bridge,and a VME interface

MOTOROLA MVME2434插图

MOTOROLA MVME2434

 

3.Application fields

MOTOROLA MVME2434 processor module has a wide range of applications in many fields,including but not limited to:

Industrial Automation:used to monitor and control industrial production processes,such as manufacturing,chemical,petrochemical and other fields.

Embedded control systems:Applicable to various embedded control systems,such as machine control,automation equipment,etc.

Data acquisition and processing:Used in data acquisition systems to collect and process sensor data,instrument data,etc.

Communications equipment:In the communications industry,used for the control and data processing of communications equipment.

Test and measurement instruments:Data processing and control of test and measurement instruments in scientific research,laboratories and engineering fields.

Traffic control system:used for traffic signal control,intelligent transportation system,etc.,providing data processing and decision-making capabilities.

Medical equipment:In the medical industry,it is used for the control and data processing of medical equipment,such as medical imaging equipment,laboratory equipment,etc.

Aerospace applications:used for control and data processing in aerospace fields such as flight control systems and navigation systems.

Energy Management:In the energy industry,it is used to monitor and manage energy production and distribution systems.

MOTOROLA MVME2434插图1

MOTOROLA MVME2434

4.Product Features

High performance:It uses a high-performance PowerPC750 microprocessor to provide powerful computing capabilities.

High reliability:Designed with high reliability,suitable for long-term operation in industrial environments.

Flexibility:Fully customizable via two PCI Mezzanine Cards(PMCs)to meet specific application needs.

Multiple interfaces:Equipped with multiple input/output interfaces,such as Ethernet,serial communication,digital input/output,USB port,etc.,to facilitate data exchange with other devices and systems.

 

 

The company mainly imports PLC modules, programmable controllers, servo control systems and DCS spare parts, such as ABB, AB (Rockwell), GE (General Electric), Bentley, Honeywell, Emerson, Motorola, Invensys, Westinghouse Electric, etc. The company has established close cooperative relationships with many world-renowned PLC and DCS product maintenance service providers. We can directly purchase goods from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply directly from abroad without any middlemen, which reduces the cost of use.

There really is no medium that can make a difference!!

Shenzhen Changxin Automation – Abundant stock, large quantity of现货, quality guaranteed. You can purchase and use with confidence!

If you have any defects or demands for imported PLC and DCS spare parts, please contact our team. We will quickly help you find reliable and high-quality products, shorten the delivery time, and ensure that your equipment operates normally in the appropriate environment. Just in time.

We specialize in providing: Programmable Logic Controller (PLC) control systems, Distributed Control Systems (DCS), Safety Instrumented Systems (SIS), Emergency Shutdown (ESD) systems, vibration monitoring systems, Turbine Compressor Control Systems (CCS), and other PLC modules, various industrial control systems, system modules, CPUs, IO modules, DO modules, AI modules, DI modules, network communication modules, Ethernet modules, motion controllers, analog input modules, analog output modules, digital input modules, digital output modules, module redundancy, power modules, relay output units, relay input units, and processor units.

Our products are widely applied in modern industrial fields such as power, petroleum, mine hoisting, ports, heating, gas supply, water supply, sewage treatment, metallurgy, papermaking, textile, chemical engineering, and water conservancy!

“Power plant DCS monitoring system”

“Manufacturing of Intelligent Flat Plate Tempering Furnace System”

“PLC Programmable Drive Control System”

“DCS Distributed Control System”

5. “Intelligent Fire Water Supply System”

ABB 5SHY3545L0010 3BHB013088R0001缩略图

ABB 5SHY3545L0010 3BHB013088R0001

ABB’s 5SHY3545L0010 3BHB013088R0001 is a thyristor(Silicon Controlled Rectifier,SCR)module.The following is a detailed introduction to the product:

1.Product Overview

Type:High-power electrical component,also called thyristor.

Function:In automatic control systems,it can be used as a high-power driver to control high-power equipment with low-power controls.

Application:Widely used in AC and DC motor speed control systems,power regulation systems and follow-up systems.

ABB 5SHY3545L0010 3BHB013088R0001插图

ABB 5SHY3545L0010 3BHB013088R0001

 

2.Product Features

Bidirectional thyristor:This module is a bidirectional thyristor,that is,a three-terminal bidirectional thyristor(TRIAC for short),which has a bidirectional conduction function.

Triggering mode:Its on-off state is determined by the control electrode G.Adding a positive pulse(or negative pulse)to the control electrode G can make it conduct in the forward direction(or reverse direction).There are four triggering modes,including positive triggering in the first quadrant(I+triggering mode),negative triggering in the first quadrant(I-triggering mode),III+triggering mode and III-triggering mode.In actual use,the negative trigger method is more commonly used because it requires smaller trigger voltage and current and works more reliably.

3.Possible technical specifications and parameters(examples,not exact data)

Communication rate:Multiple communication rates may be supported,such as 9.6kBit/s,19.2kBit/s,etc.The specific rate may vary depending on the product version or configuration.

Power supply:Dual power supply redundant input may be used to provide higher power supply reliability and stability.

Protection features:May have features such as overcurrent protection and surge protection to ensure safe operation of the product.

Installation and connection:It can be installed using standard industrial 35mm rails for easy installation and connection.

ABB 5SHY3545L0010 3BHB013088R0001插图1

ABB 5SHY3545L0010 3BHB013088R0001

4.Application fields

Industrial Automation:used to monitor and control industrial processes,including manufacturing,production,assembly and packaging.

Power Systems:In the electric power industry,this may be used for power generation,transmission,and distribution systems to ensure the stability and reliability of the power network.

Building automation:used to control lighting,HVAC,elevators,security systems,and other building equipment.

Transportation Systems:May be used in transportation applications such as traffic signal systems,rail transit systems,and port automation.

Water Treatment:Used to monitor and control water treatment equipment to ensure water quality and environmental compliance.

Pharmaceuticals and Medical Devices:Used in pharmaceutical production and medical device manufacturing to ensure product quality and compliance.

Crude oil and chemicals:used to monitor and control production processes to ensure process safety and efficiency.

Food and Beverage Production:Used to monitor and control food and beverage production lines to ensure product quality and production efficiency.

 

 

 

The company mainly imports PLC modules, programmable controllers, servo control systems and DCS spare parts, such as ABB, AB (Rockwell), GE (General Electric), Bentley, Honeywell, Emerson, Motorola, Invensys, Westinghouse Electric, etc. The company has established close cooperative relationships with many world-renowned PLC and DCS product maintenance service providers. We can directly purchase goods from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply directly from abroad without any middlemen, which reduces the cost of use.

There really is no medium that can make a difference!!

Shenzhen Changxin Automation – Abundant stock, large quantity of现货, quality guaranteed. You can purchase and use with confidence!

If you have any defects or demands for imported PLC and DCS spare parts, please contact our team. We will quickly help you find reliable and high-quality products, shorten the delivery time, and ensure that your equipment operates normally in the appropriate environment. Just in time.

We specialize in providing: Programmable Logic Controller (PLC) control systems, Distributed Control Systems (DCS), Safety Instrumented Systems (SIS), Emergency Shutdown (ESD) systems, vibration monitoring systems, Turbine Compressor Control Systems (CCS), and other PLC modules, various industrial control systems, system modules, CPUs, IO modules, DO modules, AI modules, DI modules, network communication modules, Ethernet modules, motion controllers, analog input modules, analog output modules, digital input modules, digital output modules, module redundancy, power modules, relay output units, relay input units, and processor units.

Our products are widely applied in modern industrial fields such as power, petroleum, mine hoisting, ports, heating, gas supply, water supply, sewage treatment, metallurgy, papermaking, textile, chemical engineering, and water conservancy!

“Power plant DCS monitoring system”

“Manufacturing of Intelligent Flat Plate Tempering Furnace System”

“PLC Programmable Drive Control System”

“DCS Distributed Control System”

5. “Intelligent Fire Water Supply System”

AMAT 0090-76110 VME PCB缩略图

AMAT 0090-76110 VME PCB

AMAT 0090-76110 VME PCB is a high-performance circuit board product.The following is a detailed introduction to it:

1.Basic properties

Model:0090-76110

Brand:AMAT(some information may be produced or supplied by AMAT,but the specific brand ownership may vary due to market or supply chain changes.It is given here based on common information)

Bus standard:VME(VersaModule Eurocard)

2.Technical specifications and characteristics

Line width/spacing:5μm/5μm,which is the basic parameter of circuit board wiring and affects the electrical performance and reliability of the circuit board.

Board thickness:1.6mm,which is the thickness of the circuit board and also affects its mechanical and electrical properties.

AMAT 0090-76110 VME PCB插图

AMAT 0090-76110 VME PCB

Size:200mm x 200mm(another saying is specification 2235,which may refer to different dimensions or packaging sizes.It is given here as common physical dimensions),which indicates the physical size of the circuit board,suitable for specific installation and layout requirements.

Material:FR4,which is a commonly used circuit board material with good electrical properties and mechanical strength.

Surface treatment:immersion gold,which is a commonly used surface treatment method,can improve the welding performance and corrosion resistance of the circuit board.

Application field:It is widely used in semiconductor manufacturing equipment,medical equipment and industrial control,showing its wide range of applications.

Versatility:It has multifunctional characteristics and can meet the needs of different application scenarios.

Quality inspection:It can be tested by flying probe test to ensure that its performance and quality meet the requirements.

AMAT 0090-76110 VME PCB插图1

AMAT 0090-76110 VME PCB

 

3.Application scenarios and advantages

High performance and stability:0090-76110 VME PCB performs well in application scenarios that require high performance and stability,such as semiconductor manufacturing equipment,medical equipment,etc.

Wide compatibility:As a VME bus standard circuit board,it has good compatibility and can be integrated with a variety of devices and systems.

High quality and reliability:Through strict quality inspection and advanced production technology,the high quality and reliability of the circuit board are ensured.

 

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell,Emerson,Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers,and can directly purchase from abroad,providing equipment and spare parts from different countries and manufacturers.

We supply directly from abroad,without middlemen,reducing the cost of use.

There is really no middleman who can make a price difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or need to import PLC,DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening the delivery time to ensure that your equipment can operate normally in the right environment.On time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbine compressor control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,switch input module,switch output module,module redundancy,power supply module,relay output unit,relay input unit,processing unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

GE IS215UCVEM09B缩略图

GE IS215UCVEM09B

GE IS215UCVEM09B is a key component in the Mark VI series control system produced by General Electric(GE).The following is a detailed introduction to the product:

I.Product Overview

GE IS215UCVEM09B is a VME controller card.As an important part of the Mark VI series control system,it is mainly responsible for the core functions of the control system,including I/O processing,communication and human-computer interaction.This module is usually installed in the control cabinet and works with other modules to achieve control of the entire system.

GE IS215UCVEM09B插图

GE IS215UCVEM09B

 

II.Main Features

High-performance processor:IS215UCVEM09B is equipped with a high-performance embedded processor that can handle complex control algorithms and high-speed data communications.

Large-capacity memory:The module has a large-capacity memory for storing programs and data to ensure stable operation and efficient performance of the system.

Multiple interfaces:IS215UCVEM09B provides multiple interfaces such as VME bus,Ethernet,serial port,etc.,which facilitates communication and data exchange with other modules and external devices.

I/O processing capability:The module can process various signals from sensors,actuators and other devices to achieve the acquisition and control of process variables.

Human-machine interaction:IS215UCVEM09B provides a human-machine interface,which is convenient for users to operate and monitor,and improves the ease of use and operability of the system.

3.Application scenarios

GE IS215UCVEM09B is widely used in land and sea aviation derivative control systems,such as control systems for gas turbines,generator sets and other equipment.As the core component of the control system,it can achieve precise control and efficient operation of the equipment,and improve the reliability and stability of the equipment.

GE IS215UCVEM09B插图1

GE IS215UCVEM09B

4.Technical specifications(example)

Brand:GE

Model:IS215UCVEM09B

Series:Mark VI series

Processor:high-performance embedded processor

Memory:large-capacity memory

Interface:VME bus,Ethernet,serial port,etc.

Power supply:stable(specific parameters may vary depending on configuration and application scenarios)

Weight:about 0.8KG

 

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell,Emerson,Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers,and can directly purchase from abroad,providing equipment and spare parts from different countries and manufacturers.

We supply directly from abroad,without middlemen,reducing the cost of use.

There is really no middleman who can make a price difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or need to import PLC,DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening the delivery time to ensure that your equipment can operate normally in the right environment.On time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbine compressor control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,switch input module,switch output module,module redundancy,power supply module,relay output unit,relay input unit,processing unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

MOTOROLA MVME5500缩略图

MOTOROLA MVME5500

MOTOROLA MVME5500 is a powerful single-board computer.Here is a detailed introduction about it:

1.Product Overview

The MVME5500 is the flagship product of Motorola’s VME product line,designed to achieve higher levels of performance in a single VME bus slot.It is widely used in defense,aerospace,industrial automation and transportation,meeting the needs of OEMs for high performance,high reliability and backward compatibility.

2.Main Features

Processor:

The MVME5500 is equipped with an MPC7457 PowerPC processor with a main frequency of 1GHz(another saying is 1.2GHz),providing powerful processing power.

512KB on-chip L2 cache and 2MB L3 cache further improve computing performance.

Equipped with AltiVec coprocessor for high-performance computing applications.

Memory and Storage:

Supports up to 2GB of DDR SDRAM memory(specific configuration may vary depending on the version).

Provides storage options such as IDE hard disk,CF card or CompactFlash card.

MOTOROLA MVME5500插图

MOTOROLA MVME5500

I/O interface:

Dual independent 64-bit PCI bus and PMC site,bus speed up to 66MHz.

Provides Gigabit Ethernet interface and an additional 10/100BaseTX Ethernet interface.

64-bit PCI expansion mezzanine connector,up to four PMC I/O can be added.

Compatible with MVME51xx series,providing a migration path from older boards.

Other features:

Adopts SMART Embedded Computing technology,provides innovative firmware(such as MOTLoad),has interrupt-driven I/O,more comprehensive power-on test and extensive diagnostics and other extended functions.

Supports multiple communication protocols such as Ethernet,CAN bus,RS485,etc.,to achieve fast and stable data exchange and control with host systems and other devices.

Provides 8 analog inputs,8 analog outputs,32 digital inputs and 32 digital outputs(specific configuration may vary depending on the version).

MOTOROLA MVME5500插图1

MOTOROLA MVME5500

III.Application scenarios

MVME5500 is suitable for various industrial automation,process control,data acquisition and military aerospace applications.Its high-performance processor,rich I/O interfaces and support for multiple communication protocols enable it to meet the needs of complex control logic and real-time data processing tasks.

 

 

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell,Emerson,Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers,and can directly purchase from abroad,providing equipment and spare parts from different countries and manufacturers.

We supply directly from abroad,without middlemen,reducing the cost of use.

There is really no middleman who can make a price difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or need to import PLC,DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening the delivery time to ensure that your equipment can operate normally in the right environment.On time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbine compressor control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,switch input module,switch output module,module redundancy,power supply module,relay output unit,relay input unit,processing unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

Back to Top

Search For Products

Product has been added to your cart