Category: Industry trends

BENTLY 3500/92 136180-01 Large Card Product Detailed Description
Product Overview
BENTLY 3500/92 136180-01 is a communication gateway module produced by BENTLY, mainly used to integrate the data of the BENTLY 3500 series monitoring system with other automation systems. It realizes data exchange and interoperability between different systems by providing a rich communication interface.

Main Functions
Data Acquisition: Collect vibration, temperature, pressure and other monitoring data from the BENTLY 3500 system.
Data Conversion: Convert the format of the collected data to meet the needs of different protocols.
Data Transmission: Transmit data to the host computer, PLC or other automation systems through a variety of communication interfaces.
Product Features
Multi-protocol Support: Supports a variety of communication protocols, such as Modbus, Ethernet TCP/IP, etc., which is convenient for integration with various systems.
Flexible Configuration: Different communication parameters and data formats can be realized through software configuration.
High Reliability: Adopts industrial-grade design with high reliability.

Application scenarios
Vibration monitoring system: Integrate vibration monitoring data into DCS or SCADA system to achieve real-time monitoring and alarm.
Condition monitoring system: Integrate equipment status data into asset management system to achieve equipment status evaluation and predictive maintenance.
Process control system: Integrate monitoring data with process control system to achieve closed-loop control.
Technical parameters (typical)
Communication interface: Ethernet TCP/IP, RS232/RS422/RS485
Data rate: Support multiple data rates
Protocol support: Modbus, other custom protocols

ABB SPAJ140C Product Detailed Description
Product Overview
ABB SPAJ140C is a powerful combined overcurrent and ground fault relay, mainly used for the protection of distribution systems. It provides selective short-circuit protection and ground fault protection for radial feeders in directly grounded, resistance-grounded or impedance-grounded power systems.

Main Features
Combined protection: Integrates overcurrent protection and ground fault protection in one device with a compact structure.
Selective protection: It can achieve selective protection of radial feeders to avoid excessive power outage range in case of faults.
Applicable to a variety of grounding systems: Applicable to directly grounded, resistance-grounded or impedance-grounded power systems.
Rich functions: It has a variety of protection functions, such as overcurrent protection, ground fault protection, and voltage loss protection.
Flexible configuration: By setting parameters, it can adapt to different application environments.

Application scenarios
Distribution system: Used to protect distribution lines, transformers and other equipment.
Industrial enterprises: Used to protect the internal distribution system of the factory.
Public facilities: Used to protect the distribution system of public facilities such as hospitals and schools.
Technical parameters (typical)
Rated voltage: Depending on the model, it can support multiple voltage levels.
Rated current: Depending on the model, it can support multiple current levels.
Protection function: Overcurrent protection, ground fault protection, undervoltage protection, etc.
Communication interface: Supports multiple communication protocols to facilitate communication with the host computer.

Schneider C65ND10 Product Detailed Explanation
Product Overview
Schneider C65ND10 is a small circuit breaker, which belongs to the M9 series of products under Schneider Electric. It is mainly used for circuit protection and can protect the circuit from faults such as overload and short circuit. The C65N series products are widely used for their reliability, safety and versatility.

Main Features
Protection function:
Overload protection: When the circuit current exceeds the rated current, the circuit breaker will automatically disconnect to protect the circuit.
Short circuit protection: When a short circuit occurs in the circuit, the circuit breaker will disconnect quickly to prevent equipment damage.
Easy to operate:
Manual operation: The circuit breaker can be opened and closed by manual operation.
Auxiliary contacts: Auxiliary contacts can be connected to achieve remote control or signal feedback.
Flexible installation:
DIN rail installation: Convenient installation in a distribution board or control cabinet.

High reliability:
Adopting high-quality materials and advanced technology, it has high reliability.
Technical parameters (typical)
Rated current: 10A
Rated voltage: 400V AC
Breaking capacity: 6kA
Number of poles: 2P (two poles)
Curve type: C type (suitable for ordinary loads)

GE F650BFBF2G0HIE Product Detailed Introduction
Product Overview
GE F650BFBF2G0HIE is a multifunctional relay produced by General Electric (GE), mainly used for protection, control and automation of power systems. It belongs to the Multilin F650 series, has rich protection functions and flexible configuration capabilities, and is widely used in the power industry.

Main functions
Overcurrent protection: It can detect and respond to overcurrent faults to protect power equipment.
Ground fault protection: It detects and responds to ground faults to ensure system safety.
Voltage and frequency monitoring: It monitors voltage and frequency and provides system operation status information.
Communication function: It supports multiple communication protocols to realize data exchange with the host computer.
Automation function: It can perform complex logic control and realize automatic operation.

Product features
High reliability: It adopts industrial-grade design and is suitable for harsh power environments.
Modular design: It is easy to install and maintain.
Flexible configuration: It can be flexibly configured according to user needs.
Rich protection functions: It provides a variety of protection functions to meet different application needs.
Technical parameters (please refer to the product manual for specific parameters)
Rated voltage: Depends on the specific model
Rated current: Depends on the specific model
Communication interface: Supports multiple communication protocols, such as IEC 61850, Modbus, etc.
Operating temperature: -25℃ ~ +70℃
Protection level: IP20

ABB SR511 Product Details
Product Overview
ABB SR511 is a redundant 5V regulator, mainly used to provide a stable 5V power supply for automation systems such as ABB Advant OCS. It can provide reliable power supply in harsh industrial environments to ensure the normal operation of the system.

Main functions
Redundant power supply: Provides dual power input to improve system reliability.
Voltage stability: Outputs a stable 5V voltage to provide reliable power for sensitive electronic equipment.
Overcurrent protection: With overcurrent protection function to prevent equipment damage.

Modular design: Easy to install and maintain.
Product features
High reliability: Industrial-grade design, suitable for harsh industrial environments.
Modular design: Easy to install and maintain.
Strong compatibility: Compatible with automation systems such as ABB Advant OCS.
Technical parameters (please refer to the product manual for specific parameters)
Input voltage: 18-30V
Output voltage: 5V
Output power: 310W
Operating temperature: 0℃ ~ 55℃
Protection level: IP20

Bently Nevada 3500/15 127610-01 Product Detailed Introduction
Product Overview
Bently Nevada 3500/15 127610-01 is an AC power module produced by Bently Nevada, mainly used to provide power for its series of monitoring systems. This module is usually installed on a rack to provide a stable power supply for various components in the system.

Main Functions
Power Supply: Provides the required AC power for the monitoring system.
Modular Design: Easy to install and maintain.
High Reliability: Industrial-grade design, suitable for harsh industrial environments.
Strong Compatibility: Compatible with Bently Nevada series monitoring systems.

ABB PM783F 3BDH000364R0001 Product Detailed Introduction
Product Overview
ABB PM783F 3BDH000364R0001 is a small PLC controller of the Freelance series produced by ABB. It is usually used in automation applications that require fewer I/O points, such as small machine tools, packaging machinery, etc. The controller has the characteristics of compact design, easy programming and maintenance, and is suitable for various industrial environments.

Main Features
Compact design: Small size, suitable for installation in control cabinets with limited space.
Flexible configuration: A variety of I/O modules can be selected to meet different application requirements.
Easy to program: Supports multiple programming languages, such as ladder diagram, structured text, etc.
High reliability: Adopts industrial-grade design, suitable for harsh industrial environments.
Communication function: Supports multiple communication protocols and can communicate with other devices.
Technical parameters (please refer to the product manual for specific parameters)
Processor type: PowerQUICC

I/O points: Supports up to 300 I/O points
Communication interface: Ethernet, Profibus
Operating temperature: 0℃ ~ 60℃
Protection level: IP20
Application scenarios
Small automation system: Used for small machine tools, packaging machinery, material handling and other automation systems.
Distributed control system: As a sub-controller, it cooperates with the host computer to realize distributed control.
Data acquisition system: Used to collect field data and transmit it to the host computer.

Honeywell TK-PRS021 Product Details
Product Overview
Honeywell TK-PRS021 is a control processor module for the ControlLogix C200 series programmable logic controller (PLC) produced by Honeywell. As the core of the entire control system, it is responsible for executing user-written programs, controlling I/O modules, and realizing various automation functions.

Main Functions
Program Execution: Execute user-written control programs to realize various automation logics.
I/O Control: Control various input and output modules connected to the PLC to realize interaction with external devices.
Communication: Communicate with other devices (such as HMI, host computer, etc.) to realize data exchange and remote monitoring.
Clock Function: Provide real-time clock function for timing control and data recording.
Product Features

High Performance: Adopts high-performance processor with fast instruction execution speed.
Flexible Configuration: Supports a variety of I/O modules and can be flexibly configured according to application requirements.
High Reliability: Adopts industrial-grade design, suitable for harsh industrial environments.
Easy to Program: Supports multiple programming languages, which is convenient for users to program.
Application scenarios
Industrial automation: used in various industrial automation control systems, such as production lines, packaging machinery, etc.
Building automation: used in building automation systems to control air conditioning, lighting and other equipment.
Process control: used in process control systems to control parameters such as temperature and pressure.

REXROTH MHD093C-058-PG1-AA Product Detailed Introduction
Product Overview
REXROTH MHD093C-058-PG1-AA is a high-performance synchronous servo motor produced by Bosch Rexroth. It belongs to the MHD series and is widely used in industrial automation, robotics and other fields to provide precise and efficient motion control.

Main Features
High Precision: Using advanced magnet technology, it has high-precision position and speed control capabilities.
High Torque Density: Small volume and high torque output, suitable for application scenarios with limited space.
High Reliability: Rugged and durable, suitable for harsh industrial environments.
Versatile: A variety of encoders, brakes and other accessories can be selected to meet different application requirements.
Easy to integrate: Seamlessly integrate with Bosch Rexroth’s drives and control systems.

GE IC697BEM711 Product Details
Product Overview
GE IC697BEM711 is a Bus Receiver Module (BRM) for the Series 90-70 PLC system produced by GE Fanuc (now Emerson Automation Solutions). It is mainly used to expand the I/O capacity of the PLC system, allowing multiple racks to be connected together to achieve larger-scale automation control.

Main Functions
Bus Expansion: Connect the main rack with up to 7 expansion racks to expand the number of I/O points.
High-speed data transmission: Data communication between the master and slave racks is achieved through a high-speed parallel bus.
Flexible Configuration: Supports multiple configuration methods to meet different application requirements.

Product Features
High Reliability: Industrial-grade design, suitable for harsh industrial environments.
Modular Design: Easy to install and maintain.
Strong Compatibility: Compatible with GE Fanuc Series 90-70 PLC systems.
Application Scenarios
Large Automation Systems: Used for automation systems that require a large number of I/O points, such as production lines, logistics systems, etc.
Distributed control system: Distribute I/O modules to improve system reliability and flexibility.
Technical parameters
Communication method: High-speed parallel bus
Maximum number of expansion racks: 7
Operating temperature: 0℃ ~ 55℃