GE-VME162PA344SE缩略图

GE-VME162PA344SE

GE-VME162PA344SE插图

GE-VME162PA344SE-

 

产品名称: GE-VME162PA344SE

Product Parameters and Specifications (产品参数和规格):

  • Drive Voltage: AC 110V-220V (驱动电压:交流110V-220V)1
  • Suitable Current: Below 7.0A (适配电流:7.0A以下)1
  • Motor Compatibility: Three-phase hybrid stepping motors with diameters ranging from 86-130mm (适配电机:外径86-130mm的三相混合式步进电机)1
  • Ethernet Communication: Supports Ethernet I/O for signal transmission over IP networks (以太网通信:支持通过IP网络进行信号传输的以太网I/O)2
  • Protocol Support: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, SNTP (协议支持:Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, SNTP)2
  • Power Requirements: Nominal 24 VDC, Minimum 12 VDC, Maximum 48 VDC (电源需求:标称24 VDC,最小12 VDC,最大48 VDC)2
  • Digital Inputs (DI): 8 channels, supporting dry and wet nodes (数字输入:8通道,支持干节点和湿节点)2
  • Digital Outputs (DO): 8 channels, On-state voltage 24 VDC (typical), maximum 200 mA/channel (数字输出:8通道,开态电压24 VDC(典型),最大200 mA/通道)2

Dimensions and Weight (尺寸和重量):

  • Dimensions: 200x156x90 mm³ (尺寸:200x156x90毫米³)1
  • Weight: 1.6 kg (重量:1.6千克)1

Series and Features (系列和特征):

  • Series: Embedded Controller (系列:嵌入式控制器)3
  • Features:
    • Ethernet-based signal transmission (基于以太网的信号传输)2
    • High-speed peer-to-peer I/O (高速点对点I/O)2
    • Supports up to 16 host devices (支持最多16台主机设备)2
    • Remote monitoring via Modbus/TCP (通过Modbus/TCP实现远程监控)2
    • Phase memory function (相位记忆功能)1
    • Smooth low-speed operation with minimal vibration and noise (低速运行平稳,振动和噪音极小)1

Applications (作用):

  • Primarily used in power-related applications such as high-power motor control, inverters, and switching power supplies with high-frequency conversion areas (主要用于与电源相关的应用,如高功率电机控制、逆变器和具有高频转换区域的开关式电源)4
  • As an embedded controller, it can be integrated into various industrial automation systems for logic, motion, drive, and process control (作为嵌入式控制器,它可以集成到各种工业自动化系统中,用于逻辑、运动、驱动和过程控制)5
GE-VME162PA344SE插图1

GE-VME162PA344SE-

GE-VME162PA344SE插图2

GE-VME162PA344SE