Category: Company News

AS-BADU-204

Schneider Electric AS-BADU-204 Analog Input Module

Specifications:

• Manufacturer: Schneider Electric
• Series: Modicon
• Model: AS-BADU-204
• Type: Analog Input Module
• Channels: 4
• Input Type: RTD (Pt100, Pt500)
• Resolution: 12-bit
• Power Supply: 24 VDC

Features:

• Compact Design: Small form factor for space-saving installations.
• High Accuracy: Provides accurate temperature measurements.
• Isolation: Offers galvanic isolation between inputs and outputs for enhanced safety.
• Configuration: Can be configured for various RTD types and ranges.
• Compatibility: Compatible with Modicon PLCs and other Schneider Electric automation systems.

Function:

• Signal Conditioning: Conditions analog signals from RTD temperature sensors.
• Digital Conversion: Converts analog signals into digital values for processing by the PLC.
• Input to PLC: Provides input data to the PLC for monitoring and control purposes.

Applications:

• Temperature Measurement: Used to measure temperature in industrial processes.
• Process Control: Integrated into process control systems to monitor and control temperature-related variables.
• HVAC Systems: Used in HVAC systems for temperature monitoring and control.

Additional Notes:

• Mounting: Typically mounted on a DIN rail.
• Environmental: Designed for industrial environments and can withstand various temperature and humidity conditions.
• Safety: Complies with relevant safety standards.

Important Note:

• Specifics: For exact dimensions, weight, and detailed technical specifications, please refer to the official Schneider Electric product datasheet or contact their technical support.

To find more detailed information, please refer to these resources:

• Schneider Electric: [https://www.se.com/us/en/product/ASBADU204/module-badu-204/]
• Radwell: [https://www.radwell.com/Buy/SCHNEIDER%20ELECTRIC/MODICON/AS-BADU-204]
• Classic Automation: [https://www.classicautomation.com/Part/as-badu-204]

Please note that while I have provided a general overview of the AS-BADU-204, specific details may vary depending on the exact configuration and application.

Would you like me to provide more information on a specific aspect of this product, such as its installation, compatibility with other devices, or troubleshooting tips?

AS-BADU-204

AS-BADU-204

A201SR04 01A201S12 5880-0009

A201SR04 01A201S12 5880-0009 Module

Potential Specifications (Based on General Assumptions):

• Manufacturer: The manufacturer could be inferred from the model number (e.g., the first few digits might indicate the company). However, without more context, it’s difficult to pinpoint the exact manufacturer.
• Series: A201SR04 might indicate a specific series of modules produced by the manufacturer.
• Model: 01A201S12 could represent a particular model within the series, possibly indicating specific features or configurations.
• Type: Based on the model number and common industrial automation practices, this module is likely an input/output (I/O) module.
• Function: I/O modules are used to interface between a control system (like a PLC) and external devices or sensors. They can handle both digital and analog signals.
• Features:
  • Number of Inputs/Outputs: This would depend on the specific model but could range from a few to dozens.
  • Signal Types: Could handle digital (on/off) or analog (continuous) signals.
  • Voltage: The module might have specific voltage requirements for operation.
  • Isolation: Some modules may have isolation between inputs and outputs for safety and noise reduction.
  • Communication: The module might use a specific communication protocol to interface with the control system.

Potential Parameters and Specifications:

• Dimensions: The physical size of the module, including height, width, and depth.
• Weight: The weight of the module.
• Mounting: The method for mounting the module in a control panel or rack.
• Environmental: Operating temperature range, humidity tolerance, and other environmental factors.
• Electrical: Voltage requirements, current consumption, and connector types.
• Safety: Safety certifications and ratings.

Potential Applications:

• Industrial Automation: Used in various industrial processes to monitor and control equipment.
• Machine Control: Used in machinery to control motors, valves, and other devices.
• Process Control: Used in process industries to monitor and control process variables.

To Obtain More Accurate Information:

• Contact the Manufacturer: Reach out to the manufacturer with the exact model number to get a detailed datasheet.
• Check Online Databases: Search for the model number on industrial automation equipment databases or marketplaces.
• Consult with a System Integrator: If you are working on a specific project, a system integrator can provide guidance and access to more detailed information.

Additional Tips:

• Look for a Data Sheet: The manufacturer’s datasheet will provide the most comprehensive information about the module.
• Check for Documentation: Any accompanying documentation, such as installation manuals or user guides, can provide valuable insights.
• Search Online Forums: Online forums and communities related to industrial automation might have discussions or posts about this specific module.

Remember to replace the placeholders in the above information with the actual values provided in the datasheet once you obtain it.

A201SR04 01A201S12 5880-0009

A201SR04 01A201S12 5880-0009

A201SR04 01A201S12 5880-0009

6410-024-N-N-N

Pacific Scientific 6410-024-N-N-N Stepper Motor Driver

Specifications:

• Manufacturer: Pacific Scientific Motion Control (now part of Danaher Motion)
• Series: 6410
• Model: 6410-024-N-N-N
• Type: Stepper Motor Driver
• Power Level: 7.1 A peak, 5 A rms
• Voltage: 24-75 VDC

Features:

• High Performance: Delivers high torque and speed for demanding applications.
• Microstepping: Supports microstepping for smoother motion and reduced noise.
• Customization: Factory-assigned customization number allows for specific configuration options.
• Reliability: Designed for robust operation in industrial environments.
• Compatibility: Compatible with various stepper motors.

Function:

• Motor Control: Drives stepper motors to precise positions.
• Current Regulation: Provides regulated current to the motor for optimal performance.
• Microstepping: Enables finer motor control and smoother motion.
• Protection: Includes built-in protection features such as overcurrent and overvoltage protection.

Applications:

• X-Y Tables and Slides: Used in precision positioning systems.
• Packaging Systems: Employed in automated packaging lines.
• Labeling Machines: Utilized for accurate label placement.
• Robot Machinery: Integrated into robotic systems for precise movements.

Additional Notes:

• Customization Options: The “N-N-N” portion of the model number indicates factory-assigned customization options, which may include specific voltage ranges, microstepping resolutions, and other features.
• Mounting: Typically mounted on a heat sink to dissipate heat.
• Cooling: Forced air cooling may be required for high-power applications.

For more detailed information, please refer to the official product datasheet available on the Pacific Scientific or Danaher Motion website.

Additional Resources:

• Wake Industrial: https://www.wakeindustrial.com/buy/pacific-scientific/6410-series/6410-024-n-n-n
• eBay: https://www.ebay.com/itm/173958732043
• Radwell: [移除了无效网址]

Please note that while I have provided a general overview of the 6410-024-N-N-N, specific details may vary depending on the exact configuration and customization options.

Would you like me to provide more information on a specific aspect of this product, such as its customization options, installation guidelines, or troubleshooting tips?

6410-024-N-N-N

6410-024-N-N-N

6410-024-N-N-N (2)

05701-A-0302

Honeywell 05701-A-0302 Single Channel Control Card, Catalytic

Specifications:

• Manufacturer: Honeywell Analytics
• Series: System 57
• Model: 05701-A-0302
• Type: Single Channel Control Card, Catalytic
• Function: Controls a single gas sensor channel

Features:

• Catalytic Sensing: Specifically designed for catalytic gas sensors.
• Single Channel: Controls one gas sensor channel.
• Analog Output: Provides an analog output signal for further processing or display.
• Configuration: Configurable for various gas types and ranges.
• Compatibility: Compatible with Honeywell System 57 gas detection systems.

Function:

• Sensor Control: Provides power and control signals to the connected gas sensor.
• Signal Conditioning: Conditions the sensor signal for accurate measurement.
• Analog Output: Generates an analog output signal proportional to the gas concentration.
• Alarm Functions: Can be configured to trigger alarms based on gas concentration levels.

Additional Notes:

• Applications: Commonly used in industrial, commercial, and residential gas detection systems.
• Compatibility: Compatible with various Honeywell gas sensors.
• Installation: Typically installed within a Honeywell System 57 control panel.

Important Note:

• Specifics: For exact dimensions, weight, and detailed technical specifications, please refer to the official Honeywell product datasheet or contact their technical support.

To find more detailed information, please refer to these resources:

• Honeywell Product Page: https://www.quicktimeonline.com/05701-a-0302
• JJS Tech: https://www.quicktimeonline.com/05701-a-0302
• eBay: https://www.ebay.com/itm/234155568301

Please note that while I have provided a general overview of the 05701-A-0302, specific details may vary depending on the exact configuration and application.

Would you like me to provide more information on a specific aspect of this product, such as its installation, compatibility with other devices, or troubleshooting tips?

05701-A-0302

05701-A-0302

216DB61 HESG324063R0100 HESG216882A

Product: 216DB61 HESG324063R0100 HESG216882A (ABB)

Specifications:

• Manufacturer: ABB
• Series: [Specify the series based on the datasheet]
• Model: HESG324063R0100 (specific model within the series)
• Version: HESG216882A (indicating a revision or update)

Dimensions and Weight:

• Length: [Provide a specific measurement in millimeters or inches]
• Width: [Provide a specific measurement in millimeters or inches]
• Height: [Provide a specific measurement in millimeters or inches]
• Weight: [Provide a specific measurement in kilograms or pounds]

Features:

• [Feature 1]: [Describe the feature, e.g., number of inputs/outputs, type of inputs/outputs, communication protocols]
• [Feature 2]: [Describe the feature, e.g., mounting options, safety certifications, environmental ratings]
• [Feature 3]: [Describe the feature, e.g., diagnostic capabilities, configuration options]

Function:

• [Describe the primary function of the product. Possible functions include:]
• Interfacing with field devices
• Providing digital or analog input/output signals
• Communicating with a PLC or other control system
• [Specific function based on the product, e.g., motor control, process control, safety function]

Additional Notes:

• [Note 1]: [Include any other relevant information, e.g., operating temperature range, voltage requirements, environmental conditions]
• [Note 2]: [Include any specific applications or industries where this product is commonly used]

To obtain the most accurate and up-to-date information, I strongly recommend that you:

1. Refer to the Product Datasheet: ABB provides detailed datasheets for all their products. The datasheet will contain the exact specifications, dimensions, and performance characteristics.
2. Contact ABB Support: If you cannot find the datasheet or have further questions, contact ABB’s customer support. They can provide you with the specific information you need.

Possible Product Categories (based on the model number):

• I/O Module: This is a common interpretation given the combination of letters and numbers. It would be used to connect field devices to a PLC or other control system.
• Drive Module: It could also be a component of a variable frequency drive or motor control system.
• Communication Module: It might be a communication module used for networking different devices in an automation system.

Please provide more context or information, such as:

• Where did you find this model number?
• What kind of system is it used in?
• What are you trying to achieve with this information?

With more details, I can provide a more specific and helpful response.

I’ve noticed that you’ve asked for an English response, so I’ve provided it in English. If you would like me to provide a response in a different language, please let me know.

Would you like me to try and locate the datasheet for this specific ABB product?

Note: I cannot provide specific technical details or measurements without having access to the official product datasheet. The information provided above is a general overview based on common ABB product naming conventions and functions.

216DB61 HESG324063R0100 HESG216882A

216DB61 HESG324063R0100 HESG216882A

216DB61 HESG324063R0100 HESG216882A

60M100-00

Product: 60M100-00

Based on the assumption that this is a Bently Nevada 60M100 Condition Monitoring System, here’s a breakdown of its potential specifications:

Specifications:

• Series: 60M100
• Model: 60M100-00 (specific model within the 60M100 series)
• Type: Condition Monitoring System

Dimensions and Weight:

• Dimensions: [Please refer to the product datasheet for exact dimensions. Typical dimensions for this type of equipment vary depending on specific configurations.]
• Weight: [Please refer to the product datasheet for exact weight. Factors such as additional modules or accessories can affect the overall weight.]

Features:

• Continuous Monitoring: Provides real-time monitoring of rotating machinery.
• Signal Processing: Employs advanced signal processing algorithms for accurate data analysis.
• Alarm Management: Generates alerts for abnormal conditions or potential failures.
• Data Acquisition: Collects data from various sensors and transducers.
• Trend Analysis: Tracks changes in machine health over time.
• Diagnostic Capabilities: Identifies the root cause of equipment failures.
• Modularity: Can be configured with different modules to suit specific applications.
• Connectivity: Supports various communication protocols for integration with other systems.

Function:

• Condition Monitoring: The primary function of the 60M100 is to monitor the condition of rotating machinery such as turbines, generators, and pumps. By analyzing vibration, temperature, and other parameters, it helps to detect potential failures before they occur, preventing costly downtime and improving overall equipment reliability.
• Predictive Maintenance: The system enables predictive maintenance strategies by providing early warning signs of impending failures, allowing for planned maintenance activities.

Additional Notes:

• Applications: Commonly used in power generation, oil and gas, and industrial manufacturing.
• Benefits: Improved equipment reliability, reduced maintenance costs, increased safety, and extended equipment life.

Please note that the specific features and capabilities of the 60M100-00 may vary depending on the exact configuration and options selected.

To obtain more accurate and detailed information, please refer to the following resources:

• Product datasheet: The datasheet provides comprehensive technical specifications and information about the product.
• Manufacturer’s website: The Bently Nevada website (or the website of the specific manufacturer) offers detailed product information, documentation, and support resources.

If you have any further questions or require more specific information, please feel free to provide additional details such as:

• Industry or application: Where is this product used?
• Specific features: Are you interested in any particular features or capabilities?
• Manufacturer: Do you know the manufacturer of this product?

I’ll do my best to assist you further.

60M100-00

60M100-00

60M100-00

60M100-00 (2)