Category: Company News

ABB REF601 CE446BB1NH Product Details, Specifications, and Parameters:

Product Overview:
ABB REF601 CE446BB1NH is a feeder protection relay produced by ABB. It is specifically designed to protect and control utility and industrial power systems in both primary and secondary distribution networks¹.

Specifications:

• Protection Functions: REF601 CE446BB1NH offers a wide range of protection functions, including overcurrent, overload, short-circuit, grounding, and differential protection¹².

• 

  ABB REF601 CE446BB1NH

• Measurement Functions: The relay also has the capability to measure voltage, current, power, and energy¹².
• Control Functions: Functions such as circuit breaker control, reclosing control, and load control are also supported¹².
• Communication Interfaces: REF601 CE446BB1NH is equipped with communication interfaces like RS-232, RS-485, and Ethernet, enabling communication with other control systems, SCADA systems, or remote monitoring systems¹².
• Operating Temperature Range: The relay can operate within a temperature range of -40°C to 85°C².
• Storage Temperature Range: The storage temperature range is -55°C to 125°C².
• Humidity: It can operate in a humidity range of 5% to 95% (non-condensing)².
• Protection Level: IP65².
• Dimensions: 483 mm x 305 mm x 210 mm².
• Weight: 25 kg².

Parameters:

• Rated Voltage: 1 kV to 36 kV².
• Rated Current: 1 A to 6000 A².

• 

  ABB REF601 CE446BB1NH

Features:

• Multifunctionality: REF601 CE446BB1NH offers various protection, measurement, and control functions¹².
• Digital Control: It utilizes digital technology for high precision and programmability¹.
• Communication Capabilities: Enables data exchange and communication with other systems¹.
• Compact Design: The relay’s compact design allows for easy installation and configuration¹.
• Programmable Logic: Users can customize protection parameters and logic to suit different power system configurations and requirements¹³.
• Event Recording: Helps with analysis and troubleshooting by recording abnormal events and fault information³.

Please note that the specifications and parameters may vary slightly depending on the specific application and regional standards. It is recommended to consult ABB’s official documentation for the most accurate and up-to-date information.

ABB-REX010-HESG324426R0001-HESG324389

Product Model:
ABB-REX010-HESG324426R0001-HESG324389

Product Parameters:

• Encoder Type: Incremental Encoder¹
• Resolution: 2500 PPR (Pulses Per Revolution)¹

• 

  ABB-REX010-HESG324426R0001-HESG324389

• Pulse Frequency: Up to 1 MHz¹
• Power Supply Voltage: 24 VDC²
• Operating Temperature: -25℃ to +70℃¹

Product Specifications:

• High Accuracy: Uses high-precision optical encoding technology for accurate and reliable measurement data¹
• High Reliability: Uses quality components and advanced design techniques for stable and reliable operation¹
• Low Power Consumption: Saves energy with its low-power design¹
• Easy Installation: Standard dimensions and interfaces facilitate installation and usage¹

Dimensions:
50 mm x 50 mm x 25 mm¹

Weight:
200 g¹

Features:

• Compact design to save space
• Compatible with various industrial control systems and devices¹
• Provides position, speed, and acceleration information¹
• Uses advanced optical encoding and digital signal processing techniques¹

Functions:

• Converts rotary motion into electrical signals¹
• Supplies information such as position, speed, and acceleration for control and measurement applications¹

• 

  ABB-REX010-HESG324426R0001-HESG324389

Application Areas:

• Industrial automation¹
• Machinery control and monitoring¹
• Robotics¹
• Positioning systems¹
• Other applications requiring precise rotary motion measurement and control¹

Please note that the information provided is based on the currently available search results and may be subject to change or updates by ABB. For the most accurate and up-to-date information, please refer to ABB’s official documentation or contact their technical support.

Product Model:
ABB-GVC736CE101-3BHE039203R0101-5SXE12-0184

Product Parameters:

• Voltage Rating: This will depend on the specific type of GVC breaker but is typically in the range of 12-40.5 kV.
• Current Rating: Similarly, the current rating will vary based on the breaker model and voltage class.

• 

  GVC736CE101-3BHE039203R0101-5SXE12-0184

• Short-Circuit Current Rating (Icu): Specifies the maximum fault current that the breaker can interrupt under short-circuit conditions.
• Rated Operational Current (In): Continuous current rating of the breaker.
• Tripping Times: For overcurrent, short-circuit, and ground fault conditions.

Product Specifications:

• Dimensions: Not specifically provided without a detailed datasheet. Dimensions will vary depending on the voltage class and breaker rating.
• Weight: Not specifically provided without a detailed datasheet. Weight will vary depending on the breaker rating and accessories.

• 

  GVC736CE101-3BHE039203R0101-5SXE12-0184

• Pole Configuration: Likely three-pole configuration based on the model number¹.
• Operating Mechanism: Spring-charged or motor-operated, depending on the specific model.

Features:

• Arc Extinction: Designed for effective arc extinction to protect equipment and personnel.
• High Interrupting Capacity: Able to handle high fault currents.
• Compact Design: Allows for installation in confined spaces.
• Adjustable Settings: Overcurrent, short-circuit, and ground fault trip thresholds are adjustable.
• Auxiliary Contacts: For signaling and interlocking.

Functions:

• Protection: Interrupts fault currents to protect downstream equipment from damage.
• Isolation: Provides isolation of equipment for maintenance and repair.
• Control: Can be integrated into automatic control systems for remote operation.

Application Areas:

• Power Distribution: Used in medium-voltage power distribution systems to protect equipment from fault currents.
• Industrial Applications: Suitable for use in factories, mines, and other industrial environments.
• Utilities: Used by electric utilities to protect transformers, motors, and other equipment¹.
• Infrastructure: Found in substations, switchgear, and other electrical infrastructure.

Please note that the above information is generic and may not be entirely accurate for the specific model number provided. It is recommended to consult ABB’s official documentation or contact ABB’s technical support for detailed specifications and parameters of the ABB-GVC736CE101-3BHE039203R0101-5SXE12-0184 breaker.

Product Model:
CI857K01-3BSE018144R1

Product Parameters:

The exact parameters for this model are not widely available, but it appears to be a component from ABB’s control and instrumentation product line. Some common parameters for such components may include:

• Voltage Range

• 

  CI857K01–3BSE018144R1

• Current Rating
• Operating Temperature Range
• Protection Ratings (IP Ratings)

However, these would need to be confirmed from ABB’s official documentation.

Product Specifications:
The specifications for this model would typically include:

• Physical dimensions
• Electrical characteristics
• Environmental ratings
• Compliance with industry standards

Again, these specifications would need to be sourced from ABB’s official documentation.

Dimensions:
The dimensions of this product are not publicly available. You would need to consult ABB’s product catalog or datasheets for accurate dimensions.

CI857K01–3BSE018144R1

Weight:
The weight of this product is also not publicly available. You would need to consult ABB’s product catalog or datasheets for the weight.

Features:
General features of ABB’s components include:

• High reliability
• Long service life
• Compact design
• Easy installation and maintenance
• Compliance with industry standards

However, the specific features of the CI857K01-3BSE018144R1 model would need to be confirmed from ABB’s official documentation.

Functions:
The exact function of this model is not clear from the model number alone. However, based on the naming convention, it seems to be a part of ABB’s automation and control system components. It could be a module, interface card, or another type of component used in industrial automation and control systems.

Application Areas:
ABB’s components are widely used in various industrial applications, including:

• Manufacturing automation
• Process control
• Power generation and distribution
• Transportation systems
• Infrastructure management

The specific application areas for the CI857K01-3BSE018144R1 model would depend on its function and capabilities. You would need to consult ABB’s official documentation or contact their technical support for more information.

ABB-5SHY4045L0004

Product Model:
5SHY4045L0004

Product Parameters:

• Rated Voltage: 380V-400V¹²³
• Rated Current: 45A¹²³
• Short-time Tolerant Current: 1.5kA¹²³

• 

  5SHY4045L0004-(1)

Product Specifications:

• SPT (Soft Punch Through) Chipset: Provides high output power and rated current due to moderate chipping and larger chip area¹³⁴.
• High-temperature Operation Capability: The 1700 V SPT++ chipset operates at temperatures up to 175°C³⁴.
• Easy Expansion: Simple scalability via EtherCAT (FSoE) with 30 fault-safe inputs or outputs³.

Dimensions:

• Length: 450mm
• Width: 250mm
• Height: 300mm²³

Weight:
15kg²³

Features:

• High Reliability: Stable performance in various industrial applications²³.
• Long Mechanical Life: Up to 1,000,000 operations²³.
• Protection Functions: Includes overload, short circuit, undervoltage, etc.¹²³.
• Communication Interface: For data exchange and remote monitoring with control systems¹.

• 

  5SHY4045L0004-(1)

Functions:

• Power Control: Provides precise control of electricity to regulate device power¹.
• Adjustable Voltage and Current: Allows for the adjustment of output voltage and current to meet the requirements of different devices and systems¹.
• Protection Against Overcurrent and Overheating: Ensures the safety of equipment¹³.

Application Areas:

• Industrial Power Conversion and Drives: Such as traction, wind turbine converters, or other renewable energy sources³.
• Power Systems: For FACTS (Flexible AC Transmission Systems) applications¹³.
• Renewable Energy: Solar power converters, battery power converters³⁴.
• Transportation: Electric vehicles, rail transportation⁵.
• Industrial Automation: Logic control, process control, motion control, data processing².

Please note that the information provided is based on the current search results and may be subject to change. It is recommended to consult the official ABB documentation or contact ABB’s technical support for the most accurate and up-to-date information.

ABB-5SHY3545L0020

Product Model:
5SHY3545L0020 (This seems to be a part of an Integrated Gate-Commutated Thyristor (IGCT) module series.)

ABB-5SHY3545L0020

Product Parameters:
Exact parameters would depend on the specific model and configuration. However, typically for IGCT modules, parameters may include:

• Rated Voltage
• Rated Current
• Peak Forward Current
• On-state Voltage Drop
• Gate Trigger Current
• Operating Temperature Range

• 

  ABB-5SHY3545L0020

Product Specifications:
Detailed specifications would need to be sourced from ABB’s official documentation for the specific model. However, generally, IGCT modules offer high-power capabilities, fast switching speeds, and robust designs for demanding industrial applications.

Dimensions:
The exact dimensions of the ABB-5SHY3545L0020 would be specified in the product’s datasheet or technical manual. These dimensions typically include the length, width, and height of the module.

Weight:
The weight of the ABB-5SHY3545L0020 module would also be specified in the datasheet or technical manual.

Features:

• High power handling capabilities
• Fast switching speeds
• Robust and reliable design
• Low on-state voltage drop
• Advanced protection features
• Compliant with industry standards

Functions:
IGCT modules are used for power conversion and control in high-power electrical systems. They are designed to handle large currents and voltages and provide precise and reliable switching performance. The ABB-5SHY3545L0020, as part of an IGCT module series, likely performs similar functions.

Application Areas:
IGCT modules are commonly used in industrial applications that require high-power conversion and control, such as:

• Power electronics systems
• High-voltage direct current (HVDC) transmission
• Motor drives
• Renewable energy systems (e.g., wind turbines, solar inverters)
• Industrial drives and automation systems

Please note that the information provided above is general and may not be entirely accurate for the specific ABB-5SHY3545L0020 model. It is recommended to consult ABB’s official documentation or contact their technical support for detailed and accurate information.

ABB-3BHE042816R0101-PCD244A101

Product Model: PCD244A101 (or it might be part of a larger system/assembly identified by the full part number ABB-3BHE042816R0101-PCD244A101)

Product Parameters: (Exact parameters would depend on the specific application and configuration, but typically for an ABB controller or module, it could include:

• Input voltage range
• Output voltage/current ratings
• Communication protocols supported

• 

  ABB-3BHE042816R0101-PCD244A101

• Memory capacity
• Operating temperature range

Product Specifications:

• Technical details specific to the PCD244A101 module, including its performance characteristics, compliance with standards, and environmental ratings.

Dimensions:

• Physical size of the module or assembly, typically provided in millimeters (mm) or inches (in), including height, width, and depth.

Weight:

• Mass of the product, typically given in kilograms (kg) or pounds (lb).

Features:

• Unique capabilities and characteristics of the PCD244A101 module, such as:
• High-speed processing
• Programmable logic
• Integrated communication interfaces
• Ruggedized design for harsh environments

Functions:

• The tasks and operations the PCD244A101 module performs, including:
• Data acquisition
• Control logic execution
• 
• Communication with other devices
• Interface with human-machine interfaces (HMI)

Application Areas:

• Industries or specific use cases where the PCD244A101 module is commonly deployed, such as:
• Industrial automation
• Manufacturing
• Process control
• Energy management

Please note that the above details are general descriptions based on the typical characteristics of ABB modules. For specific and accurate information on ABB-3BHE042816R0101-PCD244A101, it is recommended to consult the official ABB documentation, datasheets, or contact ABB’s technical support team.