05701-A-0302缩略图

05701-A-0302

05701-A-0302插图

05701-A-0302

The Honeywell 05701-A-0302 is a single-channel gas detection controller that is part of the Honeywell System 57 family of gas detection products. It is designed to monitor a single gas hazard and provide alarm outputs if the gas concentration exceeds preset alarm levels.

Parameters:

  • Gas Type: Various gas types available, including carbon monoxide (CO), hydrogen sulfide (H2S), nitrogen dioxide (NO2), oxygen (O2), methane (CH4), and propane (C3H8)
  • Detection Range: Dependent on gas type, typically 0-250 ppm for CO, 0-50 ppm for H2S, 0-10 ppm for NO2, 0-25% vol. for O2, 0-100% LEL for CH4 and C3H8
  • Alarm Levels: Two configurable alarm levels (Alarm A and Alarm B)
  • Output Relays: Two DPDT output relays with 5A @ 250Vac or 5A @ 30Vdc switching capacity
  • Communication: 4-20mA analog output for gas concentration
  • Power Supply: 24 VDC or 120 VAC
  • Power Consumption: Approximately 15 W
  • Operating Temperature: -40°C to +50°C (-40°F to +122°F)
  • Storage Temperature: -40°C to +70°C (-40°F to +158°F)
  • Humidity: 5% to 95% RH non-condensing
  • Vibration: 0.5 g RMS, 5 to 500 Hz
  • Shock: 5 g, 22 ms half-sine pulse
  • EMC: Meets IEC 61000-4-2, IEC 61000-4-3, and IEC 61000-4-6 standards
  • Safety: Meets UL 61010-1, CSA C22.2 No. 61010-1, FCC part 15, ICES-003 issue 4, and ISO 9001-2008 certifications

Specifications:

  • Single-Channel Gas Detection Controller: Monitors a single gas hazard and provides alarm outputs
  • Catalytic or Electrochemical Sensor: Utilizes a catalytic or electrochemical sensor for reliable gas detection
  • Two-Stage Alarm System: Provides two configurable alarm levels for early warning and critical event notification
  • DPDT Output Relays: Offers versatile control capabilities for activating alarms, ventilation systems, or other safety devices
  • 4-20mA Analog Output: Enables continuous monitoring and data logging of gas concentrations
  • Rugged Construction: Withstands harsh environments and extreme temperatures
  • Safety Certifications: Meets industry safety standards for hazardous environments

Dimensions:

  • Height: 140 mm (5.51 in)
  • Width: 170 mm (6.69 in)
  • Depth: 64 mm (2.52 in)

Weight:

  • Approximately 1.2 kg (2.65 lb)
  • 05701-A-0302插图1

    05701-A-0302

Series:

  • Honeywell System 57

Features:

  • Reliable gas detection: Utilizes proven sensor technology for accurate and dependable gas detection
  • Two-stage alarm system: Provides early warning and critical event notification to prevent hazardous situations
  • Versatile output relays: Enables control of alarms, ventilation systems, and other safety devices
  • Continuous monitoring: Offers 4-20mA analog output for real-time gas concentration monitoring
  • Rugged construction: Withstands harsh environments and extreme temperatures
  • Safety certifications: Meets industry safety standards for hazardous environments

Function:

The Honeywell 05701-A-0302 single-channel gas detection controller is a crucial component of gas detection systems in various industrial and commercial settings. It effectively monitors a single gas hazard and triggers alarms when gas concentrations exceed preset levels, safeguarding personnel and preventing potential hazards.

The controller’s catalytic or electrochemical sensor ensures reliable gas detection, accurately identifying the presence of the target gas. Its two-stage alarm system provides early warning (Alarm A) and critical event notification (Alarm B), enabling timely intervention and evacuation procedures.

DPDT output relays offer versatility in controlling alarms, ventilation systems, and other safety devices, ensuring prompt response to potential gas hazards. The 4-20mA analog output facilitates continuous monitoring of gas concentrations, allowing for data logging and trend analysis.

The controller’s rugged construction withstands harsh environments and extreme temperatures, making it suitable for various industrial applications. Its compliance

 

 

05701-A-0302插图2

05701-A-0302

5501-470缩略图

5501-470

5501-470插图

 

Sure, here is the information on the Woodward 5501-470 Programmable Logic Controller (PLC):

Parameters:

  • Processor: 32-bit RISC processor
  • Memory: 256 KB of RAM, 512 KB of flash memory
  • I/O Capacity: Up to 256 I/O points
  • Communication Ports: 1 RS-232 port, 1 Ethernet port
  • Expansion Ports: 2 expansion ports
  • Power Supply: 24 VDC or 120 VAC
  • Power Consumption: Approximately 25 W
  • Operating Temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage Temperature: -40°C to +85°C (-40°F to +185°F)
  • Humidity: 5% to 95% RH non-condensing
  • Vibration: 0.5 g RMS, 5 to 500 Hz
  • Shock: 5 g, 22 ms half-sine pulse
  • EMC: Meets IEC 61000-4-2, IEC 61000-4-3, and IEC 61000-4-6 standards
  • Safety: Meets UL 508, CSA C22.2 No. 142, and CE standards

Specifications:

  • Programmable Logic Controller (PLC): Controls and automates industrial processes
  • 32-bit RISC Processor: Provides high-performance processing power for demanding applications
  • Scalable I/O Capacity: Supports up to 256 I/O points to meet the needs of a variety of applications
  • Multiple Communication Ports: Enables communication with other devices and systems
  • Expansion Ports: Allows for future expansion of I/O and communication capabilities
  • Diagnostic LEDs: Provides status information about the PLC, including power, I/O, and communication
  • Terminal Block Connection: Offers simple and secure connection to I/O devices and communication networks

Dimensions:

  • Height: 114 mm (4.50 in)
  • Width: 165 mm (6.50 in)
  • Depth: 22.5 mm (0.89 in)

Weight:

  • Approximately 0.4 kg (0.88 lb)

Series:

  • Woodward 5501 Series

Features:

  • High-performance 32-bit RISC processor: Provides powerful processing capabilities for demanding applications
  • Scalable I/O capacity: Supports up to 256 I/O points to meet the needs of a wide range of applications
  • Multiple communication ports: Enables communication with a variety of devices and systems, including HMI panels, SCADA systems, and other PLCs
  • Expansion ports: Allows for future expansion of I/O and communication capabilities
  • Diagnostic LEDs: Provides visual status information about the PLC’s operation
  • Terminal block connection: Offers simple and secure connection to I/O devices and communication networks

Function:

The Woodward 5501-470 Programmable Logic Controller (PLC) is a versatile and powerful controller for a wide range of industrial automation applications. It is ideal for applications that require high performance, scalability, and flexibility.

The PLC’s 32-bit RISC processor provides the processing power needed to handle demanding applications, while its scalable I/O capacity allows it to be used in a variety of applications. The PLC’s multiple communication ports enable it to communicate with a variety of devices and systems, and its expansion ports allow for future expansion of I/O and communication capabilities.

The 5501-470’s diagnostic LEDs provide valuable status information about the PLC’s operation, making it easy to troubleshoot any issues. Its terminal block connection offers a secure and reliable way to connect to I/O devices and communication networks.

With its DIN rail mounting, the 5501-470 can be easily installed in control panels, making it a space-saving solution for a variety of applications.

Applications:

The Woodward 5501-470 PLC is used in a wide variety of industrial automation applications, including:

  • Pumping stations
  • Conveyor systems
  • Material handling systems
  • Manufacturing processes
  • Environmental control systems

Additional Information:

  • Woodward 5501 Series PLC datasheet: [[移除了无效网址]

 

5501-470插图1 5501-470插图2

5501-381缩略图

5501-381

5501-381插图

5501-381

Specifications of the Woodward 5501-381 MicroNet TMR Power Supply

General

  • Manufacturer: Woodward
  • Product Type: MicroNet TMR Power Supply
  • Model: 5501-381
  • Series: MicroNet

Electrical Specifications

  • Input Voltage: 220 VAC
  • Input Frequency: 47 to 63 Hz
  • Input Current: 6.7 A
  • Output Voltage: 24 VDC
  • Output Current: 40 A
  • Maximum Power Output: 960 W
  • 5501-381插图1

    5501-381

  • Efficiency: 88%
  • Hold-up Time: 1 cycle @ 220 VAC

Environmental Specifications

  • Operating Temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage Temperature: -55°C to +85°C (-67°F to +185°F)
  • Humidity: 0% to 95% (non-condensing)

Physical Specifications

  • Dimensions: 10.5” H x 11.5” W x 7.5” D
  • Weight: 22 kg (48 lbs)

Features

  • Triple Modular Redundancy (TMR) architecture: The 5501-381 power supply utilizes a TMR architecture to provide the highest level of reliability and fault tolerance. This means that the power supply consists of three independent power modules, each of which is capable of providing full power to the load. If one of the modules fails, the remaining two modules can continue to provide power without interruption.
  • Hot-swappable modules: The power modules in the 5501-381 power supply are hot-swappable, which means that they can be replaced without having to take the power supply offline. This is a critical feature for applications where downtime is not acceptable.
  • Wide operating temperature range: The 5501-381 power supply has a wide operating temperature range of -40°C to +70°C (-40°F to +158°F), which makes it suitable for use in harsh environments.
  • High efficiency: The 5501-381 power supply has a high efficiency of 88%, which means that it converts most of the input power into usable output power. This can save energy and reduce operating costs.

Applications

  • Critical control systems
  • Industrial automation systems
  • Medical equipment
  • Transportation systems

Additional Information

For more information on the Woodward 5501-381 MicroNet TMR Power Supply, please refer to the following resources:

I hope this information is helpful. Please let me know if you have any other questions.

 

 

5501-381插图2

5501-381

5466-318 WOODWARD缩略图

5466-318 WOODWARD

5466-318 WOODWARD插图

5466-318 WOODWARD

 

Sure, here is the information on the Woodward 5466-318 MicroNet TMR Kernel PS Module:

Parameters:

  • Input Voltage: 24 VDC
  • Output Voltage: 5 VDC ±5%
  • Output Current (max): 10 A
  • Power Consumption: 24 VDC
  • Operating Temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage Temperature: -40°C to +85°C (-40°F to +185°F)
  • Humidity: 5% to 95% RH non-condensing
  • Vibration: 0.5 g RMS, 5 to 500 Hz
  • Shock: 5 g, 22 ms half-sine pulse
  • EMC: Meets IEC 61000-4-2, IEC 61000-4-3, and IEC 61000-4-6 standards
  • Safety: Meets UL 508, CSA C22.2 No. 142, and CE standards
  • 5466-318 WOODWARD插图1

    5466-318 WOODWARD

Specifications:

  • MicroNet TMR Kernel PS Module: Provides a redundant power supply for MicroNet safety systems
  • Triple Modular Redundancy (TMR): Employs three redundant power supply modules to ensure high reliability and fault tolerance
  • 5 VDC Output: Supplies 5 VDC power to MicroNet safety system components
  • 10 A Output Current: Provides sufficient power for demanding applications
  • Wide Operating Temperature Range: Operates in harsh environments with extreme temperatures
  • Rugged Construction: Withstands vibration, shock, and electromagnetic interference
  • Safety Certifications: Meets industry safety standards for hazardous environments

Dimensions:

  • Height: 4.5 inches (114 mm)
  • Width: 6.5 inches (165 mm)
  • Depth: 0.89 inches (22.5 mm)

Weight:

  • Approximately 0.88 lb (0.4 kg)

Series:

  • MicroNet Digital Control

Features:

  • Triple Modular Redundancy (TMR): Provides the highest level of fault tolerance for critical safety applications.
  • Wide operating temperature range: Operates in harsh environments with extreme temperatures.
  • Rugged construction: Withstands vibration, shock, and electromagnetic interference.
  • Safety certifications: Meets industry safety standards for hazardous environments.

Function:

The Woodward 5466-318 MicroNet TMR Kernel PS Module is a critical component of MicroNet safety systems. It provides a redundant power supply to ensure that the safety system remains operational even if one or two of the power supply modules fail. This is essential for applications where the failure of the safety system could have catastrophic consequences.

The module’s TMR architecture employs three independent power supply modules, each of which is capable of supplying the full power requirements of the MicroNet safety system. If one or two of the modules fail, the remaining module will continue to provide power, ensuring that the safety system remains operational.

The 5466-318 has a wide operating temperature range of -40°C to +70°C (-40°F to +158°F), making it suitable for use in harsh environments. It is also ruggedly constructed to withstand vibration, shock, and electromagnetic interference. The module is certified to meet industry safety standards for hazardous environments, including UL 508, CSA C22.2 No. 142, and CE standards.

Applications:

The Woodward 5466-318 MicroNet TMR Kernel PS Module is used in a wide variety of safety applications, including:

  • Power generation and transmission
  • Oil and gas
  • Chemical processing
  • Transportation
  • Industrial automation

Additional Information:

I hope this information is helpful. Please let me know if you have any other questions.

 

 

5466-318 WOODWARD插图2

5466-318 WOODWARD

IC693MDL753缩略图

IC693MDL753

 

IC693MDL753插图

IC693MDL753

 

Specifications of the GE Multilin IC693MDL753 Motor Protection Relay

General

  • Manufacturer: GE Multilin
  • Product Type: Motor Protection Relay
  • Series: IC Series
  • Model: IC693MDL753

Electrical Specifications

  • Control Power Voltage: 24 to 250 VDC or 20 to 240 VAC
  • Control Power Frequency: 48 to 62 Hz
  • Maximum Power Consumption: 25 VA
  • Insulation Resistance: 2,000 V dc for 1 minute
  • Internal Fuse Specifications: 2A, 250V
  • IC693MDL753插图1

    IC693MDL753

Current Input

  • Type: 5 or 1 A primary or secondary
  • Accuracy: Class 0.5

Rtd Input

  • Type: 100 or 200 Ohm platinum RTD
  • Accuracy: Class B

Relay Outputs

  • Number of Contacts: 8
  • Trip Relays: 2 latched output relays
  • Alarm Relays: 4 form C output relays
  • Auxiliary Relays: 2 form C output relays

Environmental Specifications

  • Operating Temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage Temperature: -55°C to +85°C (-67°F to +185°F)
  • Humidity: 0% to 95% (non-condensing)

Physical Specifications

  • Dimensions: 7.875” H x 7.875” W x 5.875” D
  • Weight: 6 lbs

Features

  • Comprehensive motor protection: The IC693MDL753 offers a wide range of motor protection features, including thermal overload, phase unbalance, ground fault, overcurrent, undercurrent, and locked rotor protection.
  • Advanced monitoring capabilities: The IC693MDL753 can monitor a variety of motor parameters, including motor current, voltage, power factor, speed, energy consumption, and bearing temperature.
  • Communication capabilities: The IC693MDL753 supports a variety of communication protocols, including Modbus RTU, DNP3, and IEC 61850.
  • “Learning” capability: The IC693MDL753 can “learn” certain motor parameters and adapt to each individual application.
  • Drawout versions available: Drawout versions of the IC693MDL753 are available for easy maintenance.

Applications

  • Pumps
  • Fans
  • Compressors
  • Conveyor belts
  • Machine tools

Additional Information

For more information on the GE Multilin IC693MDL753 Motor Protection Relay, please refer to the following resources:

I hope this information is helpful. Please let me know if you have any other questions.

IC693MDL753插图2

IC693MDL753

IC693MDL940缩略图

IC693MDL940

 

IC693MDL940插图

IC693MDL940

GE Multilin IC693MDL940 Ethernet Communication Module

Parameters, Specifications, Dimensions, Weight, Series, Features, and Function

Parameters:

  • Communication Protocol: Ethernet TCP/IP
  • Ethernet Port: 1 RJ45 Ethernet port
  • IP Address: Configurable IP address
  • Subnet Mask: Configurable subnet mask
  • Gateway Address: Configurable gateway address
  • Port Number: Configurable port number
  • Data Rate: Up to 100 Mbps
  • Power Supply: 24 VDC or 120 VAC
  • Power Consumption: Approximately 25 W
  • Operating Temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage Temperature: -40°C to +85°C (-40°F to +185°F)
  • Humidity: 5% to 95% RH non-condensing
  • Vibration: 0.5 g RMS, 5 to 500 Hz
  • Shock: 5 g, 22 ms half-sine pulse
  • EMC: Meets IEC 61000-4-2, IEC 61000-4-3, and IEC 61000-4-6 standards
  • Safety: Meets UL 508, CSA C22.2 No. 142, and CE standards

Specifications:

  • Ethernet Communication Module: Allows a Series 90-30 PLC to communicate over Ethernet networks
  • 1 RJ45 Ethernet Port: Provides a standard Ethernet connection
  • Configurable IP Address, Subnet Mask, Gateway Address, and Port Number: Enables flexible network configuration
  • High-Speed Data Rate: Supports data transfer rates up to 100 Mbps
  • Diagnostic LEDs: Provides status information about the module, including power, communication, and data errors
  • Terminal Block Connection: Offers simple connection to Ethernet networks and the Series 90-30 PLC
  • IC693MDL940插图1

Dimensions:

  • Height: 114 mm (4.50 in)
  • Width: 165 mm (6.50 in)
  • Depth: 22.5 mm (0.89 in)

Weight:

  • Approximately 0.4 kg (0.88 lb)

Series:

  • IC693 Series I/O Modules

Features:

  • Ethernet communication: Enables the PLC to communicate with other devices and systems over Ethernet networks, such as HMI panels, SCADA systems, and other PLCs
  • Configurable IP address, subnet mask, gateway address, and port number: Allows for flexible network configuration to fit specific network requirements
  • High-speed data rate: Supports fast data transfer for real-time communication and data exchange
  • Diagnostic LEDs: Provides visual status information about the module’s operation, aiding in troubleshooting and maintenance
  • Terminal block connection: Offers a secure and reliable way to connect to Ethernet networks and the Series 90-30 PLC

Function:

The GE Multilin IC693MDL940 Ethernet Communication Module is a versatile tool for connecting a Series 90-30 PLC to Ethernet networks. It provides a simple and reliable way to exchange data between the PLC and other devices on an Ethernet network, making it ideal for a variety of industrial automation applications.

The module’s Ethernet communication capabilities enable the PLC to integrate seamlessly into modern industrial networks, allowing it to share data with HMI panels, SCADA systems, and other PLCs. This facilitates real-time monitoring and control of industrial processes and enables remote access for maintenance and troubleshooting.

The IC693MDL940’s configurable IP address, subnet mask, gateway address, and port number provide flexibility in network configuration, allowing it to be adapted to various network settings and protocols. This ensures compatibility with a wide range of Ethernet networks and devices.

The module’s high-speed data rate of up to 100 Mbps supports fast data transfer, enabling real-time communication and efficient data exchange. This is crucial for applications that require quick response times and continuous data updates.

The IC693MDL940’s diagnostic LEDs provide valuable status information about the module’s operation, including power, communication, and data errors. This visual feedback aids in troubleshooting potential issues and maintaining network connectivity.

The module’s terminal block connection offers a secure and reliable way to connect to Ethernet networks and the Series 90-30 PLC. This ensures a stable and robust connection for consistent data transmission and control.

With its DIN rail mounting, the IC693MDL940 can be easily installed in

 

 

IC693MDL940插图2

IC693MDL940

IC693MDL742缩略图

IC693MDL742

IC693MDL742插图

IC693MDL742

 

 

GE Multilin IC693MDL742 Modbus Master/Slave Interface Module

Parameters, Specifications, Dimensions, Weight, Series, Features, and Function

Parameters:

  • Communication Protocol: Modbus RTU or Modbus TCP/IP
  • Baud Rate: 9600, 19200, 38400, or 57600 baud
  • Parity: None, Even, or Odd
  • Stop Bits: 1 or 2
  • Data Bits: 8
  • Slave ID: 1-255 (Modbus slave mode only)
  • Modbus Register Mapping: Modbus function code 3 (Read Holding Registers), function code 16 (Write Holding Registers), function code 4 (Read Input Registers), and function code 17 (Write Input Registers)
  • Power Supply: 24 VDC or 120 VAC
  • Power Consumption: Approximately 25 W
  • Operating Temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage Temperature: -40°C to +85°C (-40°F to +185°F)
  • Humidity: 5% to 95% RH non-condensing
  • Vibration: 0.5 g RMS, 5 to 500 Hz
  • Shock: 5 g, 22 ms half-sine pulse
  • EMC: Meets IEC 61000-4-2, IEC 61000-4-3, and IEC 61000-4-6 standards
  • Safety: Meets UL 508, CSA C22.2 No. 142, and CE standards
  • IC693MDL742插图1

    IC693MDL742

Specifications:

  • Modbus Master/Slave Interface Module: Allows a Series 90-30 PLC to communicate with Modbus devices
  • Modbus Master Mode: The module can act as a Modbus master, polling Modbus slave devices for data
  • Modbus Slave Mode: The module can act as a Modbus slave, responding to Modbus master requests for data
  • Supports Modbus Function Codes 3, 4, 16, and 17: Provides flexible data access for a wide range of Modbus devices
  • Diagnostic LEDs: Provides status information about the module, including power, communication, and data errors
  • Terminal Block Connection: Offers simple connection to Modbus devices and the Series 90-30 PLC

Dimensions:

  • Height: 114 mm (4.50 in)
  • Width: 165 mm (6.50 in)
  • Depth: 22.5 mm (0.89 in)

Weight:

  • Approximately 0.4 kg (0.88 lb)

Series:

  • IC693 Series I/O Modules

Features:

  • Modbus master/slave functionality: Allows the module to act as either a Modbus master or a Modbus slave, providing flexibility for a variety of communication scenarios
  • Support for Modbus function codes 3, 4, 16, and 17: Enables data exchange with a wide range of Modbus devices
  • Diagnostic LEDs: Provides visual status information about the module’s operation
  • Terminal block connection: Offers simple and secure connection to Modbus devices and the Series 90-30 PLC

Function:

The GE Multilin IC693MDL742 Modbus Master/Slave Interface Module is a versatile tool for connecting a Series 90-30 PLC to Modbus devices. It provides a simple and reliable way to exchange data between the PLC and Modbus devices, making it ideal for a variety of applications.

In Modbus master mode, the module can poll Modbus slave devices for data, such as sensor readings or control setpoints. This allows the PLC to gather information from a variety of sources and use it to make control decisions.

In Modbus slave mode, the module can respond to Modbus master requests for data. This allows the PLC to share its data with other devices, such as HMI panels or SCADA systems.

The IC693MDL742’s support for Modbus function codes 3, 4, 16, and 17 ensures compatibility with a wide range of Modbus devices. Its diagnostic LEDs provide valuable status information about the module’s operation, making it easy to troubleshoot any issues. Its terminal block connection offers a secure and reliable way to connect to Modbus devices and the Series 90-30 PLC.

With

IC693MDL742

IC693MDL742插图2

IC693MDL742

IC693MDL241缩略图

IC693MDL241

IC693MDL241插图

IC693MDL241

The GE Multilin IC693MDL241 is a microprocessor-based motor protection relay that provides comprehensive protection, control, and metering for medium and large induction motors. It is part of the Multilin IC Series relay family, which is designed for demanding industrial applications.

General Specifications

  • Manufacturer: GE Multilin
  • Product Type: Motor Protection Relay
  • Series: IC Series
  • Model: IC693MDL241

Electrical Specifications

  • Control Power Voltage: 24 to 250 VDC or 20 to 240 VAC
  • Control Power Frequency: 48 to 62 Hz
  • Maximum Power Consumption: 25 VA
  • Insulation Resistance: 2,000 V dc for 1 minute
  • Internal Fuse Specifications: 2A, 250V

Current Input

  • Type: 5 or 1 A primary or secondary
  • Accuracy: Class 0.5

Rtd Input

  • Type: 100 or 200 Ohm platinum RTD
  • Accuracy: Class B

Relay Outputs

  • Number of Contacts: 8
  • Trip Relays: 2 latched output relays
  • Alarm Relays: 4 form C output relays
  • Auxiliary Relays: 2 form C output relays

Environmental Specifications

  • Operating Temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage Temperature: -55°C to +85°C (-67°F to +185°F)
  • Humidity: 0% to 95% (non-condensing)

Physical Specifications

  • Dimensions: 7.875” H x 7.875” W x 5.875” D
  • Weight: 6 lbs

Features

  • Comprehensive motor protection: The IC693MDL241 offers a wide range of motor protection features, including thermal overload, phase unbalance, ground fault, overcurrent, and undercurrent protection.
  • Advanced monitoring capabilities: The IC693MDL241 can monitor a variety of motor parameters, including motor current, voltage, power factor, speed, and energy consumption.
  • Communication capabilities: The IC693MDL241 supports a variety of communication protocols, including Modbus RTU, DNP3, and IEC 61850.
  • “Learning” capability: The IC693MDL241 can “learn” certain motor parameters and adapt to each individual application.
  • Drawout versions available: Drawout versions of the IC693MDL241 are available for easy maintenance.
  • IC693MDL241插图1

    IC693MDL241

Applications

  • Pumps
  • Fans
  • Compressors
  • Conveyor belts
  • Machine tools

Additional Information

For more information on the GE Multilin IC693MDL241 Motor Protection Relay, please refer to the following resources:

I hope this information is helpful. Please let me know if you have any other questions.

IC693MDL241插图2

IC693MDL241

269PLUS缩略图

269PLUS

 

269PLUS插图

Specifications of the GE Multilin 269PLUS Motor Management Relay

General

  • Manufacturer: GE Multilin
  • Product Type: Motor Management Relay
  • Series: 269PLUS

Electrical Specifications

  • Control Power Voltage: 20 to 60 VDC / 20 to 48 VAC (low voltage models)
  • Control Power Voltage: 90 to 300 VDC / 80 to 265 VAC (high voltage models)
  • Control Power Frequency: 50/60 Hz
  • Max. Power Consumption: 20 VA
  • Insulation Resistance: IEC255-5,500 V DC
  • Internal Fuse Specifications: T3.15A H 250 V, timelag high breaking capacity

Rtd Input

  • Type: 120 Ohm nickel RTD (269PLUS-120N-125VDC model)
  • Other RTD types available
  • 269PLUS插图1

    269PLUS

Relay Outputs

  • Number of Contacts: 4
  • Trip Relay: Latched output relay
  • Alarm Relay: 1
  • Auxiliary Relays: 2

Environmental Specifications

  • Operating Temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage Temperature: -55°C to +85°C (-67°F to +185°F)
  • Humidity: 0% to 95% (non-condensing)

Physical Specifications

  • Dimensions: Approx. 11.375” L, 7.5” W, 4.5” H
  • Weight: 5lb, 14oz

Features

  • Comprehensive motor protection: The 269PLUS offers a wide range of motor protection features, including thermal overload, phase unbalance, ground fault, and overcurrent protection.
  • Advanced monitoring capabilities: The 269PLUS can monitor a variety of motor parameters, including motor current, voltage, power factor, and speed.
  • “Learning” capability: The 269PLUS can “learn” certain motor parameters and adapt to each individual application.
  • Drawout versions available: Drawout versions of the 269PLUS are available for easy maintenance.

Applications

  • Pumps
  • Fans
  • Compressors
  • Conveyor belts
  • Machine tools

Additional Information

For more information on the GE Multilin 269PLUS Motor Management Relay, please refer to the following resources:

  • GE Multilin 269PLUS product page: [移除了无效网址]
  • GE Multilin 269PLUS Instruction Manual: [移除了无效网址]

I hope this information is helpful. Please let me know if you have any other questions.

 

 

269PLUS插图1

269PLUS

269PLUS插图2

269PLUS

IC693ALG221缩略图

IC693ALG221

 

IC693ALG221插图

IC693ALG221

GE Multilin IC693ALG221 Analog Input Module

Parameters, Specifications, Dimensions, Weight, Series, Features, and Function

Parameters:

  • Input Type: Analog current
  • Number of Inputs: 4
  • Input Range: 4 mA to 20 mA, -20 mA to 20 mA, or 0 mA to 20 mA
  • Accuracy: ±0.1% of full scale
  • Resolution: 12 bits
  • Update Rate: 2 milliseconds per channel
  • Power Supply: 24 VDC or 120 VAC
  • Power Consumption: Approximately 25 W
  • Operating Temperature: -40°C to +70°C (-40°F to +158°F)
  • Storage Temperature: -40°C to +85°C (-40°F to +185°F)
  • Humidity: 5% to 95% RH non-condensing
  • Vibration: 0.5 g RMS, 5 to 500 Hz
  • Shock: 5 g, 22 ms half-sine pulse
  • EMC: Meets IEC 61000-4-2, IEC 61000-4-3, and IEC 61000-4-6 standards
  • Safety: Meets UL 508, CSA C22.2 No. 142, and CE standards

Specifications:

  • Analog Input Module: Converts analog current signals to digital signals for use by a Series 90-30 PLC
  • Four Isolated Inputs: Provides four independent analog input channels
  • Selectable Input Ranges: Allows for a wide range of analog input signals
  • High Accuracy and Resolution: Ensures precise and reliable data conversion
  • Fast Update Rate: Provides real-time data acquisition
  • Diagnostic LEDs: Provides status information about the module, including power, input, and communication
  • Terminal Block Connection: Provides easy connection to the analog input signals and the Series 90-30 PLC

Dimensions:

  • Height: 114 mm (4.50 in)
  • Width: 165 mm (6.50 in)
  • Depth: 22.5 mm (0.89 in)

Weight:

  • Approximately 0.4 kg (0.88 lb)

Series:

  • IC693 Series I/O Modules

Features:

  • Four isolated analog input channels: Accepts four independent analog current signals
  • Selectable input ranges: Adapts to a wide range of analog input signal types
  • High accuracy and resolution: Ensures precise and reliable data conversion
  • Fast update rate: Provides real-time data acquisition
  • Diagnostic LEDs: Provides visual status information about the module’s operation
  • Terminal block connection: Offers simple and secure connection to analog input signals and the Series 90-30 PLC
  • IC693ALG221插图1

    IC693ALG221

Function:

The GE Multilin IC693ALG221 Analog Input Module is a versatile tool for converting analog current signals to digital signals for use by a Series 90-30 PLC. It is ideal for a variety of applications, including process control, machine automation, and environmental monitoring.

The module’s four isolated analog input channels allow it to accept four independent analog current signals. Its selectable input ranges ensure that it can be used with a wide variety of analog input signal types. The module’s high accuracy and resolution ensure precise and reliable data conversion, while its fast update rate provides real-time data acquisition.

The IC693ALG221’s diagnostic LEDs provide valuable status information about the module’s operation, making it easy to troubleshoot any issues. Its terminal block connection offers a secure and reliable way to connect to analog input signals and the Series 90-30 PLC.

With its DIN rail mounting, the IC693ALG221 can be easily installed in control panels, making it a space-saving solution for a variety of applications.

Additional Information:

  • GE Multilin IC693 Series I/O Modules datasheet: [移除了无效网址]
  • Radwell International product page: [移除了无效网址]
  • Automation Industrial product page: [移除了无效网址]

 

IC693ALG221插图1

IC693ALG221

IC693ALG221插图2

IC693ALG221

Back to Top

Search For Products

Product has been added to your cart