Archives

A-B 1756-OB32 is an output module from Rockwell Automation,which is widely used in the field of industrial automation.The following is a detailed introduction to the module:

1.Basic properties

Brand:A-B(Rockwell Automation)

Model:1756-OB32

Origin:United States

2.Technical specifications and parameters

Number of output points:32 points(16 points/group)

Voltage category:12/24V DC source

Operating voltage range:10~31.2V DC

Output delay time:

Off to On:60μs nominal/1ms maximum

On to Off:200μs nominal/1ms maximum

A-B 1756-OB32

Maximum current per point:0.5A(linearly decreasing to 0.35A at 50°C and 60°C)

Maximum module current:16A(linearly decreasing to 10A at 50°C and 60°C)

Surge current per point:maximum 1A for 10ms,repeatable every 2 seconds(at 60°C)

Load current:minimum 3mA per point

Isolation voltage:250V(continuous),basic insulation type,output to backplane,no isolation between output groups

Rated current:11.5A

Firmware version:V3.2(or other versions,which may vary depending on product batches)

III.Functions and features

High-performance output:Provides 32 discrete output points to meet various control needs in industrial automation systems.

Wide voltage range:supports wide voltage range input of 10~31.2V DC,adapting to industrial environments with different voltage standards.

Fast response:has fast output delay time to ensure the timeliness and accuracy of system control.

High reliability:uses high-quality components and advanced manufacturing processes to ensure the reliability and stability of the module.

Easy to install and maintain:modular design makes installation and maintenance more convenient and quick.

A-B 1756-OB32

IV.Application field

A-B 1756-OB32 output module is widely used in various industrial automation control systems,such as automation control systems of chemical plants,sewage treatment plants,cement plants and other factories.It can be used to control various discrete devices,such as motors,valves,sensors,etc.,to achieve efficient operation of automated production lines.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

GE IC697MDL653 is a 24V DC input module for the Series 90-70 programmable controller(PLC)produced by General Electric(GE).The following is a detailed introduction to the module:

I.Product Overview

The IC697MDL653 module is used to connect external 24V DC signals to tahe PLC and convert them into signals that the PLC can understand.It is one of the commonly used components in industrial automation control systems and can meet various complex application requirements.

2.Technical specifications

Number of input points:32

Power supply voltage:24V DC

Input voltage:24V DC

Input current:2A per point at most

Power consumption:5W

Operating temperature:-20℃to 60℃

Storage temperature:-40℃to 85℃

Vibration:5g to 2kHz

Shock:30g

GE IC697MDL653

Protection level:IP67

Dimensions:140mm×60mm×25mm(may vary depending on the specific product)

Weight:about 200g(specific weight may vary depending on product batch and manufacturing process)

3.Functional features

Support positive and negative logic:various types of sensors and switches can be connected to meet different signal input requirements.

Support current limit:can protect the module from overload damage and improve the stability and reliability of the system.

Support filtering function:can eliminate signal noise and ensure the accuracy and stability of the input signal.

Diagnostic indicator:can indicate the module status and fault information,which is convenient for quick positioning and problem solving.

IV.Application scenarios

The IC697MDL653 module is widely used in various industrial automation control systems,such as manufacturing,chemical,electric power,water treatment and other fields.It can provide stable and reliable signal input functions for these systems to ensure the normal operation and efficient production of the system.

GE IC697MDL653

V.Product advantages

High performance:The use of advanced technology and manufacturing processes ensures that the module has high performance and stability.

High reliability:After rigorous testing and verification,it meets industry standards and specifications to ensure long-term stable operation.

Easy to use:The module design is simple and clear,easy to install and debug,and reduces the difficulty and cost of use.

Wide compatibility:It has good compatibility with other modules of the Series 90-70 PLC series,which is convenient for system integration and expansion.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

A-B(Allen-Bradley)1756-OB16D is a product of Rockwell Automation,which is usually classified as an output module or controller gate driver board I/O communication module.The following is a detailed introduction to the product:

1.Basic information

Brand:A-B(Allen-Bradley),belongs to Rockwell Automation.

Model:1756-OB16D.

Origin:Some say that the product is made in Germany,and some say that it is made in the United States.

2.Technical specifications and parameters

Structural form:Modular,easy to install and integrate into the automation system.

Installation method:Supports control room installation,and may also support plug-and-play(the specific installation method may vary depending on the application scenario).

Processor and I/O:May be equipped with hard PLC I/O points,the specific number of points may vary depending on the product batch or configuration.At the same time,it may support multiple communication interfaces,such as Ethernet/PROFINET interface,etc.

A-B 1756-OB16D

Working voltage:Usually 24V,to ensure that the module operates stably within the normal voltage range.

Output frequency:50-60Hz,adapted to the power standards of different countries and regions.

Processing speed:up to 300 microseconds,fast response to ensure efficient operation of the system.

Ambient temperature and humidity:may be applicable to an ambient temperature of 50°C(the specific range may vary depending on the product)and an ambient humidity of 70%(under non-condensing conditions).

A-B 1756-OB16D

III.Product Features and Applications

Safety and environmental protection:The product design complies with safety and environmental protection standards to ensure the safety and reliability of users during use.

Reliable quality:After strict quality control and testing,the stability and durability of the product in different application scenarios are ensured.

Easy to use:The modular design makes the product easy to install,configure and maintain,reducing the difficulty and cost of user operation.

Wide application:Applicable to various industrial automation systems,such as manufacturing,process control,etc.,to meet the different needs of users.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Schneider 140CPS12420 is a power module produced by Schneider,which is widely used in industrial automation and control systems.The following is a detailed introduction to Schneider 140CPS12420:

1.Basic properties

Brand:Schneider

Model:140CPS12420

Type:power module

2.Technical features and parameters

Input voltage and power type:

Supports 230V AC(170276V)and 115V AC(93138V)input.

The power type is redundant power supply,which improves the reliability and stability of the system.

Output current and power:

Under 230V AC input,the output current is 600mA;under 115V AC input,the output current is 1100mA.

The rated power is 130VA.

Schneider 140CPS12420

Instantaneous peak current:

At 115V AC input,the instantaneous peak current is 38A;at 230V AC input,the instantaneous peak current is 19A.

Power supply output current:

At 60℃,the power supply output current in redundant mode is 10A;the power supply output current in independent mode is 11A.

Power consumption:

The power consumption is 6+(1.5x output current),where the output current unit is A.

Other parameters:

The relevant fuse level is 2A slow-break type.

Harmonic distortion is less than or equal to 10%basic effective value.

The product is CUL certified.

Schneider 140CPS12420

III.Application field

Schneider 140CPS12420 power supply module is widely used in CNC machinery,metallurgy,oil and gas,paper printing,textile printing and dyeing,machinery,electronic manufacturing,automobile manufacturing,tobacco,plastic machinery,power plants,water conservancy treatment/environmental protection,municipal engineering,steel mills,cement plants,robots,rail transit and other fields.As a key component of industrial automation and control systems,it provides stable and reliable power support for the system.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

MODICON 140CPS11420 is a power module produced by Schneider Electric.It belongs to the Modicon Quantum series,which has industry-leading performance in the automation control platform.The following is a detailed introduction to MODICON 140CPS11420:

1.Product Overview

MODICON 140CPS11420 power module is mainly used to provide power for controllers and other devices in industrial automation systems.It supports a variety of types of equipment and application requirements and is an indispensable component in industrial automation control systems.

2.Technical Specifications

Power supply type:summable or independent power supply module to meet the needs of different types of equipment.

Input voltage:

115V AC,93132V,4763Hz

230V AC,170276V,4763Hz

Input current:

1300mA at 115V AC

750mA at 230V AC

MODICON 140CPS11420

Maximum inrush current:

19A at 230V AC

38A at 115V AC

Rated power:130VA

Output voltage:5.1V DC

Power supply output current:

11A for standalone and 20A for summation at 60°C

Output overvoltage protection:Internal protection mechanism

Output overload protection:Internal protection mechanism

Power consumption:6+(1.5×Iout),where Iout is the output current(A)

Warning output:1 NC 6A 220V power failure alarm

Local signal indication:1 LED green indicator(PWR OK)

Product certification:CE,CUL,etc.,in accordance with CSA C22.2 No.142 and UL 508 standards

III.Environmental requirements

Working temperature:0~60°C

Storage temperature:-40~85°C

Relative humidity:95%(non-condensing)

Working altitude:≤5000m

MODICON 140CPS11420

IV.Product features

High performance:Modicon Quantum automation control platform has a high-performance multi-tasking system and up to 7MB of storage space,supports multiple IEC programming languages,and is suitable for various complex application requirements.

High reliability:The coating protection module is suitable for harsh environments,and the safe I/O design ensures high reliability.Supports third-party device access for easy system integration.

Easy to maintain:Each module has a small LCD screen and buttons for local monitoring and fault diagnosis.The front panel has multiple built-in ports(such as USB,Ethernet TCP/IP,etc.)for easy connection and debugging.

High integration:It integrates excellent communication functions and diagnostic functions,provides large-capacity data storage space,and maintains an excellent scanning cycle.New modules can be installed without downtime,improving system availability and flexibility.

5.Application fields

MODICON 140CPS11420 power module is widely used in industrial control systems,automation equipment,sensors and actuators.It can provide stable and reliable power support for these devices to ensure the normal operation and efficient production of industrial automation systems.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

FOXBORO P0904HA may refer to a specific product model under the FOXBORO brand.According to publicly released information,here is a detailed introduction to FOXBORO IPM2-P0904HA,which may belong to the same series or have similar functional characteristics:

1.Product Overview

FOXBORO IPM2-P0904HA is a high-performance product of Emerson’s FOXBORO brand,designed for industrial automation control systems.It may be a redundant controller PLC function module,processor module or industrial power module(depending on the application scenario and configuration).

2.Technical specifications and functional features

Technical specifications

Processor type:high-performance industrial processor(for processor modules)

Memory:large-capacity RAM and flash memory(supports complex control logic,the specific capacity depends on the configuration)

Communication interface:Ethernet,serial communication and other interfaces,supporting multiple communication protocols

FOXBORO P0904HA

Input/output module:expandable I/O module to meet various control requirements(for PLC function modules)

Operating temperature:usually ranges from-20°C to 60°C(or 0°C to 55°C,depending on the product configuration),suitable for harsh industrial environments

Protection level:IP65/IP67(depending on the specific installation situation),dustproof and waterproof design

Features

Redundant design:dual processors and hot backup power supply(for certain configurations)ensure that the system can run stably under any circumstances

High reliability:After rigorous testing and verification,it complies with industry specifications to ensure long-term stable operation

Scalability:supports a variety of I/O modules and communication interfaces to facilitate system expansion and upgrades

Easy to program and maintain:equipped with programming software and tools to simplify the programming and maintenance process

Powerful diagnostic function:real-time monitoring of system status,providing detailed fault information and alarms,facilitating rapid location and problem solving

Rich control algorithms:supports a variety of control algorithms to meet various industrial automation control needs

FOXBORO P0904HA

III.Application scenarios

FOXBORO IPM2-P0904HA is widely used in various industrial automation control systems,such as:

Oil and gas:used for control and monitoring in oil and gas extraction,processing and transportation

Chemical:precise control of key parameters such as temperature,pressure,flow rate,etc.in chemical production processes

Electricity:automated control and monitoring in power generation,transmission and distribution systems

Water treatment:automated control and monitoring of water treatment plants to ensure water quality safety and treatment efficiency

Manufacturing:automated control and monitoring on production lines to improve production efficiency and product quality

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

SCHNEIDER 140ACI04000 is an analog input module produced by Schneider.This module plays an important role in industrial automation systems and is used for conversion between analog and digital quantities.The following is a detailed introduction to this module:

1.Basic attributes

Brand:Schneider(Schneider)

Model:140ACI04000

2.Technical characteristics

High channel count:This module provides 16 analog input channels and can receive multiple analog signals at the same time,significantly improving the system’s data processing capabilities.

Multiple input ranges:Supports multiple analog signal input ranges,such as 4~20mA,0~20mA,0~25mA,etc.,which can meet the needs of different applications.

SCHNEIDER 140ACI04000

High resolution:The analog input resolution is up to a certain count range(such as 0~16000 counts,the specific range depends on the input signal),providing high-precision signal conversion and measurement capabilities.

High accuracy:It has low linearity error and absolute accuracy error(for example,the maximum linearity error is±6μA,and the absolute accuracy error is±0.125%of full scale),ensuring the accuracy and reliability of the measurement results.

Powerful protection functions:Built-in over-current,over-voltage and other protection functions ensure that the module can operate safely under abnormal conditions.

Easy to integrate:The module design is compact and easy to integrate with other industrial automation equipment and systems.

3.Performance parameters

Number of inputs/power consumption:16 channels/5W

Address requirements:17 input words

Analog input resolution:

04095 counts(420mA)

Other counting ranges depend on the specific input signal,such as 025000 counts(025mA),etc.

Absolute maximum input:30mA

SCHNEIDER 140ACI04000

Input impedance:250 ohms

Linearity error:±6μA maximum(specific value depends on input signal range)

Temperature offset accuracy:≤0.0050%full scale/℃(or±0.0025%full scale/℃,the specific value may vary depending on the model or batch)

Common mode rejection:>-90dB 60Hz

Fault type:disconnection(for 4~20mA signal)

Demand bus current:360mA

4.Application areas

SCHNEIDER 140ACI04000 analog input module is widely used in various industrial automation and control systems,such as manufacturing,energy,water treatment and other fields.It can be used to receive analog signals output from sensors,transmitters and other devices,and convert them into digital signals for processing and control by the central processor.By cooperating with other equipment,functions such as automated production,energy management,and environmental monitoring are realized.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

SCHNEIDER 140ARI03010 is an analog input module produced by Schneider Electric.The following is a detailed introduction to the module:

1.Product Overview

Brand:Schneider

Model:140ARI03010

Type:Analog Input Module

2.Technical Features

High Precision:The 140ARI03010 module has high precision and can accurately receive and process analog signals from various sensors,such as resistance temperature detectors(RTDs).

Multi-channel design:The module has 8 channels and can process multiple analog signal inputs at the same time,which improves the flexibility and efficiency of the system.

Multiple RTD Type Support:Supports multiple RTD types including Ni100,Pt 100,etc.,suitable for temperature monitoring and control in different application scenarios.

SCHNEIDER 140ARI03010

Incremental Encoder Input:In addition to basic functions,it also supports incremental encoder input,which is suitable for application scenarios that require high-precision analog signal input.

DC Power Supply:The DC power supply ensures its stability and compatibility in various industrial environments.

3.Application scenarios

The 140ARI03010 module is designed for industrial automation systems and is widely used in temperature monitoring and control in industries such as manufacturing,chemical,oil and gas.Its high precision and versatility make it an indispensable key component in these industries.

SCHNEIDER 140ARI03010

4.Performance advantages

PLC control:As a member of the Schneider 140 series,this module has PLC control functions and can be seamlessly integrated with the PLC system to achieve automatic control.

Communication capability:Supports fieldbus communication protocol,which facilitates data exchange with other devices,sensors or actuators.

Multitasking:Ability to handle multiple tasks at the same time,improving the overall performance and efficiency of the system.

Data processing:With powerful data processing capabilities,it can process and analyze the received analog signals in real time.

Safety and reliability:With simple structure,stable and reliable,it has high safety and reliability and is suitable for various harsh industrial environments.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB AI810 3BSE008516R1 is an analog input module for industrial automation systems.The following is a detailed introduction to the module:

1.Product Overview

Brand:ABB

Model:AI810 3BSE008516R1

Type:Analog Input Module

ABB AI810 3BSE008516R1

2.Main Functions and Applications

Analog Input:This module is capable of receiving analog signals from sensors,instruments or other analog devices,which are usually continuously changing,such as temperature,pressure,flow,etc.

Industrial Automation System Integration:The AI810 module can be integrated into industrial automation systems as part of the control system to monitor and control analog signals in industrial processes.

PLC System Application:The AI810 module can be used with PLC(Programmable Logic Controller)systems as an analog input module to connect sensors,instruments and other analog devices to convert analog signals into digital form for further processing by the system.

Fieldbus Communication:This module supports fieldbus communication protocols to exchange data with other devices,sensors or actuators to improve the overall integration of the system.

ABB AI810 3BSE008516R1

3.Technical Features

High precision:It can accurately measure and convert analog signals to ensure the stability and reliability of the system.

High reliability:It has a simple structure,is not easily affected by external interference,and has high stability and reliability.

Easy to install:The installation process is relatively simple,just install it in a suitable location and connect the relevant equipment.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

SCHNEIDER 140CPS11420 is a power module produced by Schneider Electric,belonging to the Modicon Quantum series.The following is a detailed introduction to the product:

1.Basic features

Main use:Provide power support for controllers and other devices in industrial automation systems.

Power supply type:Provide DC or AC power to meet the needs of different types of equipment.

Output voltage:The output to the bus is 5.1 volts DC.

Input voltage range:

Accepts 115 volts or 230 volts AC as input.

Specific ranges include 115V(93-132V)AC 47-63Hz,or 230V(170-276V)AC.

Input current:

The input current is 1300mA on 115V.

The input current is 750mA on 230V.

Inrush current:At 230V input,the inrush current is 19A.

Rated power:130VA.

SCHNEIDER 140CPS11420

2.Technical Specifications

Terminals of the terminal block:

Terminals 1 and 2 have a rated voltage of 220 volts AC.

Terminals 1 and 2 also have normally closed relay contacts of 6 amps/30 volts DC,5A.

Input frequency:can be between 47-63 Hz.

Voltage total harmonic distortion:less than 10%of the fundamental RMS value.

Protection function:has internal output overvoltage protection and output overload protection.

Electromagnetic compatibility:

Good resistance to electromagnetic interference.

Can withstand 10V/m electromagnetic field interference in the frequency range of 80-2000MHz,in accordance with IEC 801-3 standard.

The electromagnetic interference generated by itself is low and will not have adverse effects on surrounding electronic equipment.

SCHNEIDER 140CPS11420

3.Application environment and status indication

Working environment temperature:0-60°C.

Storage environment temperature:-40-85°C.

Relative humidity:95%without condensation.

Working altitude:≤5000m.

Status indication:Equipped with 1 green LED indicator to display the power status.When the power supply is working properly,the green light is on.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl