GE IC695ETM001 is an Ethernet module that belongs to the PACSystem Rx31 series of GE Fanuc(now part of Emerson Automation).The following is a detailed introduction to the module:
I.Basic Overview
The IC695ETM001 is a two-port Ethernet transmitter module that enables Ethernet connectivity and supports 10/100 Mbps transmission rates and auto-negotiation.It fits into the RX3i slot and enables PACSystem to communicate with other controller platforms such as the 90 series and VersaMax controllers.
II.Technical Specifications and Features
Ethernet Ports:
Two Ethernet ports with redundant I/P addressing.
Supports 10/100 Mbps transmission rate with auto-negotiation.
The Ethernet port is recessed to protect the network cable terminals.
Protocol Support:
Ability to execute Service Request Transport Protocol(SRTP),Modbus TCP,and Ethernet Global Data(EGD)protocols through a four-layer TCP/IP protocol stack.
Supports periodic data exchange through Ethernet global data and executes EGD commands to read and write controllers.
Supports TCP/IP services using Serial Real-Time Transport Protocol(SRTP)and SRTP channels.
Capable of acting as a MODBUS TCP server and a MODBUS TCP client.
Embedded Switch:
Configurable for auto-negotiation,sensing,speed,and crossover detection.
Time Synchronization:
Time synchronization with an SNTP time server is available over Ethernet TCP/IP.
Processor Speed:
The Ethernet processor speed is 200 MHz.
Indicators:
Ethernet OK,LAN OK,log clear,individual port,and speed LED status indicators are provided.
RS-232 Serial Port:
One RS-232 serial port is provided,supporting data transfer rates from 1200 bps to 115200 bps.
Station Manager Functionality:
The built-in station manager functionality is accessible via both serial and Ethernet connections and provides monitoring access.
Services provided include commands for polling and controlling the station,access for monitoring statistics,logs,and configuration parameters,and password security.
GE IC695ETM001
Hot-swap function:
Supports insertion(hot-swap)when power is on or the processor is in run mode,but firmware version 2.51 must be installed to enable this function.
Compatibility and upgrade:
Compatible backplanes are IC695CHS007,CHS012 or CHS016.
Compatible with any other PACSystem RX3i module except CPE400.
Module firmware can be upgraded in the field through software tools provided by GE Fanuc.
III.Application field
The IC695ETM001 module is widely used in industrial automation,especially in situations where high-speed and reliable Ethernet communication is required.It enables PACSystem to connect seamlessly with other controller platforms to achieve data exchange and remote control.
The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.
We supply goods directly from abroad,without intermediaries,reducing the cost of use.
There is really no medium that can make a difference!!
Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!
If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.
Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.
Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!
1.”Power plant DCS monitoring system”
2.”Intelligent flat tempering furnace system manufacturing”
3.”PLC programmable transmission control system”
4.”DCS distributed control system”
5.”Intelligent fire water suppl
