BENTLY 3500 42M 176449-02

BENTLY 3500/42M 176449-02 is a vibration/displacement monitoring module produced by Bently Nevada,USA.The following is a detailed introduction to the product:

1.Product Overview

Brand:Bently Nevada

Model:3500/42M 176449-02

Type:Vibration/Displacement Monitoring Module

2.Main Functions

Vibration Monitoring:It can monitor the vibration level of rotating mechanical equipment in real time to help evaluate the operating status of the equipment.

Displacement Monitoring:In addition to vibration monitoring,it can also monitor the displacement of the equipment to provide comprehensive health monitoring.

Temperature Monitoring:Some information shows that the module can also monitor the temperature of the equipment,but the specific function may vary depending on the product version or customized requirements.

Alarm and Protection Function:When the vibration,displacement or temperature(if applicable)is detected to be out of the normal range,it can sound an alarm and start the protection mechanism to prevent further damage to the equipment.

BENTLY 3500 42M 176449-02

3.Technical Specifications

Number of Channels:It has 4 independent analog input channels,each with an independent amplifier and sampling circuit.

Resolution:Provides up to 24-bit resolution to ensure the accuracy of measurement results.

Input range:Supports a variety of adjustable input ranges to meet the amplitude requirements of different signal sources.

Calibration function:With built-in automatic calibration function,each channel can be calibrated during the measurement process to improve the accuracy and reliability of the measurement.

Operating temperature range:From-40°C to+85°C(or different depending on the specific product version),it can adapt to various industrial environments.

Sensitivity:When correctly terminated and positioned at the calibration angle,it is 20mV/mm/s(500 mV/in/s)±5%at 100 Hz(6000 cpm)(the specific value may vary depending on the product version or customized requirements).

Frequency response:From the minimum operating frequency(see ordering information)to 1 kHz(60000 cpm),the typical value is from+0 to±3dB.

BENTLY 3500 42M 176449-02

4.Application Scenarios

BENTLY 3500/42M 176449-02 is widely used in power generation,chemical industry,metallurgy,petroleum,cement and other industrial sectors to monitor the vibration and displacement of large rotating machinery,such as shaft vibration,bearing vibration,expansion difference,swing,eccentricity,axial displacement and casing expansion of turbines,compressors,water pumps,etc.

5.Product Advantages

High-precision measurement:Provides up to 24-bit resolution and low noise level to ensure the accuracy of measurement results.

High channel density:With 4 independent analog input channels,it can measure and control multiple signal sources at the same time,improving the efficiency of testing and measurement.

Strong flexibility:Supports a variety of adjustable input ranges to meet the amplitude requirements of different signal sources.

High reliability:With built-in automatic calibration function and powerful software support,it improves the accuracy and reliability of measurement.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl