ABB PM856AK01

ABB PM856AK01 is a powerful controller.Here is a detailed introduction about it:

1.Basic information

Article number:3BSE066490R1

Type:DC power module processor module

2.Technical specifications

Redundancy:Not supported

Clock frequency:24 MHz

Performance:1000 Boolean operations,0.46 ms

Memory:16MB(from 800xA 5.1 FP4)

RAM:10.337 megabytes of RAM available for applications(from 800xA 5.1 FP4)

Flash:2 megabytes(MB)of flash memory for firmware storage

Power supply:24V DC(19.2~30V DC)

Power consumption:+24V(typical/maximum)180/300 mA,power consumption 4.32 W(maximum 7.2 W)

ABB PM856AK01

Built-in battery:lithium battery,3.6V

Clock synchronization:AC 1ms between 800M controllers,using CNCP protocol

III.Applications and tasks

Number of applications per controller:32

Number of programs per application:64

Number of charts per application:128

Number of tasks per controller:32

Cycle time per application:as low as 1ms

IV.Communication and connection

Communication modules on CEX bus:12 single CEX bus modules

Power supply current on CEX bus:maximum 2.4A

I/O​​capacity on Modulebus:up to 96 I/O modules

Modulebus scan rate:0~100ms(actual time depends on the number of I/O modules)

Power supply current on electrical module bus:maximum 1.0A at 24V;maximum 1.5A at 5V

Ethernet interface:Ethernet(IEEE 802.3),10Mbit/s,RJ-45,female(8-pole)

Control network protocols:MMS(Manufacturing Message Service)and IAC(Inter-Application Communication)

RS-232C interface:2(1 general purpose,1 for maintenance tools)

ABB PM856AK01

V.Physical characteristics

Dimensions:width 119 mm(4.7 inches),height 186 mm(7.3 inches),depth 135 mm(5.3 inches)

Weight:1100 g(2.4 pounds)

VI.Other characteristics

Reliability and simple fault diagnosis:With reliability and simple fault diagnosis procedures

Modular design:Allows gradual expansion to meet different application requirements

IP20 protection:No storage module is required,providing good protection performance

Configurability:The controller can be configured as 800xA control builder,which is convenient for users to integrate and configure the system

Communication connection:Based on standard hardware for optimal communication connection(Ethernet,PROFIBUS DP,etc.)

VII.Application areas

ABB The PM856AK01 controller is suitable for various industrial automation and process control fields,such as manufacturing,energy,chemical,water treatment and other industries.Its high performance,reliability and modular design make it an ideal choice in these fields.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl