GE IS220UCSAH1A is a GE Mark VIe controller with a PMAC processor.Here is a detailed introduction to the product:
I.Product Overview
IS220UCSAH1A is a processor/controller created by General Electric for the Mark VI system.The Mark VI platform is designed to manage gas turbines or steam turbines and is released by GE as part of the Speedtronic series.It has an HMI(human-machine interface)and its software is designed for running heavy-duty turbines,such as the CIMPLICITY graphical interface.
II.Product Features
Processing power:It has powerful processing power and can be used to execute complex control algorithms and logic.
Communication interface:It has a variety of communication interfaces,such as Ethernet,serial port,etc.,for data exchange with other devices,control systems or networks.
Storage capacity:It has sufficient memory and storage capacity to store programs,data and configuration information.
Programmability:It supports programmable control logic and can be programmed and configured according to application requirements.
Real-time:For industrial automation systems,real-time is very important.This processor module has high real-time performance and can respond to control instructions and changes in real time.
Reliability:High reliability to ensure stable operation of the system.
Security:Security features such as access control,data encryption,etc.are provided to ensure the security of system data and operations.
GE IS220UCSAH1A
III.Physical Features
Appearance:IS220UCSAH1A is a single boxed component with a front panel to allow connection of communications,two screws on the rear edge for mounting,and grille openings on three sides to allow air flow.The controller is designed for base mounting within a cabinet,with up to three components mounted adjacent to each other for a compact arrangement that can easily serve a triple redundant system.
Front Panel:There are six female jack connectors,a USB port,and multiple LED indicators.This includes an LED indicator labeled”Link/Operation”on the left side of the front panel,and a row of indicators labeled”Power”,”Start”,”Online”,”Flash”,”DC”,and”Diagnostics”in the middle of the panel.
Jack connector:For Ethernet connection,allowing the board to communicate with other MKVI,MKVIe,or EX2100 excitation controls,as well as with maintenance stations and operator stations.
GE IS220UCSAH1A
IV.Technical Specifications
Operating System:Applicable to QNX operating system.
Processor:Freescale 8349,667 MHz processor.
Power supply:Use a power supply with a rated voltage of 18~36V dc,12 watts.No fan is required for cooling even at the highest rated temperature.
Application environment:Can be used for NFPA Class 1 Zone 2 applications.
Withstand voltage:More than 2.5 kV/1 minute.
Working voltage:90~265 VAC/50/60 Hz.
Current consumption:Maximum 5VA or maximum 100mA(24VDC/AC).
Output mode:SSR(30mA/12V).
Input mode:PT/K/J/R/S/T/BE/N/L(optional)or 420mA or 010VDC(optional).
Control mode:Fuzzy+PID or ON/OFF optional.
Control output:Relay or SSR or 4~20mA(optional).
Alarm output:Relay 1A(3A/250VAC SPDT).
Prompt range:-999~9999.
Prompt accuracy:±(0.1%of F.S.+1 digit).
Setting range:-999~9999.
Memory mode:EEPROM.
Dielectric strength:greater than 50MΩ/500VDC.
Operating environment:-25℃80℃;35%85%RH.
EMC standard:ESD:8KV air discharge(level 3)/EN-61000-4-2;RF interference:10V/M/ENV-50140;Explosion test:2KV/EN61000-4-4.
V.Application field
IS220UCSAH1A controller area network(CAN-CONTROLLER AREA NETWORK)is a multi-host area network launched by BOSCH for modern automotive applications.Due to its excellent performance,it is now widely used in industrial automation,various control equipment,transportation,medical equipment,construction,environmental control and many other departments.
The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.
We supply goods directly from abroad,without intermediaries,reducing the cost of use.
There is really no medium that can make a difference!!
Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!
If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.
Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.
Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!
1.”Power plant DCS monitoring system”
2.”Intelligent flat tempering furnace system manufacturing”
3.”PLC programmable transmission control system”
4.”DCS distributed control system”
5.”Intelligent fire water suppl
Reviews
There are no reviews yet.