BENTLY 3500/40M 176449-01 is a high-performance monitoring device designed and produced by Bently Nevada.The following is a detailed introduction to the product:
1.Product Overview
BENTLY 3500/40M 176449-01 is often called a front monitor or vibration monitoring displacement module,and is widely used in mechanical equipment monitoring and fault diagnosis in the industrial field.It can monitor the vibration,displacement and other parameters of the equipment in real time,and compare them with the preset alarm value.Once the threshold is exceeded,the alarm system will be triggered to remind the operator to pay attention.
BENTLY 3500/40M 176449-01
2.Technical Features
Multi-channel monitoring:As a 4-channel displacement monitor,BENTLY 3500/40M 176449-01 can monitor the vibration and displacement of multiple devices at the same time,improving the monitoring efficiency.
High-precision measurement:The module has high-precision measurement capabilities,which can accurately reflect the vibration and displacement of the equipment,and provide reliable data support for fault diagnosis.
Programmable alarm:Users can set the alarm delay time through the software according to actual needs,and can configure the input signal of each channel to process it into the required static value.At the same time,each static value can set the warning alarm value and the danger alarm value to meet the safety needs in different scenarios.
Easy to integrate:BENTLY 3500/40M 176449-01 has a simple design and easy installation.It can be easily connected with various sensors and control systems to achieve real-time monitoring and transmission of data.
Good stability:The module has the advantages of small size,good stability and excellent linearity,and can operate stably for a long time in harsh industrial environments.
III.Application fields
The application fields of BENTLY 3500/40M 176449-01 are very wide,including but not limited to:
Power industry:In power plants and power stations,it is used to monitor the operating status of key equipment such as generators,transformers,bearings,etc.to ensure the reliability and safety of the power system.
Oil and gas industry:It is used to monitor various key equipment such as centrifugal compressors,centrifugal pumps,centrifugal fans,etc.to ensure the stable operation of the production system.
Chemical Industry:In the chemical industry,it can be used to monitor reactors,centrifuges,mixers and other equipment to ensure the safety and efficiency of the chemical production process.
Manufacturing Industry:Used to monitor various production equipment,such as machine tools,injection molding machines,die-casting machines,etc.,to improve production efficiency and reduce downtime.
BENTLY 3500/40M 176449-01
4.Product parameters(example)
The following are some possible product parameters,but please note that the specific parameters may vary depending on the product batch and configuration:
Input signal:DC voltage,current(determined when ordering or configured by programmer)
Input impedance:current impedance≤160Ω,voltage impedance≥250KΩ
Input current/voltage:≤30mA/≤7V
Output signal:4-20mA,0-10mA,0-20mA,1-5V,0-5V,etc.
Output load:current type≤500Ω,voltage type≥250KΩ(please specify when ordering if higher load capacity is required)
Communication protocol:MODBUS-RTU protocol,RS-485 transmission distance≤1000 meters
Power supply:DC24V(±10%),AC100-265V 50-60Hz
Power consumption:DC24V power consumption≤1.5W,AC100-265V power consumption≤2W
Operating temperature:0~50℃
Relative humidity:≤85%RH
Installation method:35mm DIN rail installation
The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.
We supply goods directly from abroad,without intermediaries,reducing the cost of use.
There is really no medium that can make a difference!!
Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!
If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.
Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.
Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!
1.”Power plant DCS monitoring system”
2.”Intelligent flat tempering furnace system manufacturing”
3.”PLC programmable transmission control system”
4.”DCS distributed control system”
5.”Intelligent fire water suppl
Reviews
There are no reviews yet.