GE IC670PBI001

## Product Details for GE IC670PBI001

The GE IC670PBI001 is a Field Control Profibus Bus Interface Unit manufactured by GE Fanuc. It enables communication between a Series 90-30 Programmable Logic Controller (PLC) and Profibus DP (Decentralized Peripherals) field devices. The IC670PBI001 facilitates the exchange of data and control signals between the PLC and Profibus devices, allowing for integrated control and monitoring of industrial automation systems.

**Key Features:**

* **Profibus DP Slave Interface:** The IC670PBI001 acts as a Profibus DP slave device, adhering to the Profibus DP communication protocol and responding to commands and data requests from a Profibus DP master device (typically a PLC).

* **Data Exchange:** The module enables the transfer of data between the PLC and Profibus devices, supporting both cyclic and acyclic data exchange. Cyclic data exchange involves the regular transmission of pre-defined data points, while acyclic data exchange allows for more flexible and event-driven data communication.

* **Control Signal Transmission:** The IC670PBI001 facilitates the transmission of control signals from the PLC to Profibus devices, enabling control of actuators, valves, and other field equipment.

* **Robust Design:** The module is designed for industrial environments, featuring durable construction and protection against electrical noise and interference.

**Technical Specifications:**

* **Bus Type:** Profibus DP

* **Data Rate:** 12 Mbps

* **Node Address Range:** 0 to 15

* **Communication Protocol:** Profibus DP Slave

* **Power Supply:** 24 VDC

* **Operating Temperature Range:** -20°C to +60°C (-4°F to 140°F)

* **Storage Temperature Range:** -40°C to +85°C (-40°F to 185°F)

* **Dimensions (L x W x H):** 7.9 x 3.1 x 1.5 in (201 x 79 x 38 mm)

* **Weight:** 1.3 lb (0.6 kg)

**Applications:**

The GE IC670PBI001 is commonly used in various industrial automation applications involving Profibus DP communication, including:

* **Manufacturing:** Integrating Profibus DP devices into manufacturing control systems for machine control, process monitoring, and data acquisition.

* **Process Control:** Enabling communication between PLCs and Profibus DP sensors, actuators, and controllers in industrial process control applications.

* **Building Automation:** Integrating Profibus DP devices into building automation systems for HVAC control, lighting control, and energy management.

**Additional Information:**

* The GE IC670PBI001 is compatible with GE Series 90-30 PLCs and Profibus DP devices from various manufacturers.

* The module requires programming using GE Fanuc’s PLC programming software to configure its Profibus DP settings and data communication parameters.

* For detailed installation, configuration, and programming instructions, refer to the official GE Fanuc IC670PBI001 user manual.

**Please note:** The information provided here is based on publicly available information and may not be entirely accurate. For complete and up-to-date information, please refer to the official GE Fanuc product documentation or contact GE Fanuc customer support.

I hope this helps! Let me know if you have any other questions.

GE IC670PBI001

GE IC670PBI001