IC698CPE020 GE Central Processing Unit Module

Product Description

The IC698CPE020 GE central processing module serves as the core component of the PACSystem RX7i programmable automation controller,responsible for processing and executing control logic.

feature

Equipped with a 700MHz Pentium III floating-point microprocessor.

Integrate 10MB of user memory and 10MB of non-volatile flash memory.

Supports multitasking and programming functions.

Has strong durability and reliability,suitable for industrial environments.

IC698CPE020 is a central processing unit(CPU).It is currently part of the PAKS system RX7I platform produced by General Electric Intelligent Platform(GEIP)under the Emerson automation system.This CPU is a rack mounted device equipped with a 700 MHz Pentium III microprocessor,10 megabytes of battery supported user memory,and 10 megabytes of non-volatile(flash)memory.For discrete%I and%Q,the maximum IO memory of the CPU can be configured to 32k bits,and for analog%AI and%AI,each can be configured to a maximum of 32k words.It is equipped with two(2)Ethernet communication ports that support 10/100Mbps data rates,two(2)isolated serial ports that support RS232 and RS45 standards,and another RS232 Ethernet website manager port.

IC698CPE020 is a rack mounted central processing module(CPU)derived from Emerson Automation’s PACX7I programmable automation controller platform,previously operated by General Electric Intelligent Platform(GEIP).This CPU module is mainly used to process downloaded user programs to execute and drive connected electrical loads.

The IC698CPEP020 comes with a Pentium III,700 MHz microprocessor that integrates 10 megabytes of user memory and 10 megabytes of non-volatile or flash memory.It has I/O memory for processing up to 32 kilobits of discrete%I and%Q data,as well as up to 32K of analog%AI and%AI data.Up to 512 program blocks can be downloaded to this processor,each with a maximum block size of 128kb.

This CPU has two built-in Ethernet ports that support a transmission rate of 10/100Mbps and are compatible with Ethernet global data.It uses SRTP’s trade data exchange system/trade data exchange system/trade data exchange system communication services,MOBUS/trade data exchange system server,MOBUS/trade data exchange system client,and can also serve as the main programming and configuration port.These Ethernet ports are embedded switching ports that only require an Ethernet I/P address.With a CPU release of 0.5 or later,these CPU ports can be used for time synchronization.

In addition to the Ethernet port,this module also has three isolated serial ports that support RS232 and RS485 standards.Two(2)serial ports can be used for data communication as they are compatible with MODBUS real-time ports,SNPs,and serial I/O.The remaining serial ports serve as Ethernet website management ports.

IC698CPE020 is equipped with upgraded firmware with integrated data monitoring capabilities.It has a total of 16 web servers and FTP connections.

The GE FANUC IC698CP020CPU is a central processing unit of the RX7I series performance controller,designed to provide flexible applications on multiple hardware platforms.A fully programmed and configured IC698cpe020 CPU can control applications and machine processes in real-time,and communicate with multiple I/O devices on the rx7i backplane.The IC698CP020CPU is built using the VME64 architecture,which supports various VME embedded technologies and has fast data throughput.It can communicate with a series of human-machine interface devices through embedded Ethernet ports.The ic698cpe020 CPU is equipped with a 700 MHz Pentium III microprocessor,10 megabytes of memory,and 10 megabytes of non-volatile flash memory for storing user data and programs.The icc698cp020CPU can execute both floating-point mathematics and Boolean functions simultaneously,and it supports user application programming through the use of ladder diagrams,C,function diagrams,and structured text programming languages.

The General Electric FANUCIC698CPE020 CPU supports up to 512kb of program blocks and has a reference data table that includes 32 kilobytes of%I and%Q discrete data,as well as up to 32 kilograms of%AI and%analog data.The IC698CP020 CPU is located in slot 1 of the RX7 I/O rack,and its maximum backplane current ripple is 3.2 amperes at 5 volts DC voltage.It has three rear serial ports,namely RS-485 port,RS-232 port,and RS-232 management port,as well as a dual embedded Ethernet port that supports high-speed trade agreement/IP communication.The IC698CPE020CPU also supports MODBBSTU slave,SNP,and serial I/O communication protocols.The IC698CPE020 CPU configuration uses the Profiki machine version logic developer PLC software,which is version 4.0 or later.

application area

The IC698CPE020 GE central processing module is used in industrial automation systems to control production processes,mechanical equipment,and manufacturing lines.