Ds200rtbag2afb Ge relay terminal board

Product description

The ds200rtbag2afb Ge relay terminal board realizes logic control and signal distribution,transmits the instructions of the main controller to the corresponding actuator,and receives the feedback signals of each sensor at the same time.

feature

Provide safe and convenient connection for relay

Designed for compatibility with Ge equipment

Durable and reliable structure

Ds200rtbag2afb Ge relay terminal board is a high-quality terminal board specially designed for GE equipment.It allows easy and efficient connection of relays in industrial automation systems.With its reliable performance and durable structure,it ensures the smooth and accurate operation of the electrical control and monitoring system.

The ds200rtbag2afb model is a relay terminal board designed by General Electric for the Mark V ds200 series.This model uses 24 VDC when powered on.The rtba model has two main connectors,a 16 pin connector and a 2-pin connector.

Ds200rtbag2afb is a relay terminal board(rtba)specially designed for GE Mark V board series.The board can be used in a variety of Ge brand driver and exciter applications.By installing the board into the drive cabinet,the user can be provided with ten additional relays.Both LAN i/o terminals and remote users can drive the relays on the board.

Positions K20 to k29 are the board positions of all on-board relays.The ds200rtbag2afb includes two types of relays:DPDT and 4PDT.The DPDT type contains seven relays on the card,including K20 to k26.These types have two type C contacts,each rated at 10A.K27 to k29 are the second relay type,4PDT.The 4PDT relay consists of four C-type contacts instead of two,and the current value of each contact is 1a.All ten points are protected by a 130 VAC metal oxide varistor(MOV).Each relay contains an internal 110 VDC coil to ensure their proper operation.If any relay stops working or is damaged,the user can easily remove and replace all ten points.

The ds200rtbag2afb model has two connectors;One is a 16 pin connector and the other is a two pin connector.The sixteen pin connector is marked as RPL,and the two pin connector is marked as optpl.The optpl connector has two nomenclature x2 and cfx1.X2 nomenclature sends the signal back to cfx1 nomenclature ntb/3tb board with 120 VAC load.This nomenclature is the same as RPL x2 nomenclature.For all terms available for both connectors,refer to tables 3 and 4 in the gei-10016b manual.

application area

The ds200rtbag2afb Ge relay terminal board is usually used in industrial environments such as manufacturing plants,power generation facilities and transportation systems.In these applications,accurate and reliable relay control and monitoring are essential.