IC698PSA100D GE power module

Status: In Stock

Model:IC698PSA100D

Brand:GE

Manufacturer:GE FANUC

Series:Rx7i PAC system

Product Description

The IC698PSA100D GE power module provides stable power supply for other modules or devices.

feature

Reliable and efficient power supply

Designed specifically for compatibility with GE systems

Compact and space saving design

Easy to install and maintain

IC698PSA100D is a power module that is part of the PACSystem RX7i platform.It is currently under Emerson Automation and was previously produced by GE Intelligent Platform(GE IP).This power supply is installed on the RX7i universal backplane.Its input voltage range is 85 to 264 VAC,47 to 63 Hz,and 100-150VDC,with a maximum input power of 125 watts(typical value)and 150 watts(maximum value).The maximum output power of all three(3)outputs(such as 5 VDC,12 VDC,and-12 VDC)is 100 watts,with output currents of 0-20 amperes,0-2 amperes,and 0-1 amperes,respectively.

IC698PSA100 is a PACSystem RX7i power module manufactured by Emerson Automation(formerly part of GE Intelligent Platform(GE IP)).This power module is installed in the leftmost slot of any RX7i standard rack,especially slot 0.It is equipped with screw type input terminals,designed for input voltage ranges of 85 to 264 VAC(nominal voltage 120/240 VAC),frequencies of 47 to 63 Hz and 100-150VDC(nominal voltage 125 VDC).External power connections must use AWG#16(1.3 mm2)solid copper wire or twisted copper wire with an insulation grade of 75°C(167°F).For grounding connections,please use#12(3.3 mm2)copper wire with insulation grade of 75°C(167°F).Proper termination of grounding connections can significantly eliminate(if not present)system noise.

The maximum output power of IC698PSA100D is 100 watts,which is the total power of all three(3)output terminals and can provide 4.875 to 5.25 volts,0-20 amperes,5.1 VDC(nominal value);11.64 to 12.6 volts,0-2 amperes,+12 VDC,nominal value and-12.60 to-11.64 volts,0-1 amperes,-12 VDC,nominal value.The riding time(minimum)of this power module is 15 milliseconds,and the holding time(minimum)is 5 milliseconds.It also has active overvoltage and overcurrent limitations,especially overvoltage protection of 5.7 to 6.7 volts at+5VDC+21A at 5 VDC output+2.5A at 12 VDC output and 3.5A at-12 VDC output.

The operating temperature of this power module is from 0°C to 60°C(32°to 140°F),with an isolation rating of 1500 VDC.

The IC698PSA100D power module is a modern power module manufactured by GE for the Rx7i PACsystem.Its nominal rated voltage is 120/240 volts AC or 125 volts DC.The input voltage range of the power supply is 85 to 264 volts AC or 100 to 150 volts DC.The power module is located in the leftmost slot or slot 0 of the Rx7i system backplane.The rated power of this module is 125 watts.Its output voltage is 5 V DC,12 V DC,and-12 V DC.The IC698PSA100D power module sends logic level signals to the module through the system backplane.The power module has been enhanced in terms of safety protection.It can prevent overcurrent,over temperature,and over voltage situations.

The IC698PSA100D power module is equipped with a switch located on the front of the power supply.It helps to enable or disable output channels and does not interfere with AC line inputs.There are LED indicator lights on the power module,which will remind the operator to pay attention to different things.The LED indicator lights are”normal on site”,”normal output”,and”over temperature”.The minimum power factor of the IC698PSA100D power module is 0.99.The isolation voltage in the module is 1500 volts DC.This power supply can also provide a 15 millisecond ride through time without affecting the DC output,and a 5 millisecond hold time when the DC output is interrupted.The IC698PSA100D power module requires an operating temperature range of 0 to 60 degrees Celsius.This module has been certified to run in a Class 1 Division 2 environment.

technical specifications

Nominal rated voltage:120/240V AC or 125V DC

Input voltage range:85 to 264 VAC or 100 to 150 VDC

Input power:125 watts

Output voltage:+5 VDC,+12 VDC,or-12 VDC

Module type:Power supply

Rack position:Slot 0(leftmost slot)

application area

The IC698PSA100D GE power module is widely used in various automation control systems and industrial equipment to provide reliable power supply and ensure the normal operation of other modules or equipment.

IC698PSA100D GE power module插图

    Reviews

    There are no reviews yet.

    Be the first to review “IC698PSA100D GE power module”
    Review now to get coupon!

    Your email address will not be published. Required fields are marked *

    Back to Top

    Search For Products

    Product has been added to your cart