CFP-CB-1 NI Integrated Connector Block

Product Description

CFP-CB-1 NI integrated connector block is an integrated connector block used for electrical connections.

feature

37 pin D-type submarine connection

36 screw terminals

4 Build In CJC

250V voltage limit

The national instrument CFP-CBB-1 integrated connector block is suitable for any I/O module and is a universal connector block with strain relief function.There are 36 terminals,and the connector block simplifies the wiring by eliminating the need to connect multiple terminals.CFP-CBB-1 also comes with a separate wire pull connector,making it easy to create safe wiring devices for high impact and vibration applications.

CFP-CB-1(Part Number:778618-01)is an integrated connection block used to connect compact field point I/O.If it board the back seat of the aircraft,then cFP-CB-1 provides a favorable method for interface sensors and actuators The national document holds a link ring for linking,used as a security tool,and holds a terminal encoding for low requirement access links.When used together with thermocouples,it also has a thermistor for cold junction compensation.This device is universal and designed to withstand hazardous voltage operations.Its terminals are connected to 16-26 dedicated working group copper wires(except when working with sensors),with a 6mm insulation layer peeled off from one end.

The compact on-site thermocouple input module can measure the terminal temperature connector block.These modules use this estimation called cold junction temperature to compensate for the thermoelectric voltage generated by these intersections.For the most accurate cold junction compensation,scattering from adjacent modules(or different heat source wellbore)can lead to errors in thermocouple estimation through warming terminals-the device is equipped with 36 screw terminals.The warm angle generated on the terminal can result in different temperatures for terminals in different channels.The actual thermal angle depends on the connector grid used and the subtle elements established by the user.To limit the warm angle of the terminal,CFP-CB-1 is used for interface thermocouple signals.CFP-CB-1 describes a similar development to maintain terminals at the same temperature.The recommended operating temperature range for this device is-40~70℃,and the storage temperature range is-55~85℃.

The maximum current at the V and C terminals of CFP-CB-1 is 4A,while the maximum current at other terminals is 2A.

A integrated connector block for each compact on-site I/O module.This model has tension discharge and coordination depression for connecting connections,as well as shadow encoding that is easily associated with voltage and normal correlation with terminal connections.It is equipped with a 37 pin I/O connector.This device weighs 7.1 ounces.,The maximum cable diameter is 8 millimeters.

application area

The CFP-CB-1 NI integrated connector block can be used in industries such as telecommunications and consumer electronics