Product Description
The ANC-100E AN-X2-AB-DHRIO Automation converter connects the Ethernet/IP network to the DH+network,enabling data transmission and signal conversion.
feature
Allow communication between Ethernet/IP and DH+networks
Easy to install and configure
Reliable and efficient data transmission
The ANC-100E AN-X2-AB-DHRIO automation converter is designed to facilitate communication between Ethernet/IP and DH+networks.It achieves seamless integration and data exchange between devices using these protocols.
ANC-100e is a compact,high-performance,industrial grade Ethernet DH+to USB converter and data highway to Ethernet converter,USB to DH+.Its features include:easy configuration through web interface and DH+automatic polarity detection and DH+automatic baud rate detection.
The design of AN-X2-AB-DHRIO gateway is to assist customers in initiating phased migration methods to replace or upgrade traditional remote I/O PLCs,HMI,drivers,or Flex I/O adapters.These solutions can be implemented by selecting the corresponding operating mode during the initial configuration period.AN-X2-AB-DHRIO has a built-in web server that can display diagnostic data,configure,upload configuration files,and set operating modes.
The EtherNet/IP to Remote I/O or Data Highway Plus DH+(AN-X2-AB-DHRIO)gateway is designed to assist customers in initiating phased migration methods to replace or upgrade traditional remote I/O,HMI,or drives.The AN-X2-AB-DHRIO gateway has multiple operating modes selected during initial configuration,as described below.
This mode serves as a bridge between EtherNet/IP and DH+Data Highway Plus networks.
*Programming terminals and/or processors on EtherNet/IP networks can access legacy processors on the Data Highway Plus DH+network
*Download to PLC5 or SLC through RSLinx
*Configure through a web browser and support all Data Highway Plus DH+baud rates(57.6,115.2,and 230.4 K baud)
*Communication must be initiated from the EtherNet/IP side,DH+messages cannot be sent to EtherNet/IP devices
*Support DH+to EtherNet/IP PanelViews upgrade on PLC5 or SLC networks
ANC-100e,RSINX Ethernet/IP to Allen Bradley data highway plus(DH+)gateway converter series,replacing Prorand An2-ab dhrio.ANC-100E is an economical and high-performance,”pocket”converter interface for factory automation equipment Ethernet/IP and the Allen Bradley data highway with DH+between PLC-5S and SLC-504S.
application area
The ANC-100E AN-X2-AB-DHRIO Automation converter is widely used for converting Ethernet/IP networks to DH+networks.Therefore,it may be applied in any field that requires the conversion of these two network protocols,including but not limited to industrial automation,process control,data monitoring,and other fields.
Reviews
There are no reviews yet.