IC660BBA104 6231BP10910 GE Current Source Analog I/O Block

Status: In Stock

Model:IC660BBA104 6231BP10910

Brand:GE

Manufacturer:GE

Series:Rx7I Respiratory System

Weight:4 pounds

Product Description

IC660BBA104 is a current source analog I/O block that can be used in various industrial applications.

feature

Reliable and accurate current source

Wide range of current output options

Easy to integrate with existing systems

General Electric FANUCIC60BA106 is a frequent source analog input and output block.This module consists of six(6)circuits,consisting of four(4)4-20MA input channels and two(2)4-20MA output channels.It is an external power supply voltage of 115VAC with a separate isolated input channel.

IC660BBA104 is a flow source combination I/O block with six(6)input circuits,consisting of four(4)analog input channels,capable of receiving 4-20mA signals and two(2)output channels,transmitting 4-20mA signals.In addition,the module also has input channels for group isolation,group isolation,and group isolation,rated at 1500V.

The specific characteristics of the IC660BBA104 input channel are:a full scale reading accuracy of 0.1%at 25 degrees Celsius,a resolution of 16.6MS to 400MS for 1a,and a user configurable conversion time of 16.6M to 25MA.Each input channel is designed with a single diagnosis,such as low/out of range,high/low alarm,and open line detection.

The accuracy of the IC60BBA104 output channel is 0.15%of the full scale reading,with a resolution of 6 times.The typical update frequency for each channel is 6 to 8M,exceeding 0-24MA.Similar to the input channel,each output channel can perform internal diagnostics such as low distance,out of range,and feedback errors.

The external power supply of IC660BBA104 is supplied by a nominal input of 115VAC.Its physical measurement value is 8.83″(22.44 cm)x 3.34″(8.48 cm)x 3.91″(9.93 cm),weighing 4 pounds.(1.8 kg).This I/O module needs to be installed on an enclosure that provides sufficient protection for the device.The I/O module supports right side up and down mounting and must provide all aspects of a 2(2)inch gap to promote sufficient air flow and natural cooling.

The current source I/O block of General Electric IC660BA104 has a 1500 volt blocking isolation for 1 minute,1500 volt group to group isolation,and 1500 volt input channel to channel isolation.It is compatible with PCIM modules,Qbim modules,and all General Electric Genius Bus controllers.It has a programmable conversion time to combine the level of noise rejection and input resolution.Users can choose a longer conversion time to increase input resolution.The independent output circuit is isolated from all other circuits within the block.The output channel uses a dual 12 bit digital to analog converter,while the control current is independent within the range of 0 to 240000 amperes.The current source I/O block of IC660BA104 with a handheld monitor can be easily configured by entering the device number/serial bus address and reference number.When the block is configured offline,make sure to connect a 75 ohm resistor to the serial 1 and 2 terminals.

technical specifications

Scale voltage:115 VAC/125 VDC

Points:4 inputs/2 outputs

Input range:4 to 20 horses

Output range:4 to 20 horses

Working voltage:93-132 VAC/105-145 VDC

Common points:1 set of 4 inputs and 1 set of 2 outputs

application area

IC660BBA104 is commonly used in industries such as manufacturing,automation,and process control.

IC660BBA104 6231BP10910 GE Current Source Analog I/O Block插图

    Reviews

    There are no reviews yet.

    Be the first to review “IC660BBA104 6231BP10910 GE Current Source Analog I/O Block”
    Review now to get coupon!

    Your email address will not be published. Required fields are marked *

    Back to Top

    Search For Products

    Product has been added to your cart