GE IC697BEM731

GE IC697BEM731

GE IC697BEM731 is a GE Fanuc series module that is a high-speed Ethernet module used for communication with other devices. The following are its parameter specifications:

1. Communication rate: 10/100 Mbps

2. Communication protocols: TCP/IP, UDP/IP, ICMP/IP, ARP, IGMP, HTTP, SNMP, FTP, SMTP, Telnet, DHCP, BOOTP, RARP, etc

3. Supported network topologies: star, bus, ring

4. Supported connection methods: direct connection, switch connection, router connection

5. Maximum number of nodes supported: 64

6. Maximum supported data transfer rate: 100 Mbps

7. Working temperature range: 0-60 ℃

8. Working voltage range: 5VDC

9. Size: 3.5 x 12.5 x 16.5 cm

10. Weight: 0.2 kg

The GE IC697BEM731 is a Bus Controller module from the GE Fanuc RX7i series. It provides a high-speed serial bus interface between the RX7i PLC and other devices such as I/O modules, operator interfaces, and other controllers. The module supports the Profibus DP protocol and can be used in a variety of applications, including process control, manufacturing, and automation. It has a maximum data transfer rate of 12 Mbps and supports up to 125 nodes on the network. The IC697BEM731 module is designed for use in harsh industrial environments and is rated for operation in temperatures ranging from -40°C to 70°C.

2 x BURLE 8122 Linear Beam Power Tube LOT OF TWO 8122

Wincor Nexdorf FPCI16WB/G ATM PCI Series II

BELPA HARDERWIJK FOR PHILIPS INTEGRIS V3000 RKT 108.5

STOCKER&YALE LITE MITE 13 PLUS STEADY LITE CONTROLLER

STOCKER&YALE MODEL 13 STEADY LITE CONTROLLER+MORE

BEAM REMOTE SATELLITE TERMINAL RST100 DISPLAY UNIT

Fanuc A06B0128B075 A06B-0128-B075 0.9KW+Warranty 90D

HP EIO Hard Drive C2985B 3.25gb C2985-60008+more Siml

Siemens SIMODRIVE 611 6SN 1123-1AA00-0DA0 MORE AVAILABL

The GE IC697BEM731 is a Bus Interface Module (BIM) that is used in the GE Fanuc Series 90-70 PLC system. It provides a communication interface between the PLC and other devices on the network, such as I/O modules, operator interfaces, and other PLCs.

The IC697BEM731 supports both Genius and Profibus DP protocols, allowing it to communicate with a wide range of devices. It has two serial ports, one for each protocol, and supports up to 32 devices on each network.

The module has a maximum data transfer rate of 12 Mbps for Profibus DP and 1 Mbps for Genius. It also has a built-in watchdog timer to ensure reliable communication.

Other features of the IC697BEM731 include:

• LED indicators for power, communication status, and fault status
• Hot-swappable design for easy replacement without interrupting the system
• Support for both master and slave modes
• Configuration via software or DIP switches