GE IC693CMM302

GE IC693CMM302

The GE IC693CMM302 is a communication module from the GE Fanuc Series 90-30 PLC (Programmable Logic Controller) family. This module is designed to facilitate communication between the PLC and various devices and networks. Below is some product information and parameters for the GE IC693CMM302:

Product Information:

1. Product Name: GE IC693CMM302 Communication Module
2. Series: Series 90-30
3. Manufacturer: GE Fanuc (now part of Emerson)
4. Communication Protocols Supported: This module supports multiple communication protocols, including:
   • SNP (Serial Network Protocol) for GE Fanuc PLCs
   • SNPX for enhanced SNP communications
   • SRTP (Serial Real-Time Protocol) for Ethernet-based communications
   • Modbus RTU and Modbus ASCII
   • DNP3 (Distributed Network Protocol)
   • User-defined protocols
5. Communication Ports: The module typically has one RS-232 port and one RS-485 port for serial communication. Additionally, it may have an Ethernet port for TCP/IP-based communication.
6. Configuration: The module can be configured using GE’s programming software (such as Proficy Machine Edition) to establish communication links, set communication parameters, and define data exchange between the PLC and external devices.

The GE IC693CMM302 is a communication module used in the GE Fanuc Series 90-30 PLC system. It provides a high-speed communication link between the PLC and other devices such as computers, HMIs, and other PLCs. The module supports multiple protocols including Ethernet, TCP/IP, and Modbus TCP. It has two Ethernet ports for redundancy and supports up to 64 connections. The IC693CMM302 module is easy to install and configure, and it provides reliable communication for industrial automation applications.

Cyclone Microsystems CVME964/CY964 VME CPU,Memory Board

XYCOM DIGITAL I/O MODULE VME CONTROL CARD XVME-202

Sopha Medical Systems Memory VME Plug-In Board

National Instruments NI GPIB-1014 VME Board HP-IB

PIEZO DRIVE CARD W/FB AUTOFOCUS MEASUREMENT VME BOARD

MICRO MEMORY MM-6500 VME BOARD MM6500

GILLESPIE,D/GET​Z,S DIZ&GETZ:VME(BONUS TRACKS)(RMS)

Vector 3690-27 VME Extender Board

Parameters:

The parameters for configuring the GE IC693CMM302 module may include:

1. Communication Protocol Settings: You would specify which communication protocol you want to use (e.g., SNP, SRTP, Modbus, etc.) and configure the associated settings like baud rate, data bits, stop bits, and parity.
2. IP Address and Port (if applicable): If you are using Ethernet communication, you would set the module’s IP address and port number for TCP/IP communication.
3. Data Exchange Configuration: You would define how data is exchanged between the PLC and other devices. This may involve setting up data tables, registers, or memory locations for reading and writing data.
4. Timeouts and Retries: Parameters for specifying timeout values and retry attempts for communication with external devices.
5. Error Handling: Configuration options for handling communication errors, such as what action to take in case of a communication failure.
6. Security Settings (if applicable): If the module supports security features, you may configure settings for user authentication and data encryption.
7. Diagnostics: Monitoring and diagnostic parameters to check the health and status of the communication module.

It’s important to note that the specific parameters and configuration process may vary depending on the software and programming environment you are using with the GE IC693CMM302 module. Refer to the module’s user manual or documentation for detailed instructions on configuring and using the module in your specific application.