A-B 1784-KT

A-B 1784-KT

The A-B 1784-KT is a communication interface module manufactured by Allen-Bradley (A-B). It is designed to provide a communication link between a ControlLogix controller and a device or network using the DeviceNet protocol. The module supports up to 64 nodes on the network and can be used for both input and output data transfer. It features a compact design and can be easily installed in a ControlLogix chassis. The 1784-KT module is commonly used in industrial automation applications for monitoring and controlling various processes.

RECONDITIONED FANUC A20B-0008-0032/03A ORT BOARD

FANUC SERVO AMP A06B-6047-H040(WITH TOP BOARD)

FANUC BOARD A16B-1211-0090/​10D

YASKAWA JANCD-MCP01 REV.D01 BOARD

FANUC I/O BOARD(A20B-1001-0731)

FANUC PCB 15MT(A16B-1212-0301)

FANUC SERVO AMP(A06B-6057-H007)

FANUC PCB 15MT(A16B-1212-0300)

The A-B 1784-KT is a communication module produced by Allen-Bradley, a brand under Rockwell Automation. This module is designed for use with their programmable logic controllers (PLCs) and other automation devices to facilitate communication and data exchange in industrial automation applications. While I can provide some general information about this module, it’s essential to consult the official documentation or contact the manufacturer for the most up-to-date and detailed information, as my knowledge is based on information available up to September 2021.

Here are some general details about the A-B 1784-KT module:

1. Communication Protocol: The 1784-KT module typically supports one or more communication protocols, such as Ethernet/IP, DeviceNet, ControlNet, or other proprietary protocols used in Rockwell Automation systems. The specific protocol(s) supported may vary depending on the model and firmware version of the module.
2. Compatibility: This module is designed to work with Allen-Bradley PLCs and other industrial automation devices, allowing them to communicate and exchange data with other devices and systems within an industrial network.
3. Data Exchange: It enables data exchange between the PLC and other devices, such as Human-Machine Interfaces (HMIs), SCADA systems, sensors, and actuators, facilitating real-time control and monitoring of industrial processes.
4. Configuration: Configuration of the 1784-KT module is typically done through specialized software tools provided by Rockwell Automation, such as RSLogix or Studio 5000. These tools allow users to set up communication parameters, network settings, and other configuration details.
5. Physical Interface: The module may have different physical interfaces depending on the communication protocol it supports. For Ethernet/IP, it may have Ethernet ports, while for other protocols like DeviceNet or ControlNet, it may use specific connectors and cables.
6. Diagnostic and Monitoring: The module often provides diagnostic and monitoring capabilities, allowing users to troubleshoot network issues and monitor the status of communication channels.
7. Firmware Updates: Manufacturers periodically release firmware updates for communication modules like the 1784-KT. Updating the firmware can improve performance, security, and compatibility with the latest hardware and software.
8. Documentation: For detailed information, including specific product parameters, installation instructions, and configuration guidelines, you should refer to the official user manual and datasheet provided by Rockwell Automation or consult their technical support.

Please note that the specific features, specifications, and compatibility of the A-B 1784-KT module may vary depending on the model and firmware version. It’s crucial to consult the documentation that accompanies the module or contact the manufacturer or authorized distributor for precise and up-to-date information for your particular application.