GE IC693MDL655

GE IC693MDL655

The GE IC693MDL655 is a 24VDC positive logic input module for the GE Series 90-30 PLC system. It has 32 input points, arranged in four isolated groups of eight points each. The module is designed to accept a wide range of input signals, including AC or DC voltage, contact closure, and TTL/CMOS logic levels. Each input point is protected against overvoltage and short-circuit conditions. The module is hot-swappable, meaning it can be replaced without powering down the system. It is commonly used in industrial automation applications to monitor the status of sensors, switches, and other devices.

Agilent HP 11664D 26.5-40 GHz Scalar Coaxial Detector

Agilent/HP 4140B pA Meter/DC Voltage Source

Tektronix 3056 Real Time DC to 3 GHz Spectrum Analyzer

Agilent HP 85021B Directional Bridge10MHz to 26.5GHz

Agilent HP 85033D opt.100 Calibration Kit,3.5 mm

Fluke 5450A Resistance Calibrator with warranty

Racal-Dana 1992 Timer/Counter 1.3 GHz w/warranty

Fluke/Philips PM6669 Timer/Counter 120MHz/1.3 GHz

The GE IC693MDL655 is a digital AC Output module from the IC693 PLC series. It is designed to provide a high-performance output interface for the GE 90-30 series PLCs. The module has eight outputs, each capable of providing a maximum of 1.0 A (5.0 A RMS for resistive loads) at 120/240 volts AC.

The IC693MDL655 module is designed to be used in a variety of industrial applications that require reliable and accurate control of AC devices. It can be used to interface with devices such as solenoids, motor starters, and other AC-powered devices.

Some of the key features and parameters of the IC693MDL655 module are as follows:

• Eight outputs: The module has eight independent output points, each with a load rating of 1.0 A (5.0 A RMS for resistive loads). The outputs are wired as sourcing (common negative) configuration.
• Voltage range: The module is designed to work with a wide range of voltage inputs, including 120 volts AC and 240 volts AC. The input voltage can be selected through a jumper located on the module.
• I/O compatibility: The IC693MDL655 module is fully compatible with other modules in the GE 90-30 series PLCs. It can be easily incorporated into existing I/O configurations without any major reconfigurations.
• LED indicators: The module includes LED indicators for each output point, allowing for easy monitoring of the status and condition of the outputs.
• Surge protection: The IC693MDL655 module features built-in transient voltage surge protection, ensuring reliable operation even in environments with electrical noise and disturbances.
• Wiring convenience: The module utilizes removable terminal blocks for easy and convenient wiring. The terminal blocks can be easily disconnected and reconnected for maintenance or troubleshooting purposes.
• Fault detection: The IC693MDL655 module includes built-in fault detection and reporting mechanisms. It can detect and report various fault conditions, such as open or shorted output points, allowing for easy troubleshooting and maintenance.