FOXBORO FBM207C

FOXBORO FBM207C

The FOXBORO FBM207C is a module designed for use in a distributed control system (DCS) for industrial automation applications. It is a high-speed analog input module that provides 16 channels of differential input with a resolution of 16 bits. The module is capable of measuring a wide range of analog signals, including voltage, current, resistance, and thermocouples. It features advanced diagnostics capabilities, including sensor failure detection and channel status monitoring. The FBM207C module is designed for use in harsh industrial environments and is suitable for applications in the oil and gas, chemical, and power generation industries. It is compatible with several FOXBORO DCS platforms, including the I/A Series and the FBM System.

ABB TAYLOR MOD 300 HIGH SPEED COUNTER

ABB KENT-TAYLOR 64-05-1002-03 RED MKR/20012268***​NIB***

ABB TAYLOR MOD 300 HIGH SPEED COUNTER

ABB TAYLOR MOD 300 HIGH SPEED COUNTER

NIB ABB KENT-TAYLOR 0P6260 RECORDING CHARTS

NEW ABB KENT TAYLOR 175S0008 BATTERY REPLACEMENT KIT

ABB Taylor Circuit Board 500S1096 500S1096 rev BH

The FOXBORO FBM207C is a high-performance, intelligent, and versatile input/output module designed for use in industrial automation applications. It is part of the Foxboro I/A Series system and is used to interface with a variety of field devices such as sensors, transmitters, and actuators.

Some of the key features and parameters of the FOXBORO FBM207C include:

• It has 16 channels, each of which can be configured for either analog input or output.
• The module supports a wide range of input and output signal types, including voltage, current, resistance, and frequency.
• It has a high-resolution analog-to-digital converter (ADC) that provides accurate and reliable measurement of input signals.
• The module is designed to operate in harsh industrial environments and is resistant to shock, vibration, and temperature extremes.
• It supports hot-swapping, which allows modules to be replaced without shutting down the system.
• The module can be configured and monitored using Foxboro’s I/A Series software, which provides a user-friendly interface for configuring alarms, scaling input signals, and monitoring module status.