GE IC697PWR711 is a key component in the GE Fanuc Automation series,mainly used to provide stable power for the 90-70 series programmable logic controller(PLC)system.The following is a detailed introduction to the power module:
1.Basic characteristics
Type:Rack-mounted unit that can be directly inserted into the 48-pin backplane-mounted connector in the leftmost slot of the rack.
Output voltage:Provides+5V,+12V and-12V power supplies and logic level sequencing signals.
Power output:Has a power output capacity of 100 watts(some say the maximum power can reach 150W).
Power supply voltage:Can be powered by 120VAC,240VAC or 125VDC voltage,with a wide working range and adapt to power supply standards in different regions.
2.Technical specifications
Input voltage:AC voltage 85~264VAC,47~63Hz;DC voltage 120~300VDC(data from different sources vary slightly,but are all within a reasonable range).
Output voltage and current:+5VDC,up to a certain current value(such as 10A or 20A,depending on different models or specifications);+12VDC and-12VDC also have corresponding current limits.
Efficiency:Under full load conditions,the efficiency can reach 85%,effectively reducing energy consumption and heat generation.
Protection function:It has multiple protection functions such as overvoltage protection(OVP),overcurrent protection(OCP)and short circuit protection(SCP)to ensure safe and stable operation of the system.
III.Application and installation
Application scope:It is widely used in industrial automation occasions such as manufacturing,power,chemical,metallurgy,and transportation to provide stable power supply for PLC systems and other control equipment.
Installation method:It adopts a slide-in rack installation structure,supports hot plugging,and is convenient for users to quickly install and replace.At the same time,it can also be fixed with M3 screws or directly installed on the DIN46277(35mm wide)rail.
IV.Other features
Wide voltage input range:Improve the compatibility of the equipment and adapt to the power supply standards of different regions.
Compact design:Small size,easy to install in a limited space.
Easy to maintain:Modular design makes maintenance and replacement more convenient.
The company mainly imports PLC modules, programmable controllers, servo control systems and DCS spare parts, such as: ABB, AB (Rockwell), GE (General Electric), Bentley, Honeywell, Emerson, Motorola, Invensys, Westinghouse, etc. The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers, and can directly purchase from abroad, providing equipment and spare parts from different countries and manufacturers.
We supply directly from abroad, without middlemen, reducing the cost of use.
There is really no middleman who can make a price difference! !
If you have any defects or need to import PLC, DCS spare parts, please contact our team, we will help you find reliable and high-quality products super quickly, while shortening the delivery time to ensure that your equipment can operate normally in the right environment. On time.
Professionally provide: PLC programmable control system, distributed control system (DCS), safety instrument system (SIS), ESD system, vibration monitoring system, turbine compressor control system (CCS) and other PLC modules, various industrial control systems, system modules, CPU, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion controller, analog input module, analog output module, switch input module, switch output module, module redundancy, power supply module, relay output unit, relay input unit, processing unit.
Products are widely used in: electricity, petroleum, mine hoisting, ports, heating, gas, water supply, sewage treatment, metallurgy, papermaking, textile, chemical industry, water conservancy and other modern industrial fields!
