GE IC695CPE310-ACAT

GE IC695CPE310-ACAT is a CPU module in the GE Fanuc PACSystem RX3i series.The following is a detailed introduction to the module:

I.Basic Overview

GE IC695CPE310-ACAT is a high-performance CPU module launched by GE(General Electric)for the PACSystem RX3i series of programmable automation controllers(PAC).The module integrates advanced processors,memory,and communication interfaces to meet the needs of various industrial automation and control systems.

II.Technical Specifications

Processor:

Type:32-bit RISC processor(or described as an Atom processor with 1.1 GHz,the specific model may change due to product updates).

Performance:Compared with the 300 MHz Celeron processor in the C695CPU310,the IC695CPE310 processor is faster,about three times faster.

Memory:

Capacity:10 MB(for storing programs and data).

GE IC695CPE310-ACAT

Communication interface:

Embedded Ethernet interface:supports two connections of 10Mb/s and 100 MB/s.

RS-485 and RS-232 serial ports:For serial communication with other devices.

Program block support:

Supports up to 512 program blocks,each up to 128 KB.

Protocols:

Includes Modbus RTU slave,SNP,and serial I/O protocols.

Communicates with human-machine interface(HMI)devices using the SNP protocol.

Power supply:

Input voltage range:Typically 12-48VDC(depending on system configuration).

Output voltage and current:5VDC output,maximum current may vary depending on the specific application(but the general module will have corresponding power supply specifications).

Physical characteristics:

Dimensions:Approximately 170mm x 105mm x 32mm(specific dimensions may vary depending on product version).

Weight:Approximately 120g(specific weight may vary depending on product version and manufacturing differences).

Environmental requirements:

Operating temperature:-20°C to+50°C.

Storage temperature:-40°C to+70°C.

Ambient humidity:5%to 95%relative humidity(non-condensing).

III.Features

High-performance processing capability:

Powerful processor and sufficient memory resources support fast response and execution of complex control logic.

Redundancy support:

Although IC695CPE310 itself is not a redundant CPU module,the RX3i series controller supports redundant configuration,which can improve the availability and reliability of the system.

Rich communication interface:

Provides a variety of communication interfaces for easy integration and data exchange with other devices and systems.

Easy programming and maintenance:

Supports multiple programming languages​​such as ladder diagram,structured text,C or function block diagram,which is convenient for users to program and maintain according to specific needs.

Fault diagnosis and indication:

The LED indicator light with a label on the device housing can display green,red,off or flashing status,improve the efficiency of troubleshooting,and allow users to verify the system status at a glance.

GE IC695CPE310-ACAT

IV.Application field

GE IC695CPE310-ACAT module is widely used in various industrial automation and control system fields,including but not limited to:

Manufacturing:

Used in application scenarios such as automated production lines and robot control.

Process industry:

In the chemical,petroleum,natural gas and other industries,it is used for process control and monitoring.

Power industry:

Used for control and monitoring of power systems such as power stations and substations.

Transportation:

Used for signal control and monitoring in transportation systems such as railways,highways,and aviation.

Other industries:

Automation control systems in industries such as water treatment,food processing,and pharmaceuticals.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl