GE IC660BBD101

IC660BBD101 is an intelligent configurable module manufactured by GE(General Electric),mainly used to connect discrete sensors and actuators to communication buses.The following is a detailed introduction to the product:

1.Basic attributes

Brand:GE(General Electric)

Model:IC660BBD101

Type:115VAC low leakage I/O module

2.Technical specifications

Number of circuits:It has eight identical 115VAC circuits,each of which can be used as an input or output.

Input filter time:Optional,ranging from 10ms to 100ms.

Output feedback:Used for monitoring.

GE IC660BBD101

Output power-on default value:Can be set to hold the last state or default value.

Control power supply:Tapped from the input/output device voltage connected to the terminal,no separate module power supply is required.

Electronic fuse:Each circuit has an electronic fuse,which will close the circuit within 5 milliseconds if the output current exceeds 30 amps when turned on,or exceeds 20 amps after two cycles.

No-load detection:Fault reporting can be enabled or disabled on a circuit-by-circuit basis.

Module dimensions:8.83 inches(22.44 cm)high,3.34 inches(8.48 cm)wide,3.91 inches(9.93 cm)deep.

Weight:4 pounds(1.8 kg).

LED indicators:Used to indicate the status of the I/O block,such as unit identification and enabling I/O.

Block-to-block isolation:1500V.

Heat dissipation:Maximum power is 16 watts when 8 inputs are turned on,and maximum power is 43.5 watts when 8 outputs are turned on,and the current is 2 amps.Standby power(all inputs and outputs turned off)is 8.5 watts.

Operating voltage:Single source 93-132 VAC.

Frequency:47-63 Hz.

Power loss time:1 cycle(16.7 milliseconds at 60 Hz,20 milliseconds at 50 Hz).

III.Functional characteristics

Flexibility:Each circuit can be configured as an input or output,providing great flexibility.

Reliability:With electronic fuse protection,it can automatically shut down the circuit when the output current is too large to protect equipment and systems.

Easy maintenance:The circuit can be easily restored through the instructions of the handheld monitor or the central processor,which reduces the difficulty of maintenance.

Compatibility:It is fully compatible with the handheld monitor IC66HHM501 model and can also be used with IC66HHM500(but HHM501 is required to change the baud rate or configure the module for redundancy).

GE IC660BBD101

IV.Application and Compatibility

Application:The IC660BBD101 module is designed to control small loads without adding parallel load resistance.It is also suitable for installations where factory mutual recognition requires Class 1 Division 2 ratings.

Compatibility:The module is backward compatible with modules IC66CBD100 and BBD100 and can be used to replace them.However,please note that if the terminal assembly is to be used to replace the terminal assembly of IC66TSD100D or earlier,the electronic assembly must be replaced with IC66*EBD101F or later,or upgraded.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!