Month: January 2025

GE IC200GBI001 is a VersaMax communication module.The following is a detailed introduction to the module:

1.Basic attributes

Brand:GE(General Electric)

Model:IC200GBI001

Purpose:Automation control system

GE IC200GBI001

2.Functional characteristics

Genius network interface:This module is a Genius network interface unit that allows VersaMax I/O modules to be installed in a distributed I/O architecture.

Module capacity:Designed to carry up to 8 I/O modules per rack and support up to 8 racks,that is,up to 64 I/O modules.

Transmission speed:Supports 153.6kbaud transmission speed for extended network configuration,standard configuration is 153.6kbaud,76.8Kbaud and 38.4Kbaud.

I/O point capacity:Can accommodate a large number of I/O points,specifically,discrete input can accommodate up to 1024 points,discrete output is also 1024 points;analog input memory and analog output memory are 128 bytes each.

Network Scanning:Can manage network input scanning of 128 bytes per scan and output of 128 bits per scan.

Compatibility:Compatible with a wide range of controller systems,as both previous and modern controller platforms support the Genius protocol.Compatible control systems include the 90-70 Series and PACSystem RX7i and PACSystem RX3i.The appropriate firmware version must be loaded to the controller and the IC200GBI001 Genius network interface module.

Connection Terminals:Equipped with dual Genius connection terminals,the upper terminal is used as the main Genius connection point,while the lower terminal is used as a redundant port.These ports are designed for daisy chain topology connection,with a terminal resistor installed at both ends of the communication cable(appropriate resistance value is 75,100,120 or 150 ohms).

GE IC200GBI001

III.Technical Specifications

Power consumption:250mA 4VDC and 10mA 3.3VDC.

Serial bus address range:from 0 to 31.

Other features:64 analog I/Os,the ability to use fiber optic cables and shielded twisted pair(STP)cables,detachable connectors,and operator diagnostic data available through enhanced diagnostic mode(EDM).

IV.Application Fields

GE IC200GBI001 modules are widely used in CNC machinery,metallurgy,oil and gas,paper printing,textile printing and dyeing,machinery,electronic manufacturing,automobile manufacturing,tobacco,plastic machinery,power plants,water conservancy treatment/environmental protection,municipal engineering,steel mills,cement plants,robots,rail transportation and other fields.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Schneider 140ACI03000 is an analog input module produced by Schneider Electric.The following is a detailed introduction to the product:

1.Product Overview

The 140ACI03000 module is part of the Modicon Quantum PAC series and is designed for industrial automation systems.It is used to receive analog signals from sensors and measuring devices and convert them into digital signals for processing and analysis in the control system.The module has multiple analog input channels and can be connected to sensors,transmitters or other analog signal sources to achieve data acquisition and conversion.

Schneider 140ACI03000

2.Main Features

High precision:The 140ACI03000 module has a 12-bit analog input resolution and can provide high-precision data acquisition and conversion.

Multi-channel input:The module supports multiple analog input channels and can collect signals from multiple sensors at the same time,improving the data acquisition capability of the system.

Wide input range:The module has a wide range of input voltage and current to adapt to different sensors and measuring devices.

High reliability:Schneider Electric is known for its high quality and reliable industrial automation equipment.The 140ACI03000 module also has high reliability and is suitable for various industrial environments.

Easy to integrate:The module communicates with the control system through standard industrial communication interfaces,such as Modbus,PROFIBUS,etc.,which is convenient for integration into existing automation systems.

Schneider 140ACI03000

III.Technical parameters

Number of inputs/power consumption:8-channel input,power consumption is 2W.

Address requirements:9 input words.

Analog input resolution:12 bits.

Absolute maximum input:50V DC,25mA.

Input impedance:250 Ohm current+/-0.01%,or greater than 20MOhm Voltage.

Absolute accuracy error:+/-0.1%maximum full scale;+/-0.05%full scale.

Linearity error:+/-0.04%.

Temperature offset accuracy:<=0.005%full scale/℃;+/-0.0025%full scale/℃.

Common mode rejection:>-72 dB 60Hz.

Fault type:undervoltage range 1~5V;line break 4~20mA.

Required bus current:240mA.

IV.Application areas

The 140ACI03000 module is widely used in industrial control systems,data acquisition and monitoring in automation processes,as well as monitoring and controlling parameters such as temperature,pressure,flow,voltage,current,etc.It is suitable for industries that require continuous operation and efficient cycle time,such as material handling,packaging and textile machinery,etc.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

A-B 1769-PA4 is a PLC power module from Rockwell.The following is a detailed introduction to the product:

1.Product Overview

Model:1769-PA4

Brand:A-B(Rockwell)

Category:PLC power module

2.Product Features

High reliability:Adopt high-quality electronic components and unique circuit design to ensure the stability and reliability of power supply and effectively reduce the failure rate.

Wide voltage range:Supports a wide voltage input range of 90-264VAC to adapt to different power supply environments.

High efficiency and energy saving:With high-efficiency conversion performance,it reduces energy consumption and helps users achieve energy conservation and emission reduction.

Intelligent protection:Built-in overcurrent,overvoltage,undervoltage and other protection functions effectively protect PLC control systems from interference and damage caused by power failure.

Easy to install:Adopt standardized interfaces and specifications to facilitate users to quickly install and configure.

3.Application scenarios

1769-PA4 PLC power module is suitable for various PLC control systems that require stable power supply,especially in industrial automation,process control,machinery manufacturing and other fields.

A-B 1769-PA4

4.Product specifications(may vary depending on the specific product)

Power supply voltage:high voltage

Protection level:IP20,etc.(depending on the actual product specifications)

Other specifications:may include length,width,height,weight,rated power,etc.The specific values​​need to refer to the product sample or technical manual.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB DO820 3BSE008514R1 is a programmable logic controller(PLC).The following is a detailed introduction to the product:

1.Basic attributes

Brand:ABB

Model:DO820 3BSE008514R1

2.Product features

High performance:The PLC has powerful processing capabilities and rich functions,and can meet various complex industrial automation control needs.

Easy to program:Supports multiple programming languages,such as ladder diagrams,function block diagrams,sequential function diagrams,etc.,which is convenient for engineers to program and debug.

Flexible expansion:I/O modules can be expanded according to actual needs,and the number of input and output points can be increased to meet the requirements of control systems of different scales.

High reliability:Advanced hardware design and manufacturing technology are used to ensure that the PLC can operate stably in various harsh industrial environments.

ABB DO820 3BSE008514R1

3.Application scenarios

ABB DO820 3BSE008514R1 is widely used in manufacturing,process industries,infrastructure and other fields,such as machinery manufacturing,chemical industry,petroleum,electricity,water treatment and other industries.In these fields,PLC,as the core component of the control system,is responsible for monitoring and controlling various equipment and process.

IV.Technical specifications and parameters

Input/output points:Depends on the specific configuration and can be expanded.

Power supply voltage:Supports multiple voltage levels,which are selected according to the actual application scenario.

Communication interface:Provides a variety of communication protocols and interface options for easy integration with other devices and systems.

Working environment:Can work in a wide temperature and humidity range,and adapt to various industrial environments.

ABB DO820 3BSE008514R1

V.Installation and debugging

Installation:The PLC should be installed in a dry,ventilated,non-corrosive gas environment,and ensure that it is electrically isolated from surrounding equipment.Relevant electrical safety specifications and standards should be followed during installation.

Debugging:During the debugging process,check whether the input and output of the PLC are normal,whether the communication is smooth,and whether the program is executed correctly.At the same time,the necessary parameter settings and calibration work of the PLC are also required.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Schneider 140DAI75300 is a control processor module produced by Schneider Electric in France.The following is a detailed introduction to the module:

1.Basic properties

Brand:Schneider

Model:140DAI75300

Origin:Imported(specific origin may vary depending on production batches)

2.Functions and applications

Functional features:

This module is part of the Schneider Modicon 140 series and is designed for industrial automation systems.

It has a high-performance processor and rich I/O interfaces to meet complex control needs.

Supports a variety of communication protocols and network options for easy integration with other devices and systems.

Schneider 140DAI75300

Application areas:

Widely used in CNC machinery,metallurgy,oil and gas,paper printing,textile printing and dyeing,machinery,electronic manufacturing,automobile manufacturing,tobacco,plastic machinery,power plants,water conservancy treatment/environmental protection,municipal engineering,steel mills,cement plants,robots,rail transit and other industries.

3.Technical Specifications and Parameters

Motor power:may vary depending on the specific application scenario,but generally the module can support a wide range of motor power requirements.

Dimensions:compact design,easy to install and integrate into various automation equipment.Specific dimensions may vary depending on production batches.

Schneider 140DAI75300

Weight:light and sturdy,suitable for various industrial environments.Specific weight may vary depending on production batches.

Other parameters:such as operating voltage,output frequency,execution quality standards,etc.,may vary depending on specific models and application scenarios.It is recommended to refer to Schneider Electric’s official documents or consult professional technical support for accurate information.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB CI801 3BSE022366R1 is a powerful communication module or tension controller(depending on the application scenario).The following is a detailed introduction to the product:

1.Product Overview

ABB CI801 3BSE022366R1 module is a high-performance communication module produced by ABB.It can also be used as a tension controller to monitor and control tension parameters in the tension system.This module is widely used in industrial automation,manufacturing,energy management and other fields,providing strong support for efficient and accurate production process control.

2.Technical Features

High-speed data transmission:

The module supports Ethernet speeds up to 10/100 Mbps,which can meet the needs of high-speed response.

Flexible network configuration:

Supports multiple network protocols such as TCP/IP,UDP,etc.,providing users with more flexible configuration solutions.

Strong network security:

The integrated network security mechanism protects the security of data transmission and prevents unauthorized access.

ABB CI801 3BSE022366R1

Tension control function(when used as a tension controller):

Used to monitor and control tension to ensure that the material or product on the production line has the appropriate tension level.

Supports multi-channel operation,can monitor and control multiple tension points at the same time,and adapts to different production requirements.

Programmability:

It has a certain degree of programmability to meet the requirements of different application scenarios,and users can configure and customize it as needed.

Real-time monitoring and alarm:

It provides real-time monitoring function,which can detect and respond to tension changes or abnormal conditions in the system in time,and generate corresponding alarms.

III.Product parameters

Product net depth/length:58.5 mm

Product net height:136 mm

Product net width:85.6 mm

Product net weight:0.3 kg

Environmental RoHS status:Comply with EU Directive 2011/65EU

WEEE category:5(small equipment,external dimensions not exceeding 50 cm)

Number of batteries:0

ABB CI801 3BSE022366R1

IV.Application scenarios

Manufacturing:

In the automated production line,the module communicates with various sensors and actuators in real time through the controller to improve the automation and control accuracy of the production line.

Energy management:

The module can be connected to the SCADA system to help monitor and control the operating status of the power grid,oil and gas and water treatment systems.

Warehousing and logistics:

By integrating advanced warehouse management systems,real-time monitoring and data analysis of material flow can be achieved.

Paper and printing industry:

Systems that need to maintain material tension,such as printing machines,coating machines,etc.

Metal processing industry:

Occasions where precise control of tension is required during processes such as stretching and winding.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

HONEYWELL CC-TAID01 is an analog input module.The following is a detailed introduction to the module:

1.Product Overview

The HONEYWELL CC-TAID01 module is a high-performance analog input module produced by Honeywell and is widely used in industrial automation systems.The module can receive analog signals from sensors and convert them into digital signals for further processing and analysis by the control system.

HONEYWELL CC-TAID01

2.Technical Features

High precision:The HONEYWELL CC-TAID01 module has high-precision analog signal acquisition capabilities and can accurately reflect the changes in actual physical quantities.

High resolution:The module uses a high-resolution analog-to-digital converter to capture more signal details and improve the control accuracy of the system.

Multiple input ranges:The HONEYWELL CC-TAID01 module supports multiple input ranges,which can be selected according to actual application requirements to adapt to different sensors and signal sources.

Strong anti-interference ability:The module has strong anti-interference ability and can operate stably in complex industrial environments to ensure accurate signal transmission.

HONEYWELL CC-TAID01

3.Application Fields

The HONEYWELL CC-TAID01 module is suitable for a variety of industrial automation and control system application scenarios,including but not limited to:

Process control:In the chemical,petrochemical,electric power and other industries,it is used to monitor and control the simulation parameters in various industrial processes,such as temperature,pressure,flow,liquid level,etc.

Environmental monitoring:used to monitor environmental conditions,such as gas concentration,humidity,light intensity,etc.,to provide data support for environmental protection and energy management.

Equipment monitoring:Monitor the operating status of equipment,such as motor speed,vibration,temperature,etc.,to promptly detect and handle equipment failures,and improve equipment reliability and service life.

Laboratory testing:Conduct various tests and experiments in scientific laboratories to monitor parameters such as temperature,pressure,pH value,etc.in chemical reactions,and provide accurate data for scientific research and experiments.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

FOXBORO FCM10E is a fieldbus communication module produced by Foxboro.This product is widely used in the field of industrial automation.The following is a detailed introduction to FOXBORO FCM10E:

I.Product Overview

The FOXBORO FCM10E fieldbus communication module is a communication interface that allows a fieldbus module(FBM)mounted on a DIN rail to communicate with an I/A series control station via a high-speed,optionally redundant 10Mbps Ethernet backbone fieldbus.It is able to convert the 10Mbps Ethernet signal used by the control station to the 2Mbps signal used by the FBM,and vice versa.

II.Product Features

Communication function:

The FCM10E module supports high-speed Ethernet communication and provides a transmission rate of 10Mbps.

It can achieve seamless connection with the I/A series control station and meet the communication needs in the field of industrial automation.

Signal conversion and isolation:

The Ethernet signal of the control station can be converted to the signal used by the FBM,and vice versa.

Provides electrical isolation between the 10Mbps Ethernet backbone fieldbus and the 2Mbps module fieldbus to enhance the stability and security of the system.

FOXBORO FCM10E

Redundant design:

FCM10E modules are used in pairs to achieve redundancy,improve system reliability and fault tolerance.

Environmental adaptability:

Compact design,with a rugged extruded aluminum exterior to provide physical protection for the circuit.

Chassis designed for mounting DIN rail FBM devices,providing varying degrees of environmental protection up to the harsh environments specified by ISA standard S71.04.

Power requirements:

Input voltage range is 24V DC+5%,-10%.

Power consumption is 7 watts(maximum)at 24 V DC.

Wide application:

Can be used in simulation,instrumentation,industrial control,process control and monitoring,factory automation and other fields.

Suitable for intelligent networked PLC controllers,automatic testing,data acquisition and other application scenarios.

III.Technical specifications

Physical dimensions:

Height:102 mm(4 inches),114 mm(4.5 inches)with mounting ears.

Width:45 mm(1.75 inches).

Depth:104 mm(4.11 inches).

Environmental specifications:

Operating temperature:-20 to+70°C(-4 to+158°F).

Relative humidity:5 to 95%(non-condensing).

Altitude:-300 to+3,000 meters(-1,000 to+10,000 feet).

Storage temperature:-40 to+70°C(-40 to+158°F).

Storage relative humidity:5 to 95%(non-condensing).

Storage altitude:-300 to+12,000 meters(-1,000 to+40,000 feet).

I/O connections:

Equipped with signal connectors for fieldbus,power supply and I/O cable connections.

One baseboard can support up to eight FBMs,or a combination of FBMs and FCMs.

Performance parameters:

Equipped with a high-performance 32-bit microprocessor to ensure fast response and efficient data processing capabilities.

Built-in large-capacity memory,specifically configured as 256MB RAM and 1GB Flash storage.

Integrate multiple communication protocols,such as EtherCAT,Profinet,Modbus TCP,etc.

Support remote monitoring and maintenance.

Built-in PID,fuzzy control,adaptive control and other advanced control algorithms.

Support user-defined algorithm programming.

Adopt real-time operating system(RTOS)to ensure fast response and execution of control instructions.

The shortest control cycle can reach 1 millisecond.

FOXBORO FCM10E

IV.Application scenarios

FOXBORO FCM10E module is widely used in process control in industries such as petroleum,chemical,electric power,and metallurgy,such as precise control of key parameters such as temperature,pressure,and flow.At the same time,it is also suitable for automated production lines in manufacturing industries such as automobiles,electronics,and food to achieve high-precision and high-efficiency production process control.In addition,in building automation systems,FCM10E can also be used for intelligent control of equipment such as air conditioners,lighting,and elevators to improve energy efficiency and comfort.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Schneider 140XCP51000 is a product produced by Schneider Electric.The following is a detailed introduction to this product:

1.Product Overview

The Schneider 140XCP51000 is an analog input and output module that may be part of the Schneider Electric PLC(Programmable Logic Controller)family.This product has efficient and powerful system functions and is suitable for various industrial automation and control fields.

2.Product features

Efficient performance:Schneider 140XCP51000 is known for its efficient performance and can meet the requirements for fast response and high precision in the industrial automation field.

Input and output function:As an analog input and output module,this product supports the input and output of analog signals and is suitable for control systems that need to process analog signals.

Easy to use:The product design is user-friendly and easy to install and use.Built-in keyboard and automatic program transfer function simplify the configuration and debugging process.

Schneider 140XCP51000

Redundant hot standby function(some models or configurations):Schneider PLC redundant hot standby control system has an advanced synchronization mechanism.The system switching time is less than 100ms,usually less than 20~30ms,ensuring high reliability and stability of the system.In addition,it also has application memory space,system registers,function blocks,configuration,micro terminals on the front panel,periodic transmission of application data,program difference monitoring,ensuring the consistency of PLC memory contents,automatic exchange of communication port addresses,and Functions such as automatic switching mechanisms during communications.

Wide applicability:This product is suitable for power plants,steel plants,cement plants,ships,papermaking and other industries,and has broad application prospects.

Schneider 140XCP51000

3.Technical parameters

The following are some possible technical parameters(specific parameters may vary depending on product model and configuration):

Specifications:10*16*23mm

Output frequency:56/63Hz

Working voltage:24Vdc/120Vac(specific voltage range may vary depending on model)

Operating system:DCS system(distributed control system)

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Allen Bradley 1784-KT is a communication module produced by Allen-Bradley(AB for short,a brand of Rockwell Automation).The following is a detailed introduction to the communication module:

1.Basic attributes

Brand:Allen-Bradley(Rockwell Automation)

Model:1784-KT

Type:Communication module

Allen Bradley 1784-KT

2.Main functions and applications

Function:The 1784-KT communication module is mainly used to establish a communication link between a personal computer,workstation or terminal and Allen-Bradley’s programmable logic controller(PLC).It allows these devices to communicate with AB processors and controllers through direct connection or DataHighway Plus network.

Application:This module is commonly used in industrial automation systems to facilitate the monitoring and control of equipment.It enhances the response time of the application and improves the compatibility and flexibility of the system by providing a single cable connection with the PLC-2,PLC-3,and PLC-5 series programmable controllers.

Allen Bradley 1784-KT

3.Technical specifications and features

Communication capabilities:Supports multiple communication protocols and network options to ensure compatibility and efficient communication with different devices.

Address selectable:supports multiple address selections and can be used with other option boards installed in a personal computer,increasing the flexibility and scalability of the system.

Software support:compatible with 6001-F1E software,6200 software,switching software,etc.,convenient for users to program and configure.

Physical specifications:half-size 8-bit ISA card,can be inserted into any 8-bit or 16-bit ISA expansion slot,easy to install and integrate.

Power requirements:0.4 amps at 5 volts DC and 0.04 amps at±12 volts DC,with power consumption of 2 watts and 0.48 watts respectively.

Environmental requirements:The recommended relative humidity range is 5 to 95%,and the operating temperature range is 32 to 130 degrees Fahrenheit(about 0 to 54 degrees Celsius),which can adapt to a variety of industrial environments.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl