Month: December 2024

Bently 3500/25 usually refers to the 3500/25 key phase module produced by Bently Nevada.The following is a detailed introduction to the module:

1.Product Overview

The Bently 3500/25 key phase module is an enhanced key phase module designed to provide key phase signals to monitoring modules on the 3500 rack.The module is capable of receiving input signals from proximity probes or magnetic pickups and converting these signals into digital key phaser signals for subsequent processing and monitoring.

Bently 3500/25

2.Technical Specifications

Module Type:Half-height dual-channel module.

Input Signal:

Input signals from proximity probes or magnetic pickups can be received.

The input signal range is+0.8V to-21.0V(non-isolated I/O module)or+5V to-11V(isolated I/O module).Signals outside this range will be limited internally by the module.

Output Signal:

Two buffered key signal outputs are provided at the front of the rack via coaxial connectors.

Two buffered keyphase outputs are available at the rear of the frame via Euro-style connectors.

Maximum buffered output impedance is 504Ω.

Automatic Threshold:

Minimum signal amplitude for triggering is 2V p-p.

Minimum frequency is 120 rpm(2 Hz).

Manual Threshold:

For any input above 0.017Hz(1 rpm,1 event per revolution).

User selectable from 0 to-20V DC.

Minimum signal amplitude for triggering is 500mV p-p.

Hysteresis:User selectable from 0.2 to 2.5V.

Environmental Limits:

Storage Temperature:-40°C to+85°C(-40°F to+185°F).

Humidity:95%non-condensing.

Physical Characteristics:

Dimensions:119.9mm x 24.4mm x 256.5mm.

Weight:0.34kg(0.76lb).

Bently 3500/25

3.Features

Dual-channel design:The 3500/25 keyphasor module has two input channels that can receive keyphasor signals from two different sensors,improving the reliability and flexibility of the system.

Digital signal conversion:The module is able to convert the received analog keyphasor signals into digital signals for subsequent processing and monitoring.

High-precision timing measurement:Through one or more event pulses(keyphasor signals)per revolution of the rotating shaft or gear,the 3500/25 keyphasor module is able to provide accurate timing measurements,providing strong support for equipment fault analysis and diagnosis.

Backward compatibility:The 3500/25 keyphasor module provides higher keyphasor signal processing capabilities than previous designs while maintaining full backward compatibility with the shape,fit and function of existing keyphasor modules used for legacy systems.

Multiple configuration options:Users can choose different configuration options according to actual needs,such as isolated I/O modules and non-insulated I/O modules,to meet the needs of different application scenarios.

4.Application Fields

Bently 3500/25 key phase module is widely used in various industrial monitoring and control systems,especially in situations where accurate measurement of shaft speed and vector characteristics is required.For example,it can be used for vibration monitoring,position monitoring and speed control of rotating machinery.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB’s TP830 3BSE018114R1 is a speed controller industrial control card.The following is a detailed analysis of the product:

1.Basic information

Brand:ABB

Part number:TP830 3BSE018114R1

2.Technical specifications

Protection level:IP30

Height:6mm

Applicable motor power:56KW

Applicable pipelines:8

Rated current:112mA

Applicable places:power industry

Communication interface:Ethernet

Door thickness:12mm

Structural form:withdrawable

ABB TP830 3BSE018114R1

3.Functional features

Speed​​control:As a speed controller industrial control card,TP830 3BSE018114R1 has precise speed control function and can adjust the running speed of the motor according to actual needs.

Communication capability:Through the Ethernet communication interface,the card can communicate efficiently with other devices to realize remote monitoring and control functions.

Modular design:The modular design is easy to install and maintain,and also improves the scalability and flexibility of the system.

ABB TP830 3BSE018114R1

IV.Application Field

TP830 3BSE018114R1 speed controller industrial control card is widely used in the power industry,especially in occasions that require precise speed regulation and remote monitoring.For example,in power plants,substations and other power facilities,this card can achieve precise control of motor speed and improve the operating efficiency and stability of power equipment.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

HONEYWELL CC-PAIN01 is a high-performance analog input module produced by Honeywell.The following is a detailed introduction to the module:

1.Product Overview

The CC-PAIN01 module is part of Honeywell’s Experion Process Knowledge System(PKSTM),which is mainly used to convert process variables(such as temperature,pressure,flow,etc.)into analog signals for use in other devices in the control system.The module is compact in design and rugged in structure,capable of withstanding harsh industrial environments,ensuring reliable performance under various conditions.

2.Technical Specifications

Input type:supports 2-wire or self-powered transmitters.

Input range:0 to 100%full scale.

Accuracy:±0.25%of full scale,ensuring accurate measurement and monitoring.

Temperature range:-40°C to 85°C,suitable for various industrial environments.

Power supply:24 VDC,providing stable power input.

Electrical connection:M12 connector is used to ensure the reliability and stability of the connection.

Size:about 10 cm×5 cm×3 cm,the compact design makes it easy to install and integrate into existing systems.

Weight:about 0.2 kg.

HONEYWELL CC-PAIN01

III.Functional features

High precision and high resolution:The CC-PAIN01 module has high precision and high resolution,can accurately measure and monitor various process parameters,and ensure that the analog signals received from the sensor can be accurately converted into digital signals for accurate analysis and processing by the control system.

Multi-channel analog input:The module is designed with multiple analog input channels(usually 8 analog inputs and 4 digital inputs),which can receive analog signals from different sensors and instruments to meet the needs of complex industrial applications while providing flexibility and scalability.

Signal conversion and communication:The core function of the module is to convert analog signals into digital signals so that the control system can process and analyze these data.It supports multiple communication protocols(such as Modbus RTU),and can send the converted digital signals to the control system to achieve effective transmission and recording of data.

Programmability:Users can configure and program these modules according to specific application requirements to define the functions and ranges of the input channels.This flexibility enables the module to adapt to a variety of complex and customized industrial automation systems.

Easy to install and maintain:The module adopts a compact design,which is easy to install and integrate into the existing system.At the same time,its sturdy structure and reliable performance also reduce maintenance costs.

HONEYWELL CC-PAIN01

IV.Application Fields

Due to its excellent performance and functions,the HONEYWELL CC-PAIN01 module is widely used in various industrial and manufacturing fields,including chemical,electric power,pharmaceutical,food processing and building automation.In these fields,the module provides strong support for industrial automation control systems,ensuring the stability and reliability of the production process.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ICS TRIPLEX T8830 is a high-performance,high-reliability redundant ICS system control module designed for the field of industrial automation.The following is a detailed introduction to the product:

1.Product Overview

ICS TRIPLEX T8830 control module adopts triple redundancy design to ensure the reliability and stability of the system.Even in harsh industrial environments,it can maintain continuous and stable operation and reduce production interruptions caused by equipment failures.It is suitable for various industrial automation fields,such as machinery manufacturing,power systems,chemical industry,transportation,etc.,and can meet the high reliability and high performance requirements of control systems in different industries.

2.Main Features

Triple Redundancy Design:

Adopting triple redundant architecture,it provides high system reliability and fault tolerance.

Even when one or two channels fail,the system can continue to operate,ensuring the continuity and stability of production.

Store and load PLC programs:

With the function of storing and loading PLC programs,it can easily manage and control industrial automation equipment.

Each user program can be stored and loaded using a separate smart media card,which improves the flexibility and scalability of the program.

Rich interfaces and expansion options:

Provide a variety of communication interfaces and expansion slots,support a variety of communication protocols and bus standards,such as Ethernet,serial port,CAN bus,etc.

ICS TRIPLEX T8830

This provides users with great flexibility and convenience,and can easily connect and communicate with other devices and systems.

Powerful data processing capabilities:

Adopt high-performance processors and large-capacity memory,with powerful data processing capabilities.

Can quickly process various control signals and data to ensure the real-time and accuracy of the system.

3.Technical Specifications

The technical specifications of ICS TRIPLEX T8830 may vary from manufacturer to manufacturer and batch to batch,but generally include the following:

Brand:ICS TRIPLEX

Model:T8830

Origin:may include Switzerland,etc.

Voltage:usually 220V or 24V(depending on application requirements)

Current:Depends on application requirements

Weight:about 2.3kg(specific weight may vary from batch to batch)

Dimensions:may include 26*33*37mm,etc.(specific dimensions may vary from manufacturer to manufacturer)

Memory card slot:Provides a memory card slot for storing and loading PLC programs

ICS TRIPLEX T8830

4.Application Fields

ICS TRIPLEX T8830 redundant ICS system control modules are widely used in various industrial automation fields,including but not limited to:

Machinery manufacturing:used to control various mechanical equipment and production lines to improve production efficiency and product quality.

Power system:used to monitor and control the operating status of power equipment to ensure the stability and safety of the power system.

Chemical industry:used to control chemical reaction processes and production lines to ensure product quality and production efficiency.

Transportation:Used to control traffic signals and transportation equipment to improve the efficiency and safety of transportation.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB D674A906U01 is a powerful automation processor module or flow meter transmitter module(specific identity may vary depending on the application scenario).The following is a detailed introduction to it:

1.Product Overview

ABB D674A906U01 is a high-performance automation processor module or flow meter transmitter module produced by ABB.The module is designed for industrial automation systems,power systems,manufacturing and other fields that require precise measurement and control.

2.Technical Features

High-precision measurement:

When used as a flow meter transmitter module,it can accurately measure the flow of liquid or gas,usually expressed in standard units(such as cubic meters per hour or gallons per minute).

Use various sensor technologies(such as turbine,electromagnetic,ultrasonic,etc.)to detect the flow of fluids and measure them.

Rich communication interfaces:

Equipped with multiple communication interfaces such as HART,Modbus,Profibus,etc.,it is convenient to communicate and transmit data with other control systems or monitoring equipment.

Support fieldbus communication,such as Profibus DP,Modbus TCP/IP,etc.

ABB D674A906U01

Data processing and control:

When used as an automation processor module,it is responsible for processing input/output signals,executing control logic,and realizing data processing and communication functions.

Supports standard IEC 61131-3 programming languages,such as LD(ladder diagram),ST(structured text),FBD(function block diagram),etc.,which is convenient for users to program according to specific application requirements.

Safety and reliability:

The product design meets ABB’s safety standards and quality control requirements to ensure the stable operation of equipment and systems.

The modular design is convenient for users to expand and configure according to specific application requirements.

Corrosion resistance and anti-pollution:

Flowmeter modules are generally designed to be corrosion-resistant and anti-pollution to adapt to different types of fluids.

Self-diagnosis function:

It has a self-diagnosis function that can detect sensor failures or abnormal conditions and generate alarms to improve system reliability and maintenance efficiency.

Display and configuration:

Some modules have a built-in display and configuration interface,allowing users to configure parameters and monitor flow.

Explosion-proof design:

Some modules have an explosion-proof design for hazardous environments.

ABB D674A906U01

3.Application fields

ABB D674A906U01 is widely used in the following fields:

Industrial automation system:used to perform various automation tasks and improve production efficiency.

Power system:used to monitor and control the operating status of power equipment.

Manufacturing:used to monitor the flow of liquids and gases to ensure product quality and production efficiency.

Chemical and pharmaceutical:used to monitor and control the flow of fluids in different processes to ensure the stability and consistency of the production process.

Oil and gas:used to measure the flow of crude oil,natural gas and petroleum products.

Water treatment:used to monitor and control the flow in water supply,drainage,sewage treatment and other processes.

Environmental monitoring:used to monitor the flow in air and water to help protect the environment and resources.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500/92 136180-01 is a communication gateway module produced by Bently Nevada.The following is a detailed introduction to the product:

1.Product Overview

The BENTLY 3500/92 136180-01 communication gateway module is an important part of the Bently Nevada 3500 monitoring system.It provides extensive communication capabilities for integrating the monitoring values​​and status of all racks with process control and other automation systems.The module supports multiple communication protocols,including Modicon Modbus protocol(via serial communication),Modbus/TCP protocol(for TCP/IP Ethernet communication),and proprietary Bently Nevada protocol(for communication with 3500 frame configuration and data acquisition software packages).

2.Main Features

Extensive communication capabilities:

Supports Ethernet TCP/IP and serial(RS232/RS422/RS485)communication protocols.

Can communicate with external devices such as DCS or PLC to obtain frame information and set frame configuration.

Multiple I/O module options:

Provide multiple options such as Modbus RS232/RS422 I/O module,Modbus RS485 I/O module,Ethernet/RS232 Modbus I/O module and Ethernet/RS485 Modbus I/O module.

Configurable Modbus registers:

In addition to the main value Modbus registers,configurable Modbus register utilities are also supported,providing the same functions as the initial value registers.

BENTLY 3500/92 136180-01

High reliability and stability:

Adopt high-quality materials and advanced manufacturing processes to ensure stable operation in harsh industrial environments.

Support multiple security protocols and technologies to protect factory equipment and production processes from threats.

Easy to install and maintain:

The module design is easy to install and remove,reducing the difficulty and cost of on-site maintenance.

Provide a friendly user interface and easy-to-use tools for user-friendly configuration and management.

3.Technical Specifications

Part Number:3500/92 136180-01

Manufacturer:Bently Nevada

Series:3500

Product Type:Communication Gateway Module

Power Consumption:Typical 5.0 Watts(Modbus RS232/RS422 I/O Module);5.6 Watts(Modbus RS485 I/O Module)

Dimensions:241 mm x 24.4 mm x 242 mm

Weight:0.82 kg

Communication Interface:RJ45 Ethernet Interface(for 10BASE-T Star Configuration Ethernet)

Operating Temperature:-30 to+65 degrees Celsius

Storage Temperature:-40 to+85 degrees Celsius

Humidity:95%,non-condensing

BENTLY 3500/92 136180-01

4.Application Fields

BENTLY 3500/92 136180-01 communication gateway module is widely used in various industrial fields,such as power plants,nuclear power plants,oil and gas facilities,steel,electricity,metallurgy,chemical industry,etc.It can be used in vibration monitoring and mechanical health management systems to provide reliable power supply and monitoring support for rotating equipment(such as turbines,generators,compressors,etc.).At the same time,the module can also be used in industrial automation systems to provide power supply and communication support for automation control equipment and monitoring systems to ensure stable operation and safe control of equipment.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500/42M 140734-02 is a high-performance monitoring module.The following is a summary of its detailed information:

I.Product Overview

BENTLY 3500/42M 140734-02 is a four-channel monitor designed for vibration and position measurement.It can accept inputs from eddy current displacement and seismic sensors and perform a variety of measurement tasks,such as radial vibration,axial position,eccentricity,differential expansion,acceleration and velocity.The module is programmed through the 3500 rack configuration software and can compare signals with user-set alarm points,provide mechanical protection,and return status values.

II.Main Features

Redundant power supply design:

Although it is not directly mentioned whether this model has redundant power supply,the BENTLY 3500 series generally focuses on high reliability and stability,and redundant power supply design is one of the possible configurations.Redundant power supply ensures that when the main power supply fails,the backup power supply can immediately take over to ensure continuous operation of the system.

Efficient and stable:

The module adopts advanced power management technology and high-quality electronic components to ensure the stability and efficiency of power output.It can provide stable voltage and current to meet the power supply needs of various complex systems.

BENTLY 3500/42M 140734-02

Multiple protections:

It has multiple protection functions such as overcurrent,overvoltage,and overheating,which can effectively prevent damage to equipment or safety accidents caused by power supply abnormalities.These protection functions can monitor the power supply status in real time and cut off the power supply in time under abnormal conditions to protect the safety of the system and equipment.

Easy to install and maintain:

The modular design makes installation and maintenance simpler and more convenient.Users can quickly replace or upgrade the power module,reducing system downtime and maintenance costs.

Intelligent monitoring and management:

Supports intelligent monitoring and management functions.By providing a wealth of interfaces and communication protocols,users can remotely monitor key parameters such as power supply status,voltage,current,etc.in real time.This enables users to discover and solve potential problems in a timely manner and improve the reliability and stability of the system.

High-precision measurement:

It can provide high-precision vibration and position measurement to meet the needs of accurate monitoring of mechanical status.

Multiple input types:In addition to accepting eddy current sensor input,it also supports other types of sensor input,such as acceleration sensor,etc.,which increases the flexibility and applicability of the module.

BENTLY 3500/42M 140734-02

3.Application fields

BENTLY 3500/42M 140734-02 module is widely used in industrial automation,data centers,medical equipment,communication equipment,and industrial fields such as petroleum and chemical industry.In these fields,the module is used to monitor and protect various machinery and equipment to ensure the continuous and stable operation of the system.Especially in vibration and position measurement tasks that require high precision and real-time requirements,the module has significant advantages.

4.Technical specifications(example)

Model:BENTLY 3500/42M 140734-02

Input type:eddy current displacement and seismic sensor

Measurement function:radial vibration,axial position,eccentricity,differential expansion,acceleration,speed,etc.

Power requirement:usually 24VDC(depending on the product manual)

Operating temperature range:-XX°C to+XX°C(depending on the product manual)

Communication interface:supports multiple communication protocols and interfaces(such as Modbus,etc.)

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

BENTLY 3500/42M 176449-02 is a high-performance shaft vibration monitoring module.The following is a summary of its detailed information:

I.Product Overview

The BENTLY 3500/42M 176449-02 module is designed for applications such as radial vibration,axial displacement,eccentricity,REBAM and differential expansion measurement.It is widely used in the field of industrial automation,especially in the shaft vibration monitoring of large gas and steam turbines.

II.Main Features

Multi-channel monitoring:

This module is a configurable 4-channel monitor module that can monitor multiple parameters simultaneously to improve the efficiency of testing and measurement.

Various input types:

In addition to receiving eddy current sensor input types,this module can also receive velocity,acceleration and dual probe(velocity and displacement)input types and their related signal conditioning,such as filtering and integration.

Differential signal processing:

This module has differential signal processing functions,which can extract casing vibration signals from shaft relative vibration,providing key information for shaft absolute measurement of large gas and steam turbines.

BENTLY 3500/42M 176449-02

High-precision measurement:

The module provides up to 24-bit resolution and low noise level for precise analog signal measurement.Its excellent linearity and low drift performance ensure accurate measurement results over a wide dynamic range.

Flexible input range:

BENTLY 3500/42M 176449-02 supports a variety of adjustable input ranges to accommodate the amplitude requirements of different signal sources,enhancing the flexibility and accuracy of measurement.

Built-in calibration function:

The module has a built-in automatic calibration function to ensure the accuracy and reliability of each channel during the measurement process.In addition,it also supports standard calibration procedures to further ensure the consistency and accuracy of measurement results.

High-speed data transmission:

Adopting the PXIe bus interface,the module is capable of high-speed data transmission,ensuring that the collected data can be quickly transferred to the computer for processing and analysis.

Temperature monitoring:

In addition to vibration monitoring,the module also has the ability to remotely monitor temperature conditions,providing insights into mechanical thermal performance.

Relay output:

Can be configured to activate an alarm,trip a shutdown sequence,or trigger other necessary actions in response to measured vibration levels or temperature deviations.

User interface:

The 3500/42M module has an intuitive interface that is easy to set up,program and monitor.

BENTLY 3500/42M 176449-02

III.Technical parameters

Model:3500/42M 176449-02

Input voltage:24VDC

Input current:100mA

Operating temperature:-40°C to+85°C

Vibration measurement range:0-25mm/s

Temperature measurement range:-40°C to+125°C

Communication interface:Modbus RS485

IV.Application areas

The BENTLY 3500/42M 176449-02 module is mainly used to monitor and protect various machinery and equipment,especially in the field of industrial automation.For vibration monitoring tasks that require high precision and real-time requirements,this module has significant advantages.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

A-B 1746-NI16I is an analog input module.Here is a detailed introduction to it:

1.Product Overview

A-B 1746-NI16I belongs to the product line of A-B(Rockwell Automation)and is an analog input module.Its main function is to convert external analog signals into digital signals for communication and processing with PLC(Programmable Logic Controller)or other automation equipment.

2.Technical Specifications

Number of channels:The module has 16 analog input channels and can read and process multiple analog signals at the same time.

Signal type:Supports many different types of analog signal inputs,including voltage signals,current signals,and resistance signals,suitable for a variety of different application scenarios.

Resolution:With 16-bit resolution,it can provide accurate analog signal conversion.

A-B 1746-NI16I

Sampling rate:The sampling rate is high,which can quickly and accurately capture the changes of input signals.

Communication interface:Use standard PLC communication interfaces(such as RS-232 or RS-485)to exchange data with PLC or other controllers.

3.Electrical characteristics

Voltage category:Voltage category of-20 to 20mA.

Backplane current:125mA at 5V,75mA at 24V.

Backplane power consumption:2.425W maximum(625.5W at 0V DC,8.24W at 1V DC).

Common-mode voltage range:±10.25V relative to analog common terminal.

Input impedance:249 ohms.

Maximum voltage input between analog common and any input terminal:±8V.

Maximum current input:±30mA.

IV.Environmental parameters

Relative humidity:5%to 95%,non-condensing.

Operating temperature range:-25 to 60 degrees Celsius(-13 to 140 degrees Fahrenheit).

Non-operating temperature range:-40 to 85 degrees Celsius(-40 to 185 degrees Fahrenheit).

V.Physical characteristics

Heat dissipation:2.43W.

AIFM connector:25-pin D shell.

Installation:When installing the module in the chassis,there is no need to remove the terminal block from the module.But if you remove the terminal block,use the label next to the terminal block to identify the location and type of the module.

dav

A-B 1746-NI16I

VI.Application Scenario

A-B 1746-NI16I analog input module is mainly used to connect analog process variables to measure their amplitude,and is often used for monitoring or as a feedback signal for closed-loop control systems.It can achieve manual or automatic control by using the usual proportional integral derivative(PID)algorithm control method.Without this feedback signal,automatic control cannot be fully achieved.

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

HONEYWELL FC-SAI-1620M is a safe high-density analog input module.The following is a detailed introduction to the product:

1.Product Overview

The FC-SAI-1620M module is part of the Honeywell Safety Manager™system and is designed for critical control applications.The module has 16 analog input channels and can be used to connect various sensors and actuators to achieve precise monitoring and control of industrial processes.

2.Main Features

Highly reliable:

It uses high-quality materials and manufacturing processes,with extremely high reliability and stability.

It can operate for a long time in harsh industrial environments and has dustproof,waterproof,shockproof and other characteristics.

Fast response:

It has fast signal processing capabilities and response time,and can monitor and control various industrial processes and machines in real time.

It helps to ensure the continuity and efficiency of factory production and reduce downtime and failure rate.

HONEYWELL FC-SAI-1620M

Flexibility and scalability:

It has flexible configuration and expansion capabilities,and can be customized and expanded according to different application requirements.

It can be used with various sensors and actuators to achieve diversified control and monitoring functions.

Easy to use and maintain:

With a user-friendly interface and easy-to-use tools,it is convenient for users to configure,manage and maintain.

Support remote monitoring and control,users can remotely access and control through the network,reducing the frequency and cost of on-site maintenance.

Security:

With high security,it can effectively protect factory equipment and production processes from various threats.

Support a variety of security protocols and technologies,such as encrypted communication,access control,fault detection,etc.,to ensure the safety and stability of factory operation.

III.Technical specifications

Number of channels:16 analog input channels.

Input signal:0(4)-20mA.

Power supply:24VDC.

Mounting method:card holder installation.

Dimensions:10.2×7.6×1.2 inches(about 259×193×30.5 mm).

Weight:1.2 pounds(about 0.54 kg).

HONEYWELL FC-SAI-1620M

IV.Application fields

FC-SAI-1620M module is suitable for various application scenarios that require high-precision analog input,such as industrial automation control systems in industries such as petroleum,chemical,electric power,and metallurgy.It can be seamlessly integrated with Honeywell’s Safety Manager™system to achieve efficient,safe and reliable industrial process control

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl