woodward 5501-467缩略图

woodward 5501-467

Woodward 5501-467 is a powerful industrial equipment component.Here is a detailed analysis of it:

1.Product Overview

The Woodward 5501-467 is often identified as a turbine controller card or digital speed regulator.It is a high-performance product produced by Woodward.It is designed for use in industrial control systems,especially in situations where precise control and monitoring of turbines or other rotating equipment is required.

2.Main functions and features

Network communication:Woodward 5501-467 supports TCP and Ethernet/IP network communication modes,and can be easily integrated into existing industrial Ethernet networks.

Protocol conversion:The device has protocol conversion between Modbus and Ethernet/IP,allowing devices with different communication protocols to connect and communicate seamlessly.

woodward 5501-467插图

woodward 5501-467

Flexible deployment:Woodward 5501-467 supports Ethernet cascading and dual subnet configuration,providing flexible deployment options to adapt to different industrial application scenarios.

Embedded flow monitoring/diagnostic information:The device has built-in flow monitoring and diagnostic functions,which can capture and check data in real time,helping users quickly determine the root cause of the problem.

Easy to configure:The device comes with a web console,which can be easily configured without installing additional utilities.At the same time,HTTPS communication encryption ensures higher network security.

Status monitoring and fault protection:Woodward 5501-467 has a status monitoring function that can notify the PLC/DCS/SCADA system when the Modbus device is disconnected or unresponsive.In addition,it also provides a fault protection function to perform predefined actions when the host is disconnected to prevent the terminal device from being offline for a long time.

3.Application fields

Woodward 5501-467 is widely used in various industrial automation fields,including but not limited to:

Factory automation:In factory automation systems,the device can be used to control various sensors,actuators and rotating equipment on the production line to automate and optimize the production process.

Power generation:In power generation equipment,Woodward 5501-467 can be used to control and monitor key equipment such as turbines and generators to ensure the stable operation of the power system.

woodward 5501-467插图1

woodward 5501-467

Oil and gas:In the oil and gas industry,the device can be used to control and monitor various rotating equipment such as compressors,pumps,etc.to improve production efficiency and safety.

Water and Wastewater Treatment:In water and wastewater treatment facilities,the Woodward 5501-467 can be used to control and monitor the operation of pumps and fans to achieve energy conservation and environmental protection goals.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Schneider 490NRP25400缩略图

Schneider 490NRP25400

490NRP25400 is a Modbus Plus protocol fieldbus fiber repeater from Schneider Electric.The following is a detailed introduction to the product:

1.Product Overview

Type:Industrial Ethernet Repeater.

Supported Protocol:Modbus Plus.

Main Features:It has independent dual-bus electrical interfaces and two fiber-optic interfaces,providing redundant dual-bus structure and fiber-optic redundant ring network functions.

Schneider 490NRP25400插图

Schneider 490NRP25400

2.Product Function

Signal Relay:This repeater module is mainly used to enhance the communication capability of industrial networks.It can relay signals from one network node to another,thereby expanding the coverage of the network.

Multiple Protocol Support:In addition to the Modbus Plus protocol,it also supports a variety of industrial communication protocols,such as Ethernet/IP,to ensure communication with different types of equipment and systems.

Redundancy Function:The reliability and stability of communication are improved through redundant dual-bus and fiber-optic redundant ring network functions.

3.Application Scenarios

Industrial Automation Network:The 490NRP25400 repeater module is commonly used in industrial automation networks,including manufacturing,power,water treatment,building automation and other fields.

Equipment connection:used to connect various industrial equipment,such as PLC,sensors,actuators,etc.,to achieve data transmission and communication.

IV.Product features

Interface design:It has independent dual Modbus Plus bus electrical interfaces and 1~2 155M optical fiber interfaces,supporting redundant dual-network optical fiber ring network topology.

Transmission distance:The optical fiber transmission distance can reach more than 20km,breaking the distance limit of the cable system.

Protection level:It adopts IP30 protection level corrugated aluminum reinforced casing,which has good durability and protection performance.

Installation method:It supports 35mm rail installation,which is convenient for deployment in industrial environments.

Power supply and protection:It supports dual power supply redundant input,with DC1500V voltage isolation and reverse connection protection functions to ensure the stable operation of the equipment.

Schneider 490NRP25400插图1

Schneider 490NRP25400

V.Performance indicators

Data electrical interface:Compatible with Modbus Plus fieldbus SER1,SER2 industrial terminal wiring,the communication rate is 1M.

Optical fiber interface:multi-mode 850nm,1310nm;single-mode 1310nm,1550nm.Transmission optical fiber includes multi-mode 50/125um,62.5/125um,100/140um;single-mode 8.3/125um,9/125um,10/125um.

Transmission distance:multi-mode 2Km,single-mode 20Km(longer distance optional).

Power supply:dual power supply redundant input,DC(9~36)V,typical DC24V,power consumption less than 4W.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

GE 369-HI-R-M-0-0-0-E缩略图

GE 369-HI-R-M-0-0-0-E

GE 369-HI-R-M-0-0-0-E is a motor management digital relay produced by General Electric(GE),which belongs to GE’s Multilin series.The following is a detailed analysis of this relay:

1.Product Overview

GE 369-HI-R-M-0-0-0-E motor management digital relay is a device used to monitor and protect three-phase motors and their mechanical systems.It is designed to measure key parameters of the motor,such as cooling rate,time required to accelerate to full function,and motor inrush current value,and provide protection for the motor based on these parameters.

GE 369-HI-R-M-0-0-0-E插图

GE 369-HI-R-M-0-0-0-E

2.Functional Features

Motor protection:This relay is able to monitor the operating status of the motor and provide protection when abnormal conditions are detected,such as overload,overheating,ground fault,etc.

FlexCurve(TM)overload curve:GE 369-HI-R-M-0-0-0-E provides an overload curve customization function called FlexCurve(TM),which allows users to customize it according to the specific needs of the motor.

Multiple measurement functions:The relay can measure quantities such as voltage,watts,frequency,and energy,and generate protection functions based on the generated value data.

Event recording:After tripping,the relay can immediately report the cause of the trip as well as the temperature and data values​​at the time of tripping,which helps users analyze problems in the system.

Pre-trip alarm:The relay can notify the user before tripping due to ground faults,mechanical blockages,RTD overtemperature,etc.,providing early warning functions.

Motor health report:The relay can use learned information and the history of system trips to identify when and where maintenance may be required,providing an assessment of the motor health status.

III.Application areas

GE 369-HI-R-M-0-0-0-E motor management digital relay is widely used in industrial automation equipment that requires motor control,such as manufacturing,chemical,power,oil and gas industries.It is suitable for the protection and monitoring of medium-sized motors,helping to improve production efficiency,reduce maintenance costs and extend equipment life.

GE 369-HI-R-M-0-0-0-E插图1

GE 369-HI-R-M-0-0-0-E

IV.Product advantages

High-precision measurement:The relay can accurately measure the key parameters of the motor and provide accurate protection.

Flexible customization:Through the FlexCurve(TM)overload curve customization function,users can customize according to the specific needs of the motor to improve the accuracy and reliability of protection.

Multiple protection functions:The relay provides multiple protection functions such as overload,overheating,ground fault,etc.to ensure the safe operation of the motor.

Easy maintenance:The relay provides functions such as event recording and motor health report,which helps users to find problems and perform maintenance in time.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Schneider 140CPU31110缩略图

Schneider 140CPU31110

Schneider 140CPU31110 is a CPU module for PLC(Programmable Logic Controller)produced by Schneider.The following is a detailed introduction to the product:

1.Basic Information

Brand:Schneider

Model:140CPU31110

Type:PLC CPU Module

Schneider 140CPU31110插图

Schneider 140CPU31110

2.Product Features

Easy to operate:140CPU31110 may adopt a non-detachable terminal block design,making connection and installation easier.

High performance:As part of Schneider’s 140 series PLC,140CPU31110 has excellent computing power and stability,and can meet various complex automation control needs.

Widely used:This CPU module is suitable for a variety of industrial automation scenarios,such as manufacturing,chemical industry,power,etc.

Schneider 140CPU31110插图1

Schneider 140CPU31110

3.Price and supply

Price:Depending on the supplier and the purchase period,the price of 140CPU31110 will vary.For example,some suppliers quote 2,000 yuan/unit,while others quote 510 yuan/piece or 190 yuan(when the order quantity is 1).The specific price shall be subject to the contract agreement at the time of actual purchase.

Supply:This product is usually provided by multiple suppliers and has a certain amount of inventory.When purchasing,it is recommended to confirm the supply and delivery time with the supplier.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Schneider 140CPU43412A缩略图

Schneider 140CPU43412A

Schneider 140CPU43412A is a processor module produced by Schneider Electric.It belongs to the Modicon Quantum automation platform and has a variety of designs and working functions.The following is a detailed analysis of the product:

1.Basic specifications

Model:140CPU43412A

Clock pulse frequency:66 MHz

Memory:Internal RAM 896 kB

Precise time of 1K instruction:0.1~0.5 ms

Monitoring clock:250 ms

Clock error:+/-8 sl days under certain conditions

Schneider 140CPU43412A插图

Schneider 140CPU43412A

2.Functional features

Long battery life:140CPU43412A has a built-in 1.2Ah lithium battery with a battery life of up to 10 years,ensuring the effective operation of the module for a long time.

Extensive connectivity:The module supports up to six network modules(such as Modbus Plus,Ethernet and multi-axis motion option modules),and has 2 remote networks and 3 distributed networks,allowing extensive connectivity.

Multi-port design:140CPU43412A is equipped with 3 ports,including 1 Modbusplus and 2 Modbus RS232,providing users with a variety of communication options.

Unique Flash Executor:The module has a unique Flash Executor,which improves the flexibility and reliability of the system.

Single slide switch:used to select the communication parameter setting of the Modbus(RS-232)port,simplifying the configuration process.

Key switch:used to protect the memory from programming changes while the controller is running,enhancing the security of the system.

Address switch:composed of two rotary switches,located on the back panel of Quantum CPUs,used to set the ModbusPlus node and Modbus port address,improving the manageability of the system.

III.Application field

The 140CPU43412A processor module is widely used in the field of industrial automation,including but not limited to manufacturing,chemical industry,power industry and construction industry.It can be used as the core processor in the automation control system,responsible for data acquisition,processing and transmission,and realizing precise control of various industrial equipment.

Schneider 140CPU43412A插图1

Schneider 140CPU43412A

4.Product Advantages

High performance:With a clock frequency of 66 MHz and 896 kB of internal RAM,the 140CPU43412A can efficiently handle various complex control tasks.

Flexibility:Supports multiple communication protocols and interfaces,easy to integrate and expand with other devices or systems.

Reliability:Made of high-quality materials and advanced technology,it has high reliability and stability and can operate stably for a long time in harsh industrial environments.

Easy to maintain:Provides a user-friendly interface and easy-to-configure software tools to facilitate users to configure and maintain the device.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

ABB 07KT98 GJR5253100R3160

ABB 07KT98 GJR5253100R3160 is a specific model of product produced by ABB,which is usually used in the field of industrial automation and control systems.The following is a detailed analysis of the product:

1.Product Overview

ABB 07KT98 GJR5253100R3160 may be an analog input and output module or Ethernet communication module used to connect and control various devices in industrial automation systems.It supports multiple communication protocols and interfaces,and can achieve efficient data transmission and precise control.

ABB 07KT98 GJR5253100R3160插图

ABB 07KT98 GJR5253100R3160

2.Functional Features

Analog input and output:The module may have analog input and output functions,can receive analog signals from sensors,and convert them into digital signals for processing,and can also convert digital control signals into analog signal outputs to control the operation of external devices.

Ethernet communication:As an Ethernet communication module,it supports Ethernet protocol,can realize network communication with other devices or systems,and realize remote monitoring,data acquisition and fault diagnosis.

High precision:The module may have high-precision analog input and output capabilities,which can meet the application requirements with high control accuracy.

Programmability:ABB 07KT98 GJR5253100R3160 may support user-defined programming,and users can set specific control logic and parameters according to actual needs.

High reliability:The module is manufactured with high-quality materials and advanced technology,has high reliability and stability,and can operate stably for a long time in harsh industrial environments.

III.Application areas

ABB 07KT98 GJR5253100R3160插图1

ABB 07KT98 GJR5253100R3160

ABB 07KT98 GJR5253100R3160 modules are widely used in the fields of industrial automation and control systems,including but not limited to the following aspects:

Manufacturing:used for equipment control and monitoring on production lines to improve production efficiency and product quality.

Chemical industry:In the chemical production process,it is used to control the operation of equipment such as reactors,pumps,valves,etc.to ensure the stability and safety of the production process.

Power industry:In the power system,it is used to monitor and control the operating status of power grid equipment and improve the reliability and stability of the power system.

Construction industry:In the building automation system,it is used to control the operation of lighting,air conditioning,security and other equipment to improve building energy efficiency and comfort.

4.Product Advantages

High integration:The module integrates multiple functions such as analog input,output and Ethernet communication,reducing system complexity and cost.

Easy to configure and maintain:The ABB 07KT98 GJR5253100R3160 module has a user-friendly interface and easy-to-configure software tools,which facilitates users to configure and maintain the equipment.

Strong scalability:The module supports multiple communication protocols and interfaces,and is easy to integrate and expand with other devices or systems.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Allen-Bradley 1398-DDM-075缩略图

Allen-Bradley 1398-DDM-075

The 1398-DDM-075 is an Ultra 200 series digital servo drive manufactured by Allen-Bradley,a Rockwell Automation product.The following is a detailed analysis of the servo drive:

1.Basic features

Manufacturer and brand:Allen-Bradley,a Rockwell Automation brand.

Model:1398-DDM-075.

Series:Ultra 200 series.

2.Electrical specifications

AC input voltage:100~240VAC rms,single-phase or three-phase.

Input frequency:47~63Hz.

Peak output current:

Single-phase input:50 amps.

Three-phase input:75 amps.

Allen-Bradley 1398-DDM-075插图

Allen-Bradley 1398-DDM-075

Continuous output current:

Single-phase operation:15 amps(another saying is 3 amps,but 50 amps peak corresponds to 15 amps continuous output is more reasonable).

Three-phase operation:35 amps(some say 1 amp,but 75 amp peak corresponds to 35 amp continuous output,which is more reasonable).

Output power:

Single-phase peak:14 kW(some say 3 kW,but 14 kW is more common).

Three-phase peak:20 kW.

Three-phase continuous:7.5 kW(or 20.3 kW,but 7.5 kW is the common specification).

Bus voltage:141~339VDC(some say 7~5VDC,but 141~339VDC is the correct range).

Bus capacitance:4290µF(some say 141μF,but 4290µF is the correct value).

Bus capacitance energy absorption:152 joules(some say 3 joules,but 152 joules is the correct value).

Power dissipation:300 watts(some say 339 watts,but 300 watts is the common specification).

3.Auxiliary functions and interfaces

Auxiliary input:For main AC input circuit power supply voltage isolation,rated at 100240VAC,single phase,frequency 4763Hz.

User configurable inputs:5 24V,current sinking,optically isolated,high-level active inputs.

Fixed assigned control input:1 ENABLE,current sinking,optically isolated,high-level active input.

Assignable outputs:4 24V,current sinking,optically isolated,high-level active outputs.

Dedicated outputs:2 normally open relay outputs(brake and drive ready).

Embedded analog input/output channels:

2 dedicated 10-bit 0~10V analog inputs(+I LIMIT and-I LIMIT).

2 optional±10V analog outputs(1 12-bit,1 8-bit,i.e.ANALOG1 and ANALOG2).

The analog input voltage range is 0~10V with 10-bit resolution.

The analog output has 8-bit and 12-bit resolution.

4.Physical and Environmental Specifications

Weight:21.32 pounds(or 0.85kg,but 21.32 pounds is a common specification and may vary depending on different versions or configurations).

Dimensions:14.2×5.97×8.84 inches(360.6×151.7×224.5 mm).

Recommended humidity limit:between 5%and 95%.

Operating environment temperature:0°C~40°C(no freezing)during operation.

Operating humidity:less than 80%RH(no condensation)during operation.

Allen-Bradley 1398-DDM-075插图1

Allen-Bradley 1398-DDM-075

5.Functions and Applications

Functions:Microprocessor-based servo drive with built-in functions to manage drive current,speed and position.

Compatibility:Compatible with Allen-Bradley brushless servo motors.

Applications:Widely used in industrial automation fields,such as robotic arms,machine tools,printing presses,packaging machines and other applications that require high-precision and high-performance control.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Emerson 1C31122G01缩略图

Emerson 1C31122G01

1C31122G01 is an output module widely used in the field of industrial automation and process control.The following is a detailed introduction to the module:

1.Product Overview

The 1C31122G01 output module is usually produced by Emerson Process Management(some materials also mention Westinghouse,but considering Emerson Process Management’s popularity and product range in the field of industrial automation,Emerson is more likely to be the manufacturer).This module is mainly used to convert the digital signal generated by the control system into a control signal for external devices,thereby achieving control and regulation of the production process.

Emerson 1C31122G01插图

Emerson 1C31122G01

2.Product Features

High Precision and Stability:

The 1C31122G01 module uses advanced digital processing technology and stable circuit design to ensure the accuracy and stability of the output signal.

Multi-channel Design:

In order to meet the needs of complex industrial applications,the module usually has multiple output channels and can control multiple devices or actuators at the same time.

Fast Response:

For application scenarios that require fast response,the 1C31122G01 module has the characteristics of low latency and high throughput to ensure timely and accurate execution of control commands.

High compatibility:

The module usually has good compatibility and can be easily integrated into various industrial automation systems,and can be seamlessly connected with various controllers and sensors.

Reliable safety performance:

The module has safety functions such as overload protection and short circuit protection to ensure that the output can be safely stopped or fault processing can be performed under abnormal conditions to ensure the safety of equipment and personnel.

Emerson 1C31122G01插图1

Emerson 1C31122G01

Programming and configuration:

The 1C31122G01 module needs to be programmed and configured in the control system to determine the operation mode and logic of the output channel.

Fault detection and alarm:

Some models of 1C31122G01 modules may have a fault detection function that can detect faults in actuators or output channels and issue an alarm.

Durability:

The module usually has industrial-grade durability and can operate stably in harsh industrial environments,resisting conditions such as vibration,humidity and temperature changes.

III.Application areas

The 1C31122G01 output module plays an important role in the fields of industrial automation and process control.Specific application areas include:

Industrial automation:used to control various equipment and process parameters on the production line.

Process control:used to monitor and adjust parameters such as temperature,pressure,flow rate,etc.in the chemical production process.

Energy management:used to control various equipment in power plants and transmission systems to achieve stable operation of the power system.

Environmental monitoring:used to monitor environmental conditions such as air pollution,water pollution,etc.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

HIMA Z7116缩略图

HIMA Z7116

HIMA Z7116 is a high-performance safety control system component produced by HIMA.The following is a detailed introduction to it:

1.Product Overview

The HIMA Z7116 safety module is an input and output module designed for safety control systems.Its high performance and reliability make it one of the preferred products in the field of industrial automation and process control.

HIMA Z7116插图

HIMA Z7116

2.Application Field

This module is widely used in industries such as petrochemicals,offshore oil platforms,oil and gas long-distance pipelines,metallurgy,electricity,machinery manufacturing,transportation,and large public buildings,providing reliable safety protection for these industries.

3.Product Features

High reliability:

Adopt high-quality electronic components and advanced manufacturing processes to ensure long-term stable operation.

It has functions such as fault self-checking and redundant design to effectively improve the reliability of the system.

Multiple input and output types:

Support multiple input and output signal types,such as switch quantity,analog quantity,etc.

It can be compatible with different types of sensors and actuators to improve the flexibility and scalability of the system.

HIMA Z7116插图1

HIMA Z7116

Programmability:

With programmable functions,users can flexibly program and configure according to actual needs.

It supports multiple programming languages​​(such as ladder diagrams,structured text,etc.)and provides a wealth of programming and configuration tools.

Easy to integrate and maintain:

Adopt modular design,easy to integrate with other automation equipment.

Provide convenient maintenance interface and fault diagnosis function to reduce system maintenance cost and time.

Excellent safety performance:

As an important part of the safety control system,it can monitor the operating status of the system in real time.

When abnormal conditions are detected,it will promptly issue an alarm or execute a safety control strategy to ensure the safety and stability of the production process.

High precision and stability:

Based on advanced signal processing technology and high-quality electronic components,it provides high-precision and stable input and output signals.

Ensure the accuracy and reliability of the control system.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

TSXPBY10缩略图

TSXPBY10

TSXPBY10 is a high-performance fiber optic network product.The following is a detailed introduction to the product:

1.Product Overview

TSXPBY10 adopts advanced design and manufacturing technology and can be flexibly applied to a variety of fiber optic network environments.It has a logically independent dual-bus electrical interface,which can realize the backup of the electrical interface or the access of a single device to a dual redundant bus system,providing higher reliability and stability for network communication.

2.Product Features

Dual optical port redundancy function:

TSXPBY10 adopts a dual optical port design to realize the dual-fiber ring network redundancy function.When a fiber fails somewhere,the system can rebuild the network link within 10ms to ensure the normal communication of the system and realize the self-healing protection function of signal transmission.After the network fault is eliminated,the system will automatically recover.

TSXPBY10插图

TSXPBY10

Proprietary ring network protocol:

This product adopts the company’s self-developed proprietary ring network protocol Ci-ring,which does not require the setting of a root node and can quickly complete the network’s ring and de-ring functions.This feature makes TSXPBY10 more adaptable and flexible in complex fiber optic network environments.

Plug and Play:

TSXPBY10 series products are plug and play,no configuration is required,which greatly simplifies the user’s installation and debugging process.This feature enables the product to be put into use faster,reducing the user’s operating costs and time costs.

Support for multiple network topologies:

This product can support point-to-point network topologies,and realize the connection of two Profibus DP bus segments through optical fiber.At the same time,it can also support the connection of multiple network segments of Profibus DP bus on the optical fiber bus of the dual optical port chain network(up to 200).

III.Performance indicators

Data electrical interface:

9-pin Sub_D jack connector,the pin definition complies with the Profibus DP protocol specification.

Support Profibus DP bus standard.

Communication rate:

Up to 12MBit/s,the specific rate can be set by automatic identification or DIP switch.

Signal delay:

Electrical port signal delay≤11Bit;optical port signal delay≤1.6us/node.

Lightning protection and overcurrent protection:

It has 4000V lightning protection,1.5A overcurrent protection and 600W surge protection.

TSXPBY10插图1

TSXPBY10

Fiber wavelength and transmission distance:

Multimode fiber wavelength can be 850nm and 1310nm;single-mode fiber wavelength can be 1310nm and 1550nm.

In terms of transmission distance,multimode fiber can reach 2Km,and single-mode fiber can reach 20Km(longer distance is optional).

Fiber interface type:

Optional SC,FC,ST and other interface types,standard SC optical interface.

IV.Application field

TSXPBY10 is widely used in industrial automation,communication,data center and other fields due to its high performance and flexible application characteristics.It can meet the needs of various complex fiber optic network environments and provide users with stable and reliable network communication solutions.

 

The company mainly imports PLC modules,programmable controllers,servo control systems and DCS spare parts,such as:ABB,AB(Rockwell),GE(General Electric),Bentley,Honeywell Er),Emerson.),Motorola,Invensys,Westinghouse,etc.The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers.We can purchase goods directly from abroad and provide equipment and spare parts from different countries and manufacturers.

We supply goods directly from abroad,without intermediaries,reducing the cost of use.

There is really no medium that can make a difference!!

Shenzhen Changxin Automation-sufficient supply,large spot quantity,guaranteed quality,you can buy with confidence and use with peace of mind~!

If you have any defects or needs for imported PLC and DCS spare parts,please contact our team,we will help you find reliable and high-quality products super quickly,while shortening delivery time to ensure that your equipment can operate normally in the right environment.Just in time.

Professionally provide:PLC programmable control system,distributed control system(DCS),safety instrument system(SIS),ESD system,vibration monitoring system,turbo compressor unit control system(CCS)and other PLC modules,various industrial control systems,system modules,CPU,IO module,DO module,AI module,DI module,network communication module,Ethernet module,motion controller,analog input module,analog output module,digital input module,digital output module,module redundancy,power module,relay output unit,relay input unit,processor unit.

Products are widely used in:electricity,petroleum,mine hoisting,ports,heating,gas,water supply,sewage treatment,metallurgy,papermaking,textile,chemical industry,water conservancy and other modern industrial fields!

1.”Power plant DCS monitoring system”

2.”Intelligent flat tempering furnace system manufacturing”

3.”PLC programmable transmission control system”

4.”DCS distributed control system”

5.”Intelligent fire water suppl

Back to Top

Search For Products

Product has been added to your cart