GE IS215UCVHM06A缩略图

GE IS215UCVHM06A

GE IS215UCVHM06A Product Details

Product Overview

GE IS215UCVHM06A is a universal controller module designed by General Electric(GE)for its Mark VIe series distributed turbine control system.It plays a vital role in GE’s turbine control system and is responsible for performing various control logic and data processing tasks.

Main Functions

Control Logic:Implement various control functions of the turbine,including start-up,shutdown,load regulation,etc.

Data Processing:Process signals from various sensors and actuators,perform data analysis and calculations.

Human-computer interaction:Interact with the operator interface to provide real-time data display and control functions.

Product Features

High Reliability:Industrial-grade design,suitable for harsh industrial environments.

High Performance:Fast processing speed,able to meet the needs of real-time control.

Modular Design:Modular structure,easy system expansion and maintenance.

Flexible Configuration:Can be flexibly configured according to different application requirements.

GE IS215UCVHM06A插图 GE IS215UCVHM06A插图1 GE IS215UCVHM06A插图2

Typical Application Scenarios

Gas Turbine:Used to control the start-up,shutdown,load regulation,etc.of gas turbines.

Steam turbine:used to control the start,shutdown,load regulation,etc.of the steam turbine.

Combined cycle power generation:used to control the various components of the combined cycle power generation system.

Technical parameters(general parameters,please refer to the product manual for specific parameters)

Processor:high-performance embedded processor

Memory:large-capacity memory,supporting complex control algorithms

Interface:multiple interfaces,including digital interface,analog interface,etc.

Operating temperature:-20℃~+60℃

Supply voltage:24V DC

GE IS215UCVEM06A缩略图

GE IS215UCVEM06A

GE IS215UCVEM06A Product Details

Product Overview

GE IS215UCVEM06A is a universal controller module designed by General Electric(GE)for its Mark VIe series distributed turbine control system.It plays a vital role in GE’s turbine control system and is responsible for performing various control logic and data processing tasks.

Main Functions

Control Logic:Implement various control functions of the turbine,including start-up,shutdown,load regulation,etc.

Data Processing:Process signals from various sensors and actuators,perform data analysis and calculations.

Human-computer interaction:Interact with the operator interface to provide real-time data display and control functions.

GE IS215UCVEM06A插图 GE IS215UCVEM06A插图1 GE IS215UCVEM06A插图2

Product Features

High Reliability:Industrial-grade design,suitable for harsh industrial environments.

High Performance:Fast processing speed,able to meet the needs of real-time control.

Modular Design:Modular structure,easy system expansion and maintenance.

Flexible Configuration:Can be flexibly configured according to different application requirements.

Typical Application Scenarios

Gas Turbine:Used to control the start-up,shutdown,load regulation,etc.of gas turbines.

Steam turbine:used to control the start,shutdown,load regulation,etc.of the steam turbine.

Combined cycle power generation:used to control the various components of the combined cycle power generation system.

Technical parameters(general parameters,please refer to the product manual for specific parameters)

Processor:high-performance embedded processor

Memory:large-capacity memory,supporting complex control algorithms

Interface:multiple interfaces,including digital interface,analog interface,etc.

Operating temperature:-20℃~+60℃

Supply voltage:24V DC

GE IS210AEDBH4AGD缩略图

GE IS210AEDBH4AGD

GE IS210AEDBH4AGD​​Product Details

Product Overview

GE IS210AEDBH4AGD​​is a bridge interface card designed by General Electric(GE)for its Mark VI system.It is mainly used to connect different components of the Mark VI system to achieve data exchange and system integration.This product is usually used in industrial fields such as power plants and petrochemicals to provide control and monitoring for large rotating machinery.

Main Functions

Bridge Interface:Connect different modules of the Mark VI system to achieve data transmission and communication.

Signal Conversion:Convert different types of signals to achieve interconnection between systems.

Data Processing:Process and analyze data to provide support for upper-level applications.

GE IS210AEDBH4AGD插图 GE IS210AEDBH4AGD插图1 GE IS210AEDBH4AGD插图2

Product Features

High Reliability:Industrial-grade design,suitable for harsh industrial environments.

High Performance:Fast processing speed,able to meet the needs of real-time control.

Modular Design:Modular structure,easy system expansion and maintenance.

Good Compatibility:Compatible with other components of the GE Mark VI system.

Typical Application Scenarios

Power Plant:Used to control and monitor equipment such as steam turbines and generators.

Petrochemical industry:used to control and monitor compressors,pumps and other equipment.

Other industrial fields:used in situations where process control and monitoring are required.

Technical parameters(general parameters,please refer to the product manual for specific parameters)

Interface type:multiple interfaces,including digital interface,analog interface,etc.

Communication protocol:supports the communication protocol of GE Mark VI system.

Operating temperature:-20℃~+60℃

Supply voltage:24V DC

ABB 3BSE013230R1缩略图

ABB 3BSE013230R1

ABB 3BSE013230R1 is a control module.The following is its detailed product information:

1.Product Overview

ABB 3BSE013230R1 control module is a high-performance,high-reliability industrial automation control component launched by ABB.The module is designed to meet the needs of various complex industrial applications and provide stable and precise control functions.

2.Main features

Communication rate support:The module supports the predetermined communication rate in the standard specification,and can manually set all its standard rates or achieve rate adaptation(all electrical interface rates are consistent)through the dip switch.This ensures the compatibility and stability of the module in different network environments.

Status indicator:Equipped with 6 two-color LED status indicators to intuitively display the working status and fault information of the module.At the same time,the power failure relay outputs an alarm,which is convenient for users to promptly discover and deal with potential problems.

Lightning and surge protection:The electrical interface has a 4000V lightning protection capability,as well as 1.5A overcurrent protection and 600W surge protection.This effectively improves the module’s anti-interference ability and reliability in harsh environments.

Power supply design:DC9-36V wide redundant dual power supply design is adopted,with DC1500V power supply isolation and reverse connection protection functions.This ensures the stable operation of the module under power fluctuations or abnormal conditions.

Industrial-grade design:The module has passed EMC test certification,adopts a corrugated aluminum reinforced housing with IP30 protection level,and supports standard industrial 35mm rail installation.This makes it suitable for various harsh industrial environments.

ABB 3BSE013230R1插图 ABB 3BSE013230R1插图1 ABB 3BSE013230R1插图2

III.Performance indicators

Data electrical interface:

9-pin Sub_D jack connector,the pin definition complies with the protocol specification of Profibus DP.

Supports Profibus DP bus standard.

Communication rates include 9.6kBit/s,19.2 kBit/s,45.45kBit/s,93.75kBit/s,187.5kBit/s,500kBit/s,1.5MBit/s,6MBit/s and 12MBit/s.

Terminal resistance:This machine does not have a terminal resistance,which needs to be connected externally as needed.

Power supply and protection:

Dual power supply redundant input,DC(9-36)V,typical DC24 V,power consumption less than 4 W.

With DC1500 V voltage isolation and reverse connection protection function,industrial terminal interface.

Relay alarm output:link fault and power failure alarm output,contact capacity is DC48 V/1 A,industrial terminal interface.

IV.Application field

ABB 3BSE013230R1 control module is widely used in industrial automation control systems,such as manufacturing,energy,transportation,construction and other fields.It can be used to realize various automation control tasks,such as equipment monitoring,process control,data acquisition,etc.

ABB 3BSE020850R1 PLC缩略图

ABB 3BSE020850R1 PLC

ABB 3BSE020850R1 PLC Product Details

Learn about ABB 3BSE020850R1

ABB 3BSE020850R1 is a PLC(Programmable Logic Controller)module produced by ABB.PLC is an indispensable part of industrial automation and is used to control various automation equipment and processes.

Product Features(may include but are not limited to)

Modular design:Modular design allows flexible configuration according to different application requirements.

High performance:With high-speed processing power and large storage capacity,it can meet complex control requirements.

High reliability:With industrial-grade design,it has high reliability and is suitable for harsh industrial environments.

ABB 3BSE020850R1 PLC插图 ABB 3BSE020850R1 PLC插图1

Rich communication interfaces:Supports multiple communication protocols,such as PROFIBUS,MODBUS,etc.,which is convenient for communication with the host computer or other devices.

Easy to program:Provides a friendly programming environment to facilitate users to develop and debug programs.

Possible application scenarios

Industrial automation:Widely used in various industrial automation systems,such as:

Production line automation:Controls all aspects of the production line to achieve automated production.

Robot control:Control industrial robots to perform various actions.

Logistics automation:Control conveying systems,sorting systems,etc.

Process control:Used in process control systems to achieve real-time monitoring and control of production processes.

Building automation:Used in building automation systems to achieve centralized control of building equipment.

ABB 3BDH000017R1缩略图

ABB 3BDH000017R1

ABB 3BDH000017R1 is an Ethernet communication module.The following is a detailed introduction to the product:

1.Brand background

Company name:ABB

Company profile:ABB is a global leader in power and automation technology,providing solutions to customers in the fields of industry,energy,power,transportation and construction,helping them improve productivity and energy efficiency while reducing environmental impact.The company is headquartered in Zurich,Switzerland,and is listed on the Zurich,Stockholm and New York Stock Exchanges.

2.Product overview

Product model:3BDH000017R1

Product type:Ethernet communication module

Application scenario:Commonly used in industrial automation systems,such as welding robot control,etc.,and widely used in industrial fields such as automobile manufacturing.

ABB 3BDH000017R1插图 ABB 3BDH000017R1插图1 ABB 3BDH000017R1插图2

3.Product features

Debug signal:Ethernet signal can be debugged to convert the signal on the network line into data that the CPU can recognize.

Protocol support:Supports multiple protocols and transmission modes,such as TCP/IP,modbus RTU,etc.,with 10M/100M Ethernet interface,and supports 802.3 standard Ethernet protocol.

Serial port transmission:supports serial port transmission mode and AT command mode,the power supply voltage is 3.3VTTL level,and supports multiple baud rate ranges and verification methods.

Recording and control accuracy:The recording accuracy can reach±1%,and the control accuracy can reach±0.5%.The setting range is usually 0 to 100%(two groups),and the travel time does not exceed 5 seconds.

Intelligent design:Adopting high-speed 16-bit A/D converter,the measurement data is stable and the repeatability is good.With automatic program control current source technology,it can automatically judge the faults such as virtual connection and disconnection of the test line.

Protection and safety function:It has perfect protection function,which can reliably protect the influence of back electromotive force on the instrument,and has automatic discharge indication function.

IV.Working environment

Working temperature:0~50℃

Relative humidity:≤90%

Power supply voltage:220V±10%50Hz±5%

Power consumption:≤20VA

ABB 100472-012缩略图

ABB 100472-012

ABB 100472-012 is a powerful product.Here is an introduction to its details:

1.Product Overview

ABB 100472-012,also known as BOXER-8170AI,is a network platform keyboard designed for industrial automation and process control.It is widely used in manufacturing,power production,power transmission and distribution systems,building automation,and water treatment.As a user interface device,it provides operators with data input,parameter setting,monitoring,and control of industrial processes.

2.Core Hardware

Processor:Adopts NVIDIA Jetson TX2 6-core processor,which provides powerful power for AI Edge solutions by pairing dual Denver 2 and quad-arm A57 processors into a single SOC.Its design of up to 256 CUDA cores further enhances processing capabilities.

Memory and Storage:Onboard 8GB LPDDR4 memory and 32GB eMMC storage,which means it has enough power to handle large amounts of data and complex computing tasks.

ABB 100472-012插图 ABB 100472-012插图1 ABB 100472-012插图2

3.Software Support

AI Framework:Supports AI frameworks such as TensorFlow and Caffe,as well as AI reasoning software for developers and customers,providing flexibility and stability for AI edge networks.

Programming and Configuration:Supports configuration and programming to adapt to different application requirements.Users can set input channel parameters,sampling rate,trigger conditions,etc.as needed.

4.Communication and Expansion

Network Interface:Designed with four PoE LAN ports,each with its own dedicated chip,allowing PoE cameras to run separately on a dedicated connection and supporting a maximum output power of 60 watts for up to four PoE cameras.

Extension Function:Provides a modern,universal SSI(Synchronous Serial Interface)feedback solution for PLC-based systems.Expandable to 6 2-channel modules,allowing users to connect up to 12 SSI sensors such as rotary encoders,linear sensors,barcode readers,and laser distance sensors through a single network connection interface.

ABB PFSK152 3BSE018877R1缩略图

ABB PFSK152 3BSE018877R1

ABB PFSK152 3BSE018877R1 Product Details

Product Overview

ABB PFSK152 3BSE018877R1 is a signal concentrator module produced by ABB.It is commonly used in industrial automation systems to centrally collect and process signals from multiple sensors or field devices.

Main functions

Signal concentration:Concentrate multiple scattered analog or digital signals into one module for unified processing.

Signal conditioning:Filter,amplify,isolate and process the collected signals to meet the requirements of subsequent equipment.

Signal conversion:Convert analog signals to digital signals,or convert digital signals to analog signals.

Communication interface:Provides a variety of communication interfaces,such as PROFIBUS,MODBUS,etc.,to facilitate communication with the host computer or other devices.

ABB PFSK152 3BSE018877R1插图 ABB PFSK152 3BSE018877R1插图1 ABB PFSK152 3BSE018877R1插图2

Possible application scenarios

Process control system:Used to collect process parameters such as temperature,pressure,flow,etc.to achieve real-time monitoring and control of the production process.

Machine automation:Used to collect machine operation status data to achieve fault diagnosis and predictive maintenance.

Environmental monitoring:used to collect environmental monitoring data and realize real-time monitoring of environmental quality.

Technical features(may include but are not limited to)

High integration:multiple signal channels are integrated to save installation space.

High reliability:industrial-grade design with high reliability,suitable for harsh industrial environments.

Flexible configuration:the module can be flexibly configured through software to meet different application requirements.

Modular design:convenient for expansion and maintenance.

0574-A-012 0574-A-0131缩略图

0574-A-012 0574-A-0131

0574-A-012 and 0574-A-0131 are products produced by Honeywell.These two products usually appear as industrial control DCS(distributed control system)system modules or servo motor modules.The following are the details of these two products:

1.Industrial control DCS system module

Distributed control:These two modules allow for distributed control and monitoring throughout the industrial process.This design improves the scalability and reliability of the system.

Real-time monitoring:They can monitor process parameters,equipment status and operating conditions in real time,providing operators with timely information support for decision-making.

Automation control:Supports automation control strategies such as feedback control,PID(proportional-integral-differential)control and advanced control strategies,which helps to achieve optimization and stable operation of industrial processes.

Communication interface:Usually equipped with multiple communication interfaces,such as Ethernet,Modbus,Profibus,etc.,to facilitate communication with different types of equipment and sensors.

0574-A-012 0574-A-0131插图 0574-A-012 0574-A-0131插图1 0574-A-012 0574-A-0131插图2

Data acquisition and recording:Able to collect and store process data for subsequent analysis,troubleshooting and quality control.

Alarm and event management:Supports real-time alarm and event management functions.When the system status exceeds the predetermined range,an alarm will be triggered and the event history will be recorded.

Modular design:DCS systems usually adopt modular design.These two modules also allow addition,upgrade or replacement according to actual needs to adapt to changes in industrial processes.

Security:It has security functions,including user authentication,data encryption and secure access control to protect the system from unauthorized access and threats.

Visual interface:Provides an intuitive visual interface that enables operators to easily monitor and control industrial processes.

2.Servo motor module

High-precision motion control:These two servo motor modules can achieve high-precision motion control for precise control of motion parameters such as position,speed and acceleration.

Feedback control:Usually equipped with feedback sensors(such as encoders or decoders)to monitor the motor motion status in real time and provide feedback signals to achieve closed-loop control.

Multi-axis control:Some servo motor modules may support multi-axis control functions,which can control multiple servo motors at the same time and realize the coordinated motion of multiple motion axes.

Programmability:Users can configure and customize according to specific application requirements to achieve customized motion control logic and functions.

High-performance processor:The servo motor module may be equipped with a high-performance processor to ensure real-time and stable motion control.

Easy to install and maintain:These two modules may be designed in an easy-to-install and maintain style,allowing users to operate quickly and easily.

A-B 1756-PA72 C缩略图

A-B 1756-PA72 C

A-B 1756-PA72 C Product Details

Product Overview

1756-PA72 C is a standard power supply module for the ControlLogix series PLC produced by Rockwell Automation.It is mainly used to provide stable power for modules on the ControlLogix rack.

Main Features

Wide voltage input:Supports wide voltage input of 85-265V AC,suitable for power supply environments in different regions of the world.

Multiple outputs:Provides 1.2V,3.3V,5V and 24V multiple DC outputs to meet the power supply needs of different modules.

A-B 1756-PA72 C插图 A-B 1756-PA72 C插图1 A-B 1756-PA72 C插图2

High reliability:Adopts industrial-grade design,with overload and short-circuit protection functions to ensure stable operation of the system.

Easy to install:Compact design,simple installation,can be directly inserted into the ControlLogix rack.

Compliant with standards:Complies with relevant safety certification standards to ensure product quality and safety.

Back to Top

Search For Products

Product has been added to your cart