YOKOGAWA PW441-10缩略图

YOKOGAWA PW441-10

Yokogawa PW441-10 Product Detailed Analysis

Product Overview

Yokogawa PW441-10 is a power module produced by Yokogawa Electric,mainly used to provide power for devices in its V-net network.V-net is an industrial fieldbus developed by Yokogawa Electric and is widely used in process control systems.As a power module,PW441-10 provides stable power supply for various devices connected to V-net.

Product Features

Designed for V-net:Specially designed for the power supply needs of V-net network to ensure the stable operation of network devices.

High reliability:Adopting industrial-grade design,it has overload protection,short-circuit protection and other functions to ensure the safe operation of equipment.

Easy to install:Simple installation,no complex configuration required.

YOKOGAWA PW441-10插图 YOKOGAWA PW441-10插图1 YOKOGAWA PW441-10插图2

Main functions

Power supply:Provide stable power for devices connected to V-net.

Overload protection:When the load is too large,the power supply is automatically cut off to protect the equipment.

Short-circuit protection:When a short circuit occurs,the power supply is automatically cut off to protect the equipment.

Technical parameters(typical values,please refer to the product manual for specific parameters)

Input voltage:100-120VAC

Output current:1.4A

Operating temperature:0℃~55℃

YOKOGAWA F3BU05-0D缩略图

YOKOGAWA F3BU05-0D

Yokogawa F3BU05-0D Product Detailed Analysis

Product Overview

Yokogawa F3BU05-0D is a base module of Yokogawa FA-M3 series PLC.It provides a solid foundation for the PLC system and can be installed with various other functional modules,such as CPU module,I/O module,etc.

Product Features

Multi-slot design:Provides 5 slots,which can flexibly install various functional modules to meet different control needs.

High reliability:Adopts industrial-grade design,has high reliability,and can operate stably for a long time in harsh industrial environments.

Easy to install:Simple installation without complex configuration.

YOKOGAWA F3BU05-0D插图 YOKOGAWA F3BU05-0D插图1 YOKOGAWA F3BU05-0D插图2

Main functions

Module mounting base:Provides a solid platform for installing other functional modules.

Power distribution:Provides power for the modules installed on it.

Signal connection:Provides signal connection points to achieve communication between modules.

YOKOGAWA F3AD08-1R缩略图

YOKOGAWA F3AD08-1R

Yokogawa F3AD08-1R Product Detailed Analysis

Product Overview

Yokogawa F3AD08-1R is an analog input module produced by Yokogawa,mainly used in Yokogawa FA-M3 series programmable controllers.The module can convert external analog signals(such as voltage and current)into digital signals for PLC processing and control.

Product Features

High Precision:Provides high-precision analog signal conversion to ensure the accuracy of measurement data.

Flexible Configuration:Can be flexibly configured according to different application requirements,such as input range,sampling frequency,etc.

High Reliability:Adopts industrial-grade design,has high reliability,and can operate stably for a long time in harsh industrial environments.

Easy to Install:Simple installation,no complex configuration required.

YOKOGAWA F3AD08-1R插图 YOKOGAWA F3AD08-1R插图1 YOKOGAWA F3AD08-1R插图2

Main Functions

Analog Signal Acquisition:Collect external analog signals,such as voltage and current.

Signal Conversion:Convert analog signals into digital signals for PLC processing.

Isolation Protection:Provides input/output isolation to improve system safety.

Technical parameters(typical values,please refer to the product manual for specific parameters)

Number of input channels:8 channels

Input signal range:0~5VDC or 1~5VDC

Resolution:12 bits

Sampling rate:configurable

Power supply voltage:24VDC

KJ3002X1-BF1缩略图

KJ3002X1-BF1

KJ3002X1-BF1 Product Details

Product Overview

KJ3002X1-BF1 is an RTD input module in the Emerson DeltaV system.It is mainly used to collect and process temperature signals from thermal resistors(RTDs),convert analog signals into digital signals,and transmit them to the DeltaV system for further processing.

Main Functions

RTD Signal Acquisition:Connect to thermal resistor sensors to collect temperature signals.

Signal Conversion:Convert analog RTD signals into digital signals.

Signal Processing:Filter and linearize the collected signals.

Data Output:Transmit the processed data to the DeltaV system.

KJ3002X1-BF1插图 KJ3002X1-BF1插图1 KJ3002X1-BF1插图2

Product Features

High Precision:Use high-precision ADC to ensure the accuracy of the measurement results.

Multi-channel:Support multiple RTD channels and can collect multiple temperature points at the same time.

Modular Design:Modular structure for easy installation and maintenance.

High Reliability:Suitable for harsh industrial environments.

Typical Application Scenarios

Process Industry:Used to measure the temperature of process fluids,such as petroleum,chemical,and electric power industries.

Environmental Monitoring:Used to measure ambient temperature.

Technical parameters(general parameters,please refer to the product manual for specific parameters)

Input signal:RTD signal

Number of channels:12 channels

Accuracy:high accuracy

Operating temperature:-20℃~+60℃

Power supply voltage:24VDC

KJ2221X1-BA1缩略图

KJ2221X1-BA1

KJ2221X1-BA1 Product Details

Product Overview

KJ2221X1-BA1 is a SISNet repeater module in the Emerson DeltaV system.SISNet is a digital communication network dedicated to the Emerson DeltaV Safety Instrumented System(SIS)for transmitting safety-related signals and data between different devices.As a node in the SISNet network,KJ2221X1-BA1 plays the role of signal amplification and relay to ensure the reliable transmission of safety signals.

Main Functions

Signal Amplification:Enhance SISNet network signals and extend network transmission distance.

Signal Relay:Transfer signals from one network segment to another to expand network coverage.

Isolation Protection:Provide electrical isolation to prevent network failures from affecting other devices.

KJ2221X1-BA1插图 KJ2221X1-BA1插图1 KJ2221X1-BA1插图2

Product Features

Suitable for harsh environments:Designed for industrial environments with high reliability and durability.

Easy to install:Modular design,easy to install.

Comply with safety standards:Comply with relevant safety standards to ensure system safety.

Typical application scenarios

Process industry:used in SIS systems in petrochemical,power and other industries to ensure process safety.

Safety instrument system:as a component of the SISNet network,it realizes reliable transmission of safety signals.

Technical parameters(general parameters,please refer to the product manual for specific parameters)

Power supply voltage:24VDC

Communication protocol:SISNet

Operating temperature:-20℃~+60℃

GE IS420UCSBH4A缩略图

GE IS420UCSBH4A

GE IS420UCSBH4A Product Details

Product Overview

GE IS420UCSBH4A is a high-performance UCSB controller module designed by General Electric(GE)for its Mark VIe series turbine control system.It uses Intel EP80579 processor,running at up to 1066 MHz,providing powerful computing power for complex control algorithms and data processing.

Main Functions

Control Logic Execution:Implement complex control algorithms such as startup,shutdown,load regulation,etc.

Data Processing:Process signals from various sensors and actuators,perform data analysis and calculations.

Human-computer interaction:Interact with the operator interface to provide real-time data display and control functions.

System Integration:Integrate with other Mark VIe system components to achieve overall control of the system.

GE IS420UCSBH4A插图 GE IS420UCSBH4A插图1 GE IS420UCSBH4A插图2

Product Features

High Performance:Powerful processor and high-speed bus ensure high performance and real-time response of the system.

Flexible Configuration:Can be flexibly configured according to different application requirements.

Modular Design:Modular structure for easy system expansion and maintenance.

High Reliability:Industrial-grade design for harsh industrial environments.

Typical application scenarios

Gas turbine:used to control the start,shutdown,load regulation,etc.of gas turbines.

Steam turbine:used to control the start,shutdown,load regulation,etc.of steam turbines.

Combined cycle power generation:used to control the various components of the combined cycle power generation system.

Technical parameters(general parameters,please refer to the product manual for specific parameters)

Processor:1066 MHz Intel EP80579

Memory:large capacity memory

Interface:multiple interfaces,including digital interface,analog interface,etc.

Operating temperature:-20℃~+60℃

Power supply voltage:24V DC

GE IS220PVIBH1A缩略图

GE IS220PVIBH1A

GE IS220PVIBH1A Product Details

Product Overview

GE IS220PVIBH1A is a vibration monitoring module developed by General Electric(GE)for its Mark VIe control system.It is mainly used to monitor the vibration of key components of industrial equipment such as turbines,compressors,etc.,so as to achieve equipment fault diagnosis and predictive maintenance.

Main Functions

Vibration Signal Acquisition:Connect to the vibration sensor to collect vibration signals.

Signal Processing:Filter and amplify the collected vibration signals to extract effective features.

Vibration Analysis:Based on the extracted features,analyze the vibration state of the equipment to determine whether there is an abnormality.

Alarm Output:When the vibration signal exceeds the set threshold,an alarm signal is issued.

Data Output:Transmit vibration data to the host computer for more in-depth analysis and storage.

GE IS220PVIBH1A插图 GE IS220PVIBH1A插图1 GE IS220PVIBH1A插图2

Product Features

High Precision:Use high-precision sensors and advanced signal processing algorithms to ensure the accuracy of vibration data.

Real-time Monitoring:Collect and analyze vibration data in real time to detect potential faults in a timely manner.

Modular Design:Modular structure for easy system expansion and maintenance.

Easy to integrate:Can be easily integrated into GE Mark VIe control systems.

Typical application scenarios

Power plants:Monitor the vibration of equipment such as turbines and generators.

Petrochemical industry:Monitor the vibration of equipment such as compressors and pumps.

Other industrial fields:Monitor the vibration of various rotating machinery.

GE IS215VCMIH2BB缩略图

GE IS215VCMIH2BB

GE IS215VCMIH2BB Product Details

Product Overview

GE IS215VCMIH2BB is a VME communication interface card designed by General Electric(GE)for its Speedtronic Mark VI turbine control system.It is mainly used to connect different components of the Mark VI system to achieve data exchange and system integration.This product is usually used in power plants,petrochemical and other industrial fields to provide control and monitoring for large rotating machinery.

Main Functions

VME Interface:Provides a VME bus interface for connecting other VME modules or devices.

Communication Interface:Supports multiple communication protocols to achieve communication between different devices.

Data Conversion:Convert different types of signals to achieve interconnection between systems.

Data Processing:Process and analyze data to provide support for upper-level applications.

GE IS215VCMIH2BB插图 GE IS215VCMIH2BB插图1 GE IS215VCMIH2BB插图2

Product Features

High Reliability:Industrial-grade design,suitable for harsh industrial environments.

High Performance:Fast processing speed,able to meet the needs of real-time control.

Modular Design:Modular structure,easy system expansion and maintenance.

Good Compatibility:Compatible with other components of the GE Mark VI system.

Typical Application Scenarios

Power Plant:Used to connect the Mark VI system with other control systems or equipment.

Petrochemical Industry:Used to connect the Mark VI system with field instruments or other control systems.

Other Industrial Fields:Used in situations where process control and monitoring are required.

GE IS215VCMIH2CA缩略图

GE IS215VCMIH2CA

GE IS215VCMIH2CA is a high-performance turbine control module.Here are the details of the product:

I.Product Overview

IS215VCMIH2CA is a module provided by General Electric(GE)for monitoring and controlling the operation of turbines.It has a variety of features and functions to ensure the safe and efficient operation of turbines.

II.Main Features

Turbine Monitoring:

It can monitor various key parameters of turbines,such as temperature,pressure,speed,fuel flow,etc.

By monitoring these parameters in real time,it ensures that the turbine operates within a safe and effective working range.

GE IS215VCMIH2CA插图 GE IS215VCMIH2CA插图1 GE IS215VCMIH2CA插图2

Control Function:

Perform basic control operations,such as adjusting fuel flow,ignition timing,etc.

It can perform more complex control operations,such as adjusting the combustion process,optimizing fuel supply,adjusting the turbine blade angle,etc.,to ensure the performance of the turbine under different load and environmental conditions.

Communication Interface:

Supports multiple communication interfaces,such as RS232,RS485 or CAN bus,etc.

Four-port connectors are integrated into the front panel of the IS215VCMIH2CA,including an RS-232C serial port,a D-type plug connector,and three IONet 10Base2 Ethernet connectors,which facilitate data exchange and remote control with other devices or control systems.

High stability and compatibility:

The IS215VCMIH2C digital input module adopts advanced circuit design and high-quality components,with high stability and reliability.

It can operate stably in various harsh industrial environments.

Compatible with a variety of PLC controllers and data acquisition systems,it can be seamlessly integrated with other GE products,improving the interoperability and compatibility of equipment.

III.Application areas

The IS215VCMIH2CA turbine module has a wide range of applications,including but not limited to:

Power generation:In power plants,it is used to monitor and control the operation of the turbine to ensure that it generates electricity efficiently and safely.

Energy industry:In the oil and gas industry,it is usually used to compress natural gas or provide power.

Industrial process:In some industrial processes that require a lot of power,it is used to provide power and control and monitor the operation of the turbine.

Aviation field:It may be used to monitor and control the performance of aircraft engines.

GE IS215UCVHM06A缩略图

GE IS215UCVHM06A

GE IS215UCVHM06A Product Details

Product Overview

GE IS215UCVHM06A is a universal controller module designed by General Electric(GE)for its Mark VIe series distributed turbine control system.It plays a vital role in GE’s turbine control system and is responsible for performing various control logic and data processing tasks.

Main Functions

Control Logic:Implement various control functions of the turbine,including start-up,shutdown,load regulation,etc.

Data Processing:Process signals from various sensors and actuators,perform data analysis and calculations.

Human-computer interaction:Interact with the operator interface to provide real-time data display and control functions.

GE IS215UCVHM06A插图 GE IS215UCVHM06A插图1 GE IS215UCVHM06A插图2

Product Features

High Reliability:Industrial-grade design,suitable for harsh industrial environments.

High Performance:Fast processing speed,able to meet the needs of real-time control.

Modular Design:Modular structure,easy system expansion and maintenance.

Flexible Configuration:Can be flexibly configured according to different application requirements.

Typical Application Scenarios

Gas Turbine:Used to control the start-up,shutdown,load regulation,etc.of gas turbines.

Steam turbine:used to control the start,shutdown,load regulation,etc.of the steam turbine.

Combined cycle power generation:used to control the various components of the combined cycle power generation system.

Back to Top

Search For Products

Product has been added to your cart